Home / Network Switches / 48 Port (1058)

Filter Close
View as
  • Quick view

    N3K-C3048TP-1GE Cisco Nexus 48-Port Layer 3 Switch

    £219.16£262.99 Incl. VAT

    Key Specifications of the N3K-C3048TP-1GE Switch ### Device Overview ? Device Type: Managed Network Switch with 48 Ports ? Enclosure Design: 1U Rack-Mountable ? Interface Type: 10 Gigabit Ethernet ### Port and Interface Details ? Ports: 48 x 10/100/1000 Mbps and 4 x 10 Gigabit SFP+ ### Performance Metrics ? Switching Capacity: 176 Gbps ? Forwarding Performance: 132 Million Packets Per Second (Mpps) ### Capacity and Protocol Support #### Virtual Interfaces and Protocol Instances ? Virtual LANs (VLANs): Up to 4096 ? Multiple Spanning Tree Protocol (MSTP) Instances: 64 ? Rapid Spanning Tree Protocol (RSTP) Instances: 512 #### Address Table and Frame Support ? MAC Address Table Capacity: 128,000 Entries ? Jumbo Frame Support: Up to 9216 Bytes #### Routing and Management Protocols ? Routing Protocols: BGP, IGMPv2, IGMPv3 ? Remote Management: SNMP v1, v2, v3, RMON, Telnet, SSH-2, CLI ### Advanced Features ? VLAN Support: Comprehensive VLAN management ? Syslog Support: Yes ? Storm Control: Broadcast, Multicast, and Unicast Storm Control ? Weighted Random Early Detection (WRED): Available ? Virtual Route Forwarding-Lite (VRF-Lite): Supported ? Rapid Per-VLAN Spanning Tree Plus (PVRST+): Enabled ### Compliance and Standards ? Standards Compliance: IEEE 802.3z, IEEE 802.1d, IEEE 802.1q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP) ### Power Specifications ? Power Type: Internal Power Supply (Not Installed) ? Hot-Plug Capability: Yes ? Maximum Supported Power Supplies: 2 ? Power Redundancy: Optional ? Power Requirements: AC 120/230V (50/60 Hz) ## Ports The Cisco N3K-C3048TP-1GE Layer 3 Switch comes equipped with an impressive 48 ports, making it a versatile and powerful networking solution for businesses of all sizes. These ports are the lifeline of any network infrastructure, allowing for the seamless transfer of data between devices. With the N3K-C3048TP-1GE, you can connect a wide range of devices such as computers, servers, printers, and IP phones, ensuring that your network runs smoothly and efficiently. ### Increased Connectivity The 48 ports on the Cisco N3K-C3048TP-1GE Layer 3 Switch provide you with an abundance of connectivity options. This means you can connect more devices directly to the switch without the need for additional networking equipment, reducing complexity and cost. Whether you have a small office or a large enterprise, having 48 ports at your disposal gives you the flexibility to scale your network as your business grows. ### High Bandwidth Each port on the N3K-C3048TP-1GE Layer 3 Switch supports Gigabit Ethernet, providing a high-speed connection for your devices. This is particularly important for businesses that rely heavily on data-intensive applications or frequently transfer large files. With Gigabit Ethernet, you can experience faster file transfers, smoother video conferencing, and improved overall network performance. #### Efficient Data Transfer Having 48 ports on the Cisco N3K-C3048TP-1GE Layer 3 Switch allows for efficient data transfer within your network. With more ports available, you can distribute the network load evenly across multiple devices, reducing congestion and minimizing latency. This ensures that each connected device receives optimal bandwidth, resulting in faster data transfer and improved productivity. #### Network Segmentation The abundance of ports on the N3K-C3048TP-1GE Layer 3 Switch allows for effective network segmentation. Network segmentation involves dividing a network into smaller, isolated segments to enhance security and performance. By connecting different devices or departments to separate ports, you can isolate their traffic, preventing unauthorized access and minimizing the impact of any network issues on the entire infrastructure. ##### Scalability The 48 ports on the Cisco N3K-C3048TP-1GE Layer 3 Switch provide a scalable solution for growing businesses. As your organization expands and more devices need to be connected to the network, you can easily add them to the available ports on the switch. This eliminates the need to invest in additional switches or complex network reconfigurations, saving both time and money. ##### Flexibility With 48 ports, the N3K-C3048TP-1GE Layer 3 Switch offers unmatched flexibility in designing your network topology. Whether you prefer a flat network architecture or a hierarchical structure, you have the freedom to connect devices based on your specific requirements. The flexibility provided by the multitude of ports ensures that your network can adapt and evolve as your business needs change. ##### Redundancy and High Availability The numerous ports on the Cisco N3K-C3048TP-1GE Layer 3 Switch allow for redundancy and high availability in your network. By connecting critical devices or servers to multiple ports, you can create redundant paths for data transfer. In case one port or connection fails, the switch automatically reroutes traffic through an alternate path, ensuring uninterrupted connectivity and minimizing downtime. In conclusion, the Cisco N3K-C3048TP-1GE Layer 3 Switch's 48 ports offer numerous benefits and importance for users. The increased connectivity, high bandwidth, efficient data transfer, network segmentation, scalability, flexibility, and redundancy make it an ideal choice for businesses seeking a robust networking solution. With 48 ports at your disposal, you can build a reliable and efficient network infrastructure that meets the demands of today's data-driven world.
  • Quick view

