JG938A HPE 5130-24g 2sfp+2xgt Ei 24 Ports L3 Switch Rack-mountable

## Product Overview of HPE JG938A
The HPE JG938A 5130-24G-2SFP+-2XGT Ei is a versatile, managed switch equipped with 24 ports, ideal for rack-mounting.
#### Key Features
? Type: Managed Switch, L3, Stackable, 24 Ports
? Rack-Mountable: Yes, 1U Form Factor
? Ethernet Subtype: Gigabit Ethernet
#### Port Configuration
? 24 Ports: 10/100/1000 Mbps
? 2 x 10 Gigabit SFP+
? 1 x Gigabit SFP+
? 2 x 10 Gigabit Ethernet Ports
### Performance Metrics
#### Throughput and Capacity
? Throughput: 96 Mpps
? Routing/Switching Capacity: 128 Gbps
? MSTP Instances: Up to 64
? Simultaneous VLANs: 4094
? IPv4 Routing Table Entries: 512
? IPv6 Routing Table Entries: 256
? MAC Address Table Size: 16,384 Entries
? Jumbo Frame Support: 9 KB
#### Supported Routing Protocols
? RIP-1, RIP-2
? IGMP
? Static IPv4 Routing
? Static IPv6 Routing
### Management and Security
#### Remote Management Protocols
? SNMP v1, v2c, v3
? RMON
? Telnet
? HTTPS
? TFTP
? SSH-2, SCP
#### Encryption and Authentication
? Encryption Algorithm: SSL
? Authentication Methods: SSH, RADIUS, TACACS, TACACS+, SSH2, HWTACACS
### Advanced Features
#### Key Functionalities
? Flow Control and DHCP Support
? ARP Support
? VLAN Support
? Auto-uplink (Auto MDI/MDI-X)
? Syslog Support
? Weighted Round Robin (WRR) Queuing
? IPv6 Support
? sFlow
? Spanning Tree Protocol (STP) Support
? Rapid Spanning Tree Protocol (RSTP) Support
? Virtual Router Redundancy Protocol (VRRP) Support
? Multiple Spanning Tree Protocol (MSTP) Support
? Port Aggregation Protocol (PAgP) Support
? Access Control List (ACL) Support
? Quality of Service (QoS)
? Committed Access Rate (CAR)
? DHCP Server
? Device Link Detection Protocol (DLDP) Support
? Equal-Cost Multipath (ECMP)
? STP Root Guard
? IPv4 Support
? LLDP Support
? Smart Link Pass-Through
? Dynamic ARP Protection
? DHCP Protection
? Port Isolation
? Non-Blocking Ports
? Strict Priority (SP)
? Intelligent Resilient Framework Technology (IRF)
? 1.5 MB Packet Buffer
? OpenFlow Support
? IP Source Guard
### Compliance Standards
? IEEE 802.3, IEEE 802.3u
? IEEE 802.1d, IEEE 802.1q
? IEEE 802.3ab, IEEE 802.1p
? IEEE 802.3x, IEEE 802.1w
? IEEE 802.1x, IEEE 802.3ae
? IEEE 802.1s, IEEE 802.1ad
? IEEE 802.3ah, IEEE 802.1ab (LLDP)
? IEEE 802.1ak, IEEE 802.3az
### Hardware Specifications
#### Memory and Storage
? RAM: 1 GB SDRAM
? Flash Memory: 512 MB
### Expansion and Connectivity Options
#### Interface Options
? 24 x 1000BASE-T – RJ-45
? 2 x Gigabit / 10Gbit LAN – SFP+
? 2 x Gigabit / 10Gbit LAN – RJ-45
? 1 x Serial (Console) – RJ-45
### Power Requirements
? Power Device: External Power Adapter
? Voltage Required: AC 120/230 V
HPE 5130-24g 2sfp+2xgt Ei 24 Ports L3 Managed Rack-mountable Stackable Switch (JG938A)
## Ports
The HPE 5130-24g 2sfp+2xgt Ei L3 Switch comes equipped with 24 ports, making it an ideal choice for businesses and organizations that require a high number of network connections. These ports provide users with the ability to connect multiple devices, such as computers, printers, servers, and other networking equipment, to the switch.
### Increased Connectivity
With 24 ports, this switch offers increased connectivity options for users. It provides ample room for expansion and allows businesses to easily connect multiple devices without the need for additional switches or complicated setups. Whether you have a small office or a large enterprise, the 24 ports on this switch ensure that you have enough connections to support your network requirements.
### Flexibility in Network Design
The 24 ports on the HPE 5130-24g 2sfp+2xgt Ei L3 Switch allow for greater flexibility in network design. Users can easily create VLANs (Virtual Local Area Networks) and segregate traffic based on different departments or security requirements. This feature enables efficient network management and enhances overall network performance.
### Improved Network Performance
Having more ports on a switch means less congestion and improved network performance. With 24 ports, this switch can handle high volumes of data traffic without compromising speed or efficiency. It ensures that your network operates smoothly even during peak usage times, preventing bottlenecks and slowdowns.
