## Product Overview of DELL 462-5884 The DELL 462-5884 is a sophisticated Managed L2+ switch equipped with a total of 48 Power over Ethernet Plus (PoE+) Ethernet ports and two 10-Gigabit SFP+ uplink ports. This device is designed to provide robust performance for modern networking demands. ### Key Attributes ? Type: Managed Switch with 48 Ports – Layer 2+ ? Form Factor: Rack-Mountable, 1U Size ? Subtype: Gigabit Ethernet ? Port Configuration: 48 x 10/100/1000 Mbps + 2 x 10 Gigabit SFP+ ### Power and Performance #### Power over Ethernet (PoE+) Facilitates power delivery alongside data transmission, enabling efficient device integration. #### Performance Metrics ? Switching Fabric Bandwidth: 220 Gbps ? Forwarding Capacity: 164 Million packets per second (Mpps) ? Stacking Bandwidth: 84 Gbps ### Capacity and Scalability #### Virtual Interfaces and Routing ? VLAN Capacity: Up to 4096 ? ARP Entries: 1024 ? NDP Entries: 400 #### Advanced Routing Features ? Static IPv4 Routes: 256 ? Dynamic IPv4 Routes: 256 ? IPv6 Routing: 128 Static Routes ### Access Control and Security #### Access Control Lists (ACL) ? Maximum ACL Rules (System-wide): 2048 ? Per Interface Rules (IPv4): 1024 Ingress / 512 Egress ? Per Interface Rules (IPv6): 512 Ingress / 256 Egress ### Management and Monitoring ? Remote Management Protocols: Telnet, TFTP ? Management Features: Dual Firmware Images, Management Information Base (MIB) ? Monitoring Capabilities: Port Mirroring, Broadcast Storm Control ### Energy Efficiency and Design This switch supports Energy Efficient Ethernet, designed for lower power consumption while maintaining optimal performance. The front-to-back airflow design aids in effective cooling, enhancing the switch’s operational reliability. ### Redundancy and Reliability Equipped with redundant fans, this switch ensures continuous operation, making it a reliable choice for critical networking environments. Dell N2048P 48 Ethernet Ports 1GbE PoE+ 2p SFP+ Rack-mountable 1u Switch with part number 462-5884. ## Ports The Dell N2048P Ethernet Switch is equipped with an impressive 48 ports, making it an ideal solution for businesses and organizations that require a high level of connectivity. With such a large number of ports, users can easily connect multiple devices to the switch, including computers, servers, printers, and other network devices. ### Increased Flexibility and Scalability Having 48 ports on the Dell N2048P Ethernet Switch provides users with increased flexibility and scalability. Businesses can easily expand their network infrastructure as their needs grow without having to invest in additional switches or equipment. The abundance of ports ensures that there is ample room for future expansion and the ability to accommodate more devices. #### Efficient Network Management With 48 ports, users can effectively manage their network by organizing devices into logical groups based on their purpose or department. This allows for easier troubleshooting, monitoring, and maintenance of the network. Additionally, the switch’s built-in management features enable administrators to configure and control each port individually, ensuring optimal performance and security. ##### Enhanced Performance and Speed The Dell N2048P Ethernet Switch’s 48 ports provide users with enhanced performance and speed. Each port supports Gigabit Ethernet (1GbE) connectivity, enabling fast data transfer rates and minimizing latency. This is especially beneficial for businesses that handle large amounts of data or require real-time communication between devices. ## Speed The speed feature of the Dell N2048P Ethernet Switch is one of its key advantages. With support for 1GbE (Gigabit Ethernet), this switch delivers lightning-fast data transfer rates, ensuring that users can access and share information quickly and efficiently. ### Improved Productivity By offering 1GbE speed, the Dell N2048P Ethernet Switch significantly improves productivity in a network environment. Whether it’s transferring large files, streaming high-definition videos, or accessing cloud-based applications, users will experience minimal delays and seamless performance. This boosts overall productivity by reducing waiting times and allowing for faster completion of tasks. #### Enhanced Multimedia Experience With 1GbE speed, the Dell N2048P Ethernet Switch ensures an enhanced multimedia experience for users. Streaming videos, online conferences, and multimedia presentations are all supported without buffering or lag. This is particularly crucial for businesses that heavily rely on multimedia content or require high-quality video conferencing for collaboration. ##### Future-Proofing The 1GbE speed of the Dell N2048P Ethernet Switch ensures future-proofing for businesses. As technology advances and network demands increase, having a switch with 1GbE capability ensures compatibility with future devices and applications. It allows organizations to stay ahead of the curve and avoid costly upgrades in the near future. ## PoE+ One of the standout features of the Dell N2048P Ethernet Switch is its support for PoE+ (Power over Ethernet Plus). With PoE+, the switch can deliver both data and power to connected devices over a single Ethernet cable, eliminating the need for separate power sources and simplifying installation. ### Simplified Deployment The PoE+ feature of the Dell N2048P Ethernet Switch simplifies deployment by reducing cable clutter and power infrastructure requirements. Devices such as IP