    N3K-C3548P-10G Cisco Nexus 48 Ports Layer 3 Managed Switch

    £237.05£284.46 Incl. VAT

    Cisco N3K-C3548P-10G Overview ### Manufacturer Information ? Brand: Cisco ? Model Number: N3K-C3548P-10G ? Product Category: Layer 3 Switch ### Connectivity and Ports ? Stacking Ports: Not Available ? Total Expansion Slots: 48 ? Expansion Slot Type: SFP+ ### Media and Performance Specifications ? Supported Media Type: Twisted Pair ? Ethernet Standards: 10 Gigabit Ethernet, Gigabit Ethernet ? Network Technologies: 10/100/1000Base-T, 10GBase-T ### Networking Capabilities ? Layer Supported: Layer 3 ? Manageable: Yes ### Power and Electrical Details ? Power Over Ethernet (PoE) Ports: None ? Input Voltage Options: 110 V AC, 220 V AC ### Environmental and Compliance Information ? Green Compliance: Yes ? Compliance Certificate: RoHS-5 ## Ports The Cisco N3K-C3548P-10G Layer 3 Managed Switch is equipped with a total of 48 ports, making it an ideal choice for businesses and organizations that require a high level of connectivity. These ports provide the necessary infrastructure for connecting various devices to the network, including computers, servers, printers, and other network devices. ### Increased Connectivity With 48 ports available, users have ample room to connect multiple devices to the switch. This is particularly beneficial for businesses that have a large number of employees or require a significant number of network connections. The increased connectivity allows for seamless communication and data transfer between devices, improving overall productivity and efficiency. #### Flexible Network Configuration The abundance of ports on the Cisco N3K-C3548P-10G Layer 3 Managed Switch provides users with flexibility in network configuration. They can easily allocate specific ports for different purposes, such as separating departments or implementing VLANs (Virtual Local Area Networks) to segment traffic. This flexibility enables efficient network management and ensures that resources are allocated appropriately. ##### Scalability As businesses grow and expand, their networking needs also evolve. The 48 ports on this managed switch allow for future scalability. It provides users with the ability to connect additional devices without the need for additional infrastructure investments. This scalability ensures that the switch can accommodate the increasing demands of the network as the business expands, saving both time and money in the long run. ## Features The Cisco N3K-C3548P-10G Layer 3 Managed Switch offers several key features that are essential for modern network infrastructures. ### Layer 3 Routing One of the standout features of this switch is its Layer 3 routing capability. Layer 3 routing allows for efficient routing of data packets between different networks. It enables the switch to make intelligent decisions on how to forward data based on factors such as IP addresses, ensuring optimal routing and reducing network congestion. Layer 3 routing improves network performance and enables advanced network configurations. #### Managed Switch Capabilities As a managed switch, the Cisco N3K-C3548P-10G provides advanced features and functionality that are not available in unmanaged switches. Users have granular control over their network, including the ability to configure VLANs, set up Quality of Service (QoS) policies, and implement security measures. With managed switch capabilities, users can optimize network performance, enhance security, and customize their network to meet specific requirements. ##### 10G Uplink Ports The presence of 10G uplink ports on this managed switch is another valuable feature. These ports support high-speed data transfer rates of up to 10 gigabits per second (Gbps), allowing for fast and efficient communication between switches or uplink connections to core networking equipment. The 10G uplink ports enable seamless integration with other high-bandwidth devices and ensure smooth data flow throughout the network. ## Name The name of this Cisco switch is Nexus 48 Ports Layer 3 Managed Switch. ### Brand Reliability Cisco is a renowned brand in the networking industry known for its reliability and quality. By choosing the Nexus 48 Ports Layer 3 Managed Switch, users can benefit from Cisco's expertise and trust in their products. The reliability of the brand ensures that users can count on the switch to perform consistently and meet their networking needs. #### Layer 3 Capability The inclusion of "Layer 3" in the name highlights the switch's advanced routing capabilities. Layer 3 switches are capable of making routing decisions based on IP addresses, allowing for efficient data transfer between different networks. This feature is crucial for organizations that require complex network configurations and require optimal routing performance. ##### Managed Switch Functionality The "Managed Switch" aspect of the name emphasizes the switch's advanced management capabilities. Managed switches offer greater control and customization options compared to unmanaged switches. Users can configure VLANs, implement security measures, and optimize network performance through the switch's management interface. The managed switch functionality ensures that users can tailor the network to their specific requirements and maintain a secure and efficient network infrastructure. In conclusion, the Cisco N3K-C3548P-10G Layer 3 Managed Switch stands out with its 48 ports, providing increased connectivity, flexibility in network configuration, and scalability. Its features, including Layer 3 routing, managed switch capabilities, and 10G uplink ports, offer significant benefits such as improved network performance, enhanced security, and seamless integration with high-bandwidth devices. Additionally, the name of the switch, Nexus 48 Ports Layer 3 Managed Switch, highlights the reliability of the Cisco brand, emphasizes its Layer 3 capability, and showcases its advanced managed switch functionality. Overall, this switch is an excellent choice for businesses and organizations looking for a robust and customizable networking solution.
  • Quick view