#### Scalability
The 24 ports on this HPE switch offer scalability options for growing businesses. As your organization expands, you can easily add more devices to the network without worrying about running out of available ports. This scalability feature ensures that your network infrastructure can adapt to your evolving needs without requiring significant upgrades or replacements.
#### Cost-Effective Solution
By providing 24 ports in a single switch, the HPE 5130-24g 2sfp+2xgt Ei L3 Switch offers a cost-effective solution for networking needs. It eliminates the need for purchasing multiple switches or investing in complex network setups. This switch provides a centralized and efficient solution that saves both money and valuable rack space.
##### Reduced Cable Clutter
With 24 ports, users can connect multiple devices to a single switch, reducing cable clutter and simplifying cable management. This not only enhances the aesthetics of your network setup but also improves overall maintenance and troubleshooting processes. With fewer cables to manage, it becomes easier to identify and resolve any connectivity issues that may arise.
##### Enhanced Productivity
The 24 ports on this switch contribute to enhanced productivity within the organization. Users can connect their devices directly to the switch, ensuring a reliable and stable network connection. This eliminates the need for relying on Wi-Fi or shared connections, resulting in faster data transfer speeds and improved productivity for employees.
## Rack-mountable
The HPE 5130-24g 2sfp+2xgt Ei L3 Switch is rack-mountable, providing users with the convenience and flexibility of easily integrating it into their existing network infrastructure.
### Space Efficiency
The rack-mountable design of this switch allows for efficient utilization of rack space. It can be mounted in standard server racks, saving valuable floor space in data centers or equipment rooms. By consolidating networking equipment into a rack-mounted setup, businesses can optimize their physical footprint and create a more organized network environment.
### Easy Installation and Maintenance
Rack-mountable switches offer easy installation and maintenance processes. They can be securely mounted in a rack using standardized mounting brackets, ensuring stability and minimizing the risk of accidental damage. This feature simplifies the initial setup and ongoing maintenance tasks, allowing network administrators to focus on other critical aspects of network management.
#### Improved Airflow and Cooling
When mounted in a rack, the HPE 5130-24g 2sfp+2xgt Ei L3 Switch benefits from improved airflow and cooling. Racks typically have ventilation systems that promote proper airflow, preventing devices from overheating. This ensures that the switch operates at optimal temperatures, enhancing its overall performance and reliability.
#### Centralized Network Management
Rack-mountable switches enable centralized network management. With all networking equipment neatly organized in a single location, administrators can easily access and manage the switch along with other devices. The centralized approach streamlines network monitoring, troubleshooting, and configuration processes, improving overall network efficiency.
##### Scalability and Expansion
Rack-mountable switches offer scalability options for businesses planning future expansions. As your network grows, you can add more rack-mounted switches to accommodate increased connectivity requirements. This scalability feature simplifies network expansion without disrupting existing infrastructure, ensuring a seamless transition as your organization evolves.
##### Physical Security
Mounting the HPE 5130-24g 2sfp+2xgt Ei L3 Switch in a rack enhances physical security. Racks are typically located in secure areas with restricted access, minimizing the risk of unauthorized tampering or theft. By keeping critical networking equipment in a locked rack, businesses can safeguard their infrastructure and protect sensitive data from potential threats.
## Part Number
The HPE 5130-24g 2sfp+2xgt Ei L3 Switch’s part number is JG938A. While it may seem like a simple alphanumeric code, the part number holds significance for users and network administrators.
### Identification and Compatibility
The part number serves as a unique identifier for the HPE 5130-24g 2sfp+2xgt Ei L3 Switch model. It ensures that users can easily identify and locate the specific switch they require when ordering or troubleshooting. Additionally, the part number is essential for compatibility purposes, ensuring that any accessories or replacement parts purchased are compatible with the specific switch model.
### Warranty and Support
The part number is crucial when it comes to warranty and support services. When contacting HPE or authorized service providers for technical assistance or warranty claims, providing the correct part number helps expedite the process. It allows support personnel to quickly identify the exact switch model and provide appropriate solutions or replacements, minimizing downtime and ensuring uninterrupted network operations.
#### Documentation and Resources
The part number is often referenced in manufacturer documentation and resources. It helps users locate relevant manuals, guides, firmware updates, and other resources specific to their switch model. This availability of dedicated resources simplifies the configuration and maintenance processes, empowering users to optimize the switch’s performance and take full advantage of its features.
#### Inventory Management
For businesses with multiple switches or a diverse network infrastructure, the part number plays a vital role in inventory management. System administrators can use the part number to track and manage their networking equipment more efficiently. It enables accurate record-keeping, simplifies asset management, and ensures that the right parts are readily available when needed for maintenance or expansion.
##### Ease of Ordering
The part number facilitates a streamlined ordering process for businesses. When purchasing additional switches or accessories, having the correct part number eliminates any ambiguity or confusion during the ordering process. It ensures that you receive the exact product you require, minimizing delays and potential compatibility issues.
##### Future Upgrades and Replacements
The part number is crucial for future upgrades or replacements. As technology evolves, newer models may be introduced, and older models may become obsolete. By referring to the part number, users can accurately identify their switch model and determine compatibility with newer versions. This information helps in planning for future upgrades or replacements, ensuring that your network infrastructure remains up to date and efficient.