phones, wireless access points, and surveillance cameras can be conveniently powered through the switch, eliminating the need for additional power outlets or adapters. This streamlines installation and reduces costs associated with electrical work. #### Flexibility in Device Placement With PoE+ support, devices can be placed in locations where power outlets are not easily accessible. This provides greater flexibility in device placement, allowing businesses to optimize their network infrastructure without being limited by power availability. It also reduces the need for extension cords or dedicated power lines, further simplifying the setup process. ##### Cost and Energy Efficiency By utilizing PoE+ technology, the Dell N2048P Ethernet Switch promotes cost and energy efficiency. With power being delivered over the Ethernet cable, there is no need for separate power supplies, resulting in reduced hardware costs. Additionally, PoE+ enables intelligent power management, allowing devices to consume only the power they require, leading to energy savings and lower electricity bills. ## SFP+ The Dell N2048P Ethernet Switch features 2 SFP+ (Small Form-factor Pluggable Plus) ports, providing users with additional high-speed connectivity options. SFP+ ports are designed for fiber optic connections and can support data transfer rates of up to 10 Gigabits per second (10GbE). ### Enhanced Network Performance The inclusion of SFP+ ports in the Dell N2048P Ethernet Switch enhances network performance by offering high-speed connectivity options. These ports enable users to connect the switch to other switches or network devices using fiber optic cables, ensuring faster and more reliable data transfer over longer distances. This is particularly beneficial for businesses that require high bandwidth and low latency connections. #### Scalability and Future-Proofing The availability of SFP+ ports on the Dell N2048P Ethernet Switch ensures scalability and future-proofing for network infrastructure. As network demands grow, businesses can easily upgrade their connection speeds by utilizing the 10GbE capability of the SFP+ ports. This allows for seamless expansion without the need to replace the entire switch or invest in additional equipment. ##### Flexible Network Design SFP+ ports offer flexibility in network design as they can be used to connect switches or devices located in different areas or buildings. With fiber optic cables, users can establish high-speed connections over longer distances without experiencing degradation in performance. This is particularly useful for businesses with multiple locations or complex network setups. ## Form Factor The Dell N2048P Ethernet Switch boasts a rack-mountable 1u form factor, making it suitable for installation in standard server racks. The 1u height allows for efficient use of space and easy integration into existing network environments. ### Space Optimization The 1u form factor of the Dell N2048P Ethernet Switch is designed to maximize space utilization in server racks. With its compact size, the switch takes up minimal vertical space, allowing for more devices to be installed in the same rack. This is particularly beneficial for businesses with limited rack space or those planning to expand their network infrastructure. #### Ease of Installation The rack-mountable design of the Dell N2048P Ethernet Switch ensures easy installation and integration into existing network environments. It can be seamlessly mounted in standard server racks without the need for additional brackets or modifications. This simplifies the deployment process and reduces downtime during installation. ##### Aesthetically Pleasing Setup The rack-mountable form factor not only provides practical benefits but also contributes to an aesthetically pleasing network setup. The switch neatly fits into the rack, eliminating cable clutter and creating a clean and organized appearance. This is particularly important for businesses that have customer-facing areas where a professional and tidy network setup is desired. ## Part Number The Dell N2048P Ethernet Switch’s part number is 462-5884, which serves as a unique identifier for this specific model. Understanding the importance of the part number can assist users in identifying and procuring the correct switch model for their specific needs. ### Model Differentiation The part number, 462-5884, differentiates the Dell N2048P Ethernet Switch from other switch models in the Dell product lineup. It helps users easily identify and procure the specific switch they require, ensuring compatibility with their existing network infrastructure and avoiding any potential confusion or compatibility issues. #### Ordering and Support The part number plays a crucial role in the ordering and support processes. When placing an order for the Dell N2048P Ethernet Switch, users can simply provide the part number to ensure they receive the correct model. Additionally, when seeking technical support or warranty services, the part number helps streamline the troubleshooting and assistance process by identifying the exact switch model in question. ##### Future Reference and Documentation The part number serves as a reference point for future documentation and reference purposes. Whether it’s for inventory management, network documentation, or equipment audits, having the part number readily available ensures accurate record-keeping and easy identification of the Dell N2048P Ethernet Switch in various contexts.