    WS-X6148-RJ-21 Cisco 48 Ports Ethernet Module

    £147.95£177.54 Incl. VAT

    ## Key Features ? Manufacturer: Cisco ? Part Number: WS-X6148-RJ-21 ? Product Title: 48-Port 10/100Base-TX Classic Interface Module ? Category: Switching Module ### Technical Specifications #### Primary Functionality ? This module is designed for network switching applications, facilitating efficient data transmission. #### Ports and Interfaces ? Total Ports: 48 x 10/100Base-TX LAN ? Connectors: 4 x RJ-21 ? Port Types: 48 x RJ-45 10/100Base-TX PoE LAN ### Media and Performance Metrics #### Supported Media ? Compatible with Category 5 or higher STP/UTP for 10/100Base-TX connectivity. #### Data Transfer Capabilities ? Ethernet Speed: 10 Mbps ? Fast Ethernet Speed: 100 Mbps ### Expansion Options ? Daughter Cards Supported: ? 1 x WS-F6K-VPWR= PoE ? 1 x WS-X6148-21AF-UG= PoE ### Management Features ? Management Tools: CiscoWorks ? Protocols: SNMP v1/2/3 ? RMON Support: RMON 1/2/3/9 ? MIB: Supported ? Quality of Service: IEEE 802.1p ? VLAN Support: IEEE 802.1q ## Ports The Cisco WS-X6148-RJ-21 Ethernet Module boasts an impressive 48 ports, making it an ideal choice for users who require a high-density networking solution. With its extensive port capacity, this module offers numerous benefits and plays a crucial role in meeting the connectivity needs of businesses, data centers, and network-intensive environments. ### Enhanced Connectivity This Ethernet module is designed to provide enhanced connectivity options, enabling users to connect a multitude of devices to their network infrastructure. With 48 ports at their disposal, users can effortlessly connect a wide range of devices, including computers, servers, IP phones, printers, and network switches. This versatility ensures that businesses can accommodate both current and future networking requirements without having to invest in additional hardware. ### Scalability Scalability is a fundamental aspect of any network infrastructure. The Cisco WS-X6148-RJ-21 Ethernet Module excels in this area by offering 48 ports, allowing businesses to easily scale their network as their needs evolve. Whether you are expanding your workforce or deploying new applications that require additional network connections, having ample port availability ensures that you can seamlessly integrate new devices into your network without experiencing bottlenecks or performance degradation. #### Flexibility The flexibility provided by the 48 ports on the Cisco WS-X6148-RJ-21 Ethernet Module empowers users to design their network architecture according to their specific requirements. By offering a vast number of ports, this module allows for the creation of complex network topologies, including hierarchical designs and redundant setups. Moreover, these ports support various Ethernet standards, such as 10/100BASE-TX and 10/100/1000BASE-T, providing compatibility with a wide array of devices and ensuring seamless integration into existing networks. #### Increased Bandwidth With 48 ports, this Ethernet module significantly increases the available bandwidth within a network. Each port can handle substantial traffic, allowing for efficient data transfer and minimizing network congestion. This is particularly important for businesses that rely on data-intensive applications or require high-speed connectivity for their critical operations. The increased bandwidth provided by the 48 ports ensures that network performance remains optimal, even during peak usage periods. ##### Cost Efficiency The Cisco WS-X6148-RJ-21 Ethernet Module's 48 ports offer a cost-efficient solution for businesses. Instead of purchasing multiple smaller modules or switches to accommodate their connectivity needs, organizations can rely on this single module to handle a large number of devices. This consolidation simplifies network management, reduces cabling complexity, and lowers overall infrastructure costs. Additionally, with its scalability and flexibility, this module enables businesses to future-proof their network investments, eliminating the need for costly hardware upgrades in the near term. ##### Improved Productivity and User Experience The ample port availability of the Cisco WS-X6148-RJ-21 Ethernet Module promotes improved productivity and user experience. With more ports at their disposal, employees can effortlessly connect their devices to the network without encountering connectivity issues or delays. This seamless connectivity enables employees to access the resources they need promptly, resulting in enhanced productivity and streamlined workflows. Moreover, users can enjoy a smooth and uninterrupted experience when using bandwidth-hungry applications or engaging in video conferencing, ultimately contributing to a more efficient and satisfying work environment. ##### Redundancy and High Availability Having 48 ports allows for the implementation of redundancy and high availability measures within a network infrastructure. Users can create redundant connections between devices or employ link aggregation techniques to ensure uninterrupted connectivity even in the event of a port or switch failure. This redundancy eliminates single points of failure and increases overall network reliability. Critical applications and services can continue to operate without disruptions, minimizing downtime and ensuring business continuity. In conclusion, the 48 ports offered by the Cisco WS-X6148-RJ-21 Ethernet Module deliver enhanced connectivity, scalability, flexibility, increased bandwidth, cost efficiency, improved productivity, and user experience. Furthermore, the ability to implement redundancy and high availability measures makes this module an invaluable asset for businesses seeking a reliable and future-proof networking solution. Whether you are expanding your network infrastructure or upgrading an existing one, the Cisco WS-X6148-RJ-21 Ethernet Module with its 48 ports is an excellent choice for meeting your networking needs.
  • Quick view

    DS-X9448-768K9 Cisco 48-Port 16-GBPS Fibre Channel Switch Module

    £233.86£280.63 Incl. VAT

    ## Product Overview ### Manufacturer Details ? Brand: Cisco ? Part Number: DS-X9448-768K9 ? Device Type: Managed Switch with 48 Ports ? Enclosure Type: Plug-in Module ### Technical Specifications #### Ports and Interfaces ? Port Count: 48 x 16Gb Fibre Channel SFP+ ? Serial Interface: 1 x RS-232 for Management #### Fibre Channel Support ? FC-DA, FC-FS, FC-GS-3, FC-GS-4, FC-MI, FC-PH, FC-PH-2 ? FC-PH-3, FC-PI, FC-PLDA, FC-SB-2, FC-SB-3, FC-SW ? FC-SW-2, FC-SW-3, FC-Tape, FC-VI, FC-SP, FCP-4 ? FC-BB-2, FCP, FCP-2, FC-PI-2, FC-BB-5, FC-BB-3 ? FC-FS-2, FC-GS-5, FC-SW-4, FCP-3, FC-L ### Management and Features #### Remote Management Protocols ? SNMP Version 3 ? SSH-2 ? Command Line Interface (CLI) #### Advanced Features ? Syslog Support ? Access Control List (ACL) Support ? Quality of Service (QoS) Capabilities ? Remote Switch Port Analyzer (RSPAN) ? Registered State Change Notification (RSCN) ## Ports The Cisco DS-X9448-768K9 Fibre Channel Switching Module comes equipped with an impressive 48 ports, making it an ideal choice for businesses and organizations that require a high level of connectivity. With this extensive number of ports, users can easily connect multiple devices and ensure seamless communication between them. ### Efficient Connectivity The 48 ports on the Cisco DS-X9448-768K9 Fibre Channel Switching Module allow for efficient connectivity within a network infrastructure. Whether you need to connect servers, storage devices, or other networking equipment, having an abundance of ports ensures that you have the flexibility to accommodate all your devices without any limitations. #### Scalability One of the major benefits of having 48 ports is the scalability it offers. As businesses grow and expand, their networking needs also increase. With a limited number of ports, organizations may face difficulties in accommodating new devices or expanding their network infrastructure. However, with the Cisco DS-X9448-768K9 Fibre Channel Switching Module's 48 ports, scalability is never an issue. It provides the necessary room for future growth and allows businesses to seamlessly integrate new devices into their network without any disruptions. #### Redundancy and High Availability Another advantage of having 48 ports is the ability to create redundant connections for high availability. Redundancy ensures that if one port fails or experiences issues, there are alternative paths available to maintain uninterrupted connectivity. This level of redundancy is crucial for businesses that rely heavily on their network infrastructure for critical operations. With 48 ports, users can set up redundant connections and ensure that their network remains operational even in the event of a port failure. #### Improved Performance The Cisco DS-X9448-768K9 Fibre Channel Switching Module's 48 ports also contribute to improved network performance. With a larger number of ports, the switch can handle higher data transfer rates and accommodate increased network traffic. This is particularly beneficial for businesses that deal with large amounts of data or require real-time communication between devices. The ample number of ports allows for smoother and faster data transmission, minimizing latency and enhancing overall network performance. ##### Flexibility Having 48 ports provides users with the flexibility to configure their network infrastructure according to their specific requirements. Whether you need to create separate VLANs, implement quality of service (QoS) policies, or establish dedicated connections between specific devices, the Cisco DS-X9448-768K9 Fibre Channel Switching Module's 48 ports offer the necessary flexibility to customize your network setup. ## Speed Another noteworthy feature of the Cisco DS-X9448-768K9 Fibre Channel Switching Module is its impressive speed capability of 16 Gbps. This high-speed connectivity is essential for organizations that demand fast and efficient data transfer rates. ### Enhanced Data Transfer The 16 Gbps speed of the Cisco DS-X9448-768K9 Fibre Channel Switching Module ensures enhanced data transfer rates, minimizing delays and bottlenecks in the network. This is especially crucial for businesses that rely on real-time data processing or need to transfer large files quickly. With such high-speed capabilities, users can experience seamless data transfer, improving productivity and reducing downtime. #### Bandwidth Intensive Applications The 16 Gbps speed is particularly valuable for bandwidth-intensive applications. Whether it's video streaming, data-intensive backups, or virtualization, these applications require substantial bandwidth to operate smoothly. The Cisco DS-X9448-768K9 Fibre Channel Switching Module's high-speed connectivity ensures that these applications receive the necessary bandwidth to function optimally, without any performance degradation. #### Future-Proofing Investing in a switch with 16 Gbps speed is also a future-proofing measure. As technology continues to advance, the demand for faster data transfer rates will only increase. By choosing a switch with high-speed capabilities like the Cisco DS-X9448-768K9 Fibre Channel Switching Module, businesses can ensure that their network infrastructure remains up to date-and capable of handling the data needs of the future. This eliminates the need for frequent upgrades or replacements, saving both time and resources. #### Compatibility The 16 Gbps speed of the Cisco DS-X9448-768K9 Fibre Channel Switching Module ensures compatibility with other devices and networking equipment that support similar high-speed connections. This compatibility allows organizations to seamlessly integrate the switch into their existing network infrastructure without any compatibility issues or bottlenecks. ##### Reduced Latency The high-speed connectivity of 16 Gbps significantly reduces latency, ensuring faster response times and improved overall network performance. Reduced latency is especially important for businesses that rely on time-sensitive applications or require real-time communication between devices. The Cisco DS-X9448-768K9 Fibre Channel Switching Module's speed capabilities contribute to a more efficient and responsive network, enabling organizations to operate at peak performance. In conclusion, the Cisco DS-X9448-768K9 Fibre Channel Switching Module's 48 ports and 16 Gbps speed offer substantial benefits for users. The extensive number of ports provides efficient connectivity, scalability, redundancy, and improved performance. On the other hand, the high-speed capabilities ensure enhanced data transfer rates, compatibility with bandwidth-intensive applications, future-proofing, and reduced latency. By incorporating this powerful switching module into their network infrastructure, organizations can achieve a robust and reliable connectivity solution that meets their evolving needs.
  • Quick view

    WS-C2960XR-48TS-I Cisco Catalyst 2960-XR 48 Ports Ethernet Switch

    £178.18£213.82 Incl. VAT

    ## Name: WS-C2960XR-48TS-I The Cisco Catalyst 2960-XR Gigabit Ethernet switch is a powerful networking solution that offers exceptional performance and reliability. One of its standout features is its name, the WS-C2960XR-48TS-I, which sets it apart from other switches in the market. In this section, we will explore the benefits and importance of this particular name for users. Overview of Cisco WS-C2960XR-48TS-I Ethernet Switch ### Manufacturer Information ? Brand: Cisco ? Part Number: WS-C2960XR-48TS-I ? Series: Catalyst 2960-XR ? Type: Ethernet Switch ### Port Configuration and Interfaces #### Total Network Ports ? 48 x Gigabit Ethernet Ports ? 4 x Gigabit Ethernet Expansion Slots #### Special Features ? Management Port: Yes ? USB Ports: Yes ? Token Ring Port: Absent ? LRE Port: Absent ? Bypass Feature: Not Available ? Modular Design: No ### Performance Specifications #### Media and Cable Standards ? Supported Media Type: Twisted Pair ? Twisted Pair Standard: Category 5 ? Ethernet Technology: Gigabit Ethernet ? Network Technology: 10/100/1000Base-T ### Expansion Capabilities #### Expansion Slots ? Total Expansion Slots: 4 ? Expansion Slot Type: SFP ? SFP Slots: 4 ### Networking and Communication ? Layer 3 Support: Yes ### Memory Specifications #### Standard Memory ? 512 MB DRAM ? 128 MB Flash Memory ### Power Management #### Power Features ? PoE (RJ-45) Port: Available ? Input Voltage: 110 V AC / 220 V AC ? Power Source: Standard Power Supply ? Redundant Power Supply: Included ### Product Identification The name WS-C2960XR-48TS-I serves as a unique identifier for this specific model of the Cisco Catalyst 2960-XR series. With a wide range of switches available in the market, having a distinct name helps users easily identify and differentiate this particular product from others. This is particularly useful for IT professionals who are responsible for managing multiple switches in their network infrastructure. ### Model-Specific Features The WS-C2960XR-48TS-I is equipped with a set of features that are specific to this model. These features are designed to enhance the overall performance and functionality of the switch. By highlighting the name of the switch, users can quickly identify if it possesses the specific features they require for their networking needs. #### Enhanced Security Security is a top concern for any network administrator, and the WS-C2960XR-48TS-I is designed with enhanced security features to address these concerns. It supports advanced security protocols such as Access Control Lists (ACLs), which allow administrators to control traffic flow and restrict unauthorized access to the network. With this level of security, businesses can ensure that their data remains protected from potential threats. #### High Scalability For growing businesses, scalability is an essential factor to consider when investing in networking equipment. The WS-C2960XR-48TS-I offers high scalability, allowing organizations to expand their network infrastructure as needed. With 48 ports available, businesses can connect a large number of devices and easily accommodate future growth without the need for additional switches. This scalability ensures that the network can handle increased traffic and supports uninterrupted business operations. #### Reliability and Redundancy Network downtime can be costly for businesses, leading to lost productivity and potential revenue loss. The WS-C2960XR-48TS-I is built with reliability in mind, featuring redundant power supplies that ensure continuous operation even in the event of a power failure. Additionally, it supports hot-swappable power supplies, enabling administrators to replace faulty units without interrupting network connectivity. This level of redundancy minimizes the risk of downtime and provides peace of mind to users. ##### Cost-Effective Solution Investing in networking equipment can be a significant expense for businesses. The WS-C2960XR-48TS-I offers a cost-effective solution by providing a wide range of features at an affordable price point. With its high-performance capabilities and extensive feature set, this switch offers excellent value for money, making it an ideal choice for organizations looking to maximize their IT budget. ## Ports: 48 Another noteworthy feature of the Cisco Catalyst 2960-XR Gigabit Ethernet switch is the number of ports it offers. With 48 ports available, this switch provides users with ample connectivity options for their network infrastructure. In this section, we will explore the benefits and importance of having 48 ports for users. ### Increased Device Connectivity The WS-C2960XR-48TS-I's 48 ports allow organizations to connect a large number of devices to their network infrastructure. This is particularly beneficial for businesses that have numerous computers, printers, servers, IP phones, and other network devices that require connectivity. By having sufficient ports available, users can ensure that all their devices can be connected without the need for additional switches or complicated network configurations. ### Flexibility and Versatility Having 48 ports provides users with the flexibility to design their network infrastructure according to their specific requirements. With a surplus of ports, users can easily accommodate changes in the network layout, add new devices, or reconfigure existing connections without the need for significant infrastructure changes. This level of flexibility ensures that the network can adapt to evolving business needs and facilitates seamless expansion as the organization grows. #### Improved Network Performance The availability of 48 ports on the WS-C2960XR-48TS-I allows for efficient distribution of network traffic. By evenly distributing the load across multiple ports, congestion and bottlenecks are minimized, resulting in improved network performance. Users can expect faster data transfer speeds and reduced latency, ensuring smooth and uninterrupted communication between devices. #### Enhanced Network Security Each port on the WS-C2960XR-48TS-I can be individually configured and secured, allowing for granular control over network access. This feature is particularly important in environments where different devices or departments require varying levels of access to the network. Administrators can set up VLANs (Virtual Local Area Networks) to isolate sensitive data from less secure segments of the network, enhancing overall network security. ##### Cost-Efficient Network Expansion With 48 ports available, businesses can expand their network infrastructure without requiring additional switches or costly upgrades. This scalability eliminates the need for unnecessary expenses and allows organizations to grow their network at a pace that aligns with their budget and requirements. The cost-efficient nature of this feature makes it an attractive choice for businesses looking to optimize their IT investments. ## Functionality: Ethernet Switch The Cisco Catalyst 2960-XR Gigabit Ethernet switch is primarily designed to function as an Ethernet switch. This functionality offers numerous benefits and plays a crucial role in network communication and performance. In this section, we will explore the importance and advantages of this feature. ### Efficient Data Transfer As an Ethernet switch, the WS-C2960XR-48TS-I excels in facilitating efficient data transfer within a network. It operates at gigabit speeds, allowing for high-speed communication between connected devices. With its advanced switching capabilities, the switch intelligently routes data packets to their intended destinations, optimizing network performance and minimizing latency. ### Network Segmentation The Ethernet switch functionality of the WS-C2960XR-48TS-I enables network segmentation using Virtual Local Area Networks (VLANs). VLANs allow administrators to logically separate the network into different segments, ensuring that traffic flows only between authorized devices. This segmentation improves network security, enhances performance, and simplifies network management. #### QoS (Quality of Service) Support The WS-C2960XR-48TS-I offers Quality of Service (QoS) support, a crucial feature for businesses that require prioritization of network traffic. QoS allows administrators to assign different levels of priority to specific types of data, ensuring that critical applications receive sufficient bandwidth and do not suffer from delays or interruptions. This feature is particularly beneficial for organizations that rely heavily on real-time applications such as video conferencing or VoIP services. #### Power Over Ethernet (PoE) Capability Power Over Ethernet (PoE) is an essential feature for organizations looking to power their network devices without the need for separate power cables or adapters. The WS-C2960XR-48TS-I supports PoE, allowing it to provide power to compatible devices such as IP phones, wireless access points, and IP cameras through the Ethernet cable. This eliminates the need for additional power sources and simplifies the installation and management of network devices. ##### Network Management and Monitoring The WS-C2960XR-48TS-I offers robust network management and monitoring capabilities. It supports various management protocols, including SNMP (Simple Network Management Protocol), which allows administrators to monitor and manage the switch remotely. This feature enables proactive monitoring of network performance, timely identification of potential issues, and quick resolution of problems, ensuring a reliable and optimized network infrastructure. In conclusion, the Cisco Catalyst 2960-XR Gigabit Ethernet switch's name, WS-C2960XR-48TS-I, serves as a unique identifier for this model and highlights its specific features. The 48 ports offer increased device connectivity, flexibility, improved network performance, and enhanced security. The Ethernet switch functionality provides efficient data transfer, network segmentation, QoS support, PoE capability, and robust network management and monitoring. These features collectively make the WS-C2960XR-48TS-I an ideal choice for businesses seeking a high-performance, reliable, and scalable networking solution.
  • Quick view

    N9K-C9396PX Cisco Managed Switch with 48 Ports

    £202.05£242.46 Incl. VAT

    ## Overview of the Cisco Nexus 9396PX ### Manufacturer Details ? Brand: Cisco ? Model Number: N9K-C9396PX ### Product Specifications ? Series: Nexus 9000 ? Model: Nexus 9396PX Layer 3 Switch ? Type: Layer 3 Switch #### Ports and Slots ? Token Ring Port: Absent ? LRE Port: Not Available ? Uplink Port: Present ? Bypass Port: Not Supported ? Management Port: Available ? USB Ports: Yes ? Expansion Slots: 48 x 10 Gigabit Ethernet #### Media and Performance ? Ethernet Technology: 10 Gigabit Ethernet ? Network Technology: 10GBase-X ##### I/O Expansion ? Total Expansion Slots: 49 ? Expansion Slot Type: SFP+ ? SFP+ Slots: 48 #### Networking and Communication ? Supported Layer: Layer 3 #### Management and Protocols ? Manageable: Yes ? Management Features: VLAN DHCP QoS Syslog SNMP (v1, v2, v3) MIB ? VLAN ? DHCP ? QoS ? Syslog ? SNMP (v1, v2, v3) ? MIB #### Power Specifications ? PoE (RJ-45) Port: Not Available ? Input Voltage: 110 V AC, 220 V AC ? Power Source: Power Supply ? Redundant Power Supply: Supported ## Ports The Cisco N9K-C9396PX Managed Switch is equipped with a remarkable 48 ports, making it an ideal choice for businesses and organizations with high networking demands. With such a large number of ports, this switch provides an extensive range of connectivity options, facilitating the seamless integration of various devices and allowing for efficient data transfer and communication within the network. ### Enhanced Connectivity The 48 ports on the Cisco N9K-C9396PX enable users to establish connections with a multitude of devices simultaneously. Whether it's connecting servers, computers, printers, or other networking equipment, this switch ensures that every device can be easily integrated into the network infrastructure. With this enhanced connectivity, businesses can effectively manage their expanding network requirements without compromising performance or efficiency. ### Improved Scalability Scalability is a crucial aspect of any growing organization. The Cisco N9K-C9396PX Managed Switch's 48 ports provide ample room for expansion and accommodate future network growth. As businesses evolve and add more devices to their network, having a switch with a large number of ports allows for seamless integration and prevents the need for additional hardware investments shortly. ### Flexible Network Design The abundance of ports on the Cisco N9K-C9396PX opens up possibilities for creating a flexible network design. With 48 ports at their disposal, network administrators can design and implement a network architecture that suits their specific requirements. Whether it's creating VLANs to segregate traffic or establishing redundant links for increased reliability, this switch offers the flexibility needed to build a customized network infrastructure. #### Improved Data Transfer Speed Having 48 ports on the Cisco N9K-C9396PX allows for efficient data transfer within the network. Each port supports high-speed data transmission, ensuring that information flows seamlessly between devices. This enhanced data transfer speed is particularly beneficial in scenarios where large files need to be transferred or when real-time communication and collaboration are critical. #### Reduced Network Congestion With 48 ports, the Cisco N9K-C9396PX helps distribute network traffic evenly across the network, reducing the chances of network congestion. By providing multiple ports for devices to connect to, this switch minimizes the risk of bottlenecks and ensures that data can flow smoothly without interruptions. The reduced network congestion leads to improved network performance and enhances user experience. #### Enhanced Network Reliability The Cisco N9K-C9396PX Managed Switch's 48 ports enable the establishment of redundant connections. Redundancy is crucial for maintaining network availability and ensuring uninterrupted operation. By creating redundant links between devices, network administrators can ensure that if one link fails, traffic can automatically be rerouted through an alternate path. This redundancy feature enhances network reliability, minimizes downtime, and safeguards critical business operations. ##### Cost-Efficiency Having 48 ports on a single switch eliminates the need for purchasing multiple switches to accommodate a larger number of devices. This results in cost savings for businesses as they can consolidate their networking infrastructure into a single device. Furthermore, using a single switch reduces power consumption and simplifies cable management, further contributing to cost efficiency. ##### Future-Proof Investment Investing in a switch with 48 ports like the Cisco N9K-C9396PX is a future-proof decision. As technology advances and businesses expand, the need for more devices and connectivity will only increase. By investing in a switch with ample ports, organizations can ensure that their networking infrastructure can support future growth without requiring costly hardware upgrades. In conclusion, the Cisco N9K-C9396PX Managed Switch's 48 ports offer numerous benefits and play a vital role in meeting the networking needs of businesses and organizations. With enhanced connectivity, improved scalability, flexible network design options, improved data transfer speeds, reduced network congestion, enhanced reliability, cost-efficiency, and future-proofing capabilities, this switch empowers users to build a robust and efficient network infrastructure.
  • Quick view

    SF220-48P-K9-NA Cisco Small Business Smart Plus 48 PoE Ethernet Ports Managed Switch

    £311.82£374.18 Incl. VAT

    ## Overview of Cisco SF220-48P-K9-NA The Cisco SF220-48P is a versatile 48-port PoE smart switch designed to enhance your network performance. ### Key Specifications ? Manufacturer: Cisco Systems, Inc. ? Part Number: SF220-48P-K9-NA ? Brand: Cisco ? Product Line: Smart Plus ? Model Series: 220 ### Physical Characteristics ? Product Type: Ethernet Switch ? Total Network Ports: 48 ? Uplink Ports: Yes (2 x Gigabit Ethernet) ? Modular Design: No ? USB Ports: No #### PoE Capabilities ? Number of PoE+ Ports: 48 (RJ-45) ? Stacking Ports: No ### Performance and Connectivity ? Media Type: Twisted Pair ? Cable Standard: Category 5 ? Ethernet Technologies Supported: Fast Ethernet (10/100Base-TX) Gigabit Ethernet (10/100/1000Base-T, 1000Base-X) ? Fast Ethernet (10/100Base-TX) ? Gigabit Ethernet (10/100/1000Base-T, 1000Base-X) #### Expansion Slots ? Total Expansion Slots: 2 ? Type: SFP ? Shared SFP Slots: Yes ### Network Management Features ? Layer Supported: Layer 2 ? Manageable: Yes ? Protocols Supported: SNMP (Versions 1, 2c, 3) CLI Telnet RMON MIB DHCP Remote Management Web-Based Management ? SNMP (Versions 1, 2c, 3) ? CLI ? Telnet ? RMON ? MIB ? DHCP ? Remote Management ? Web-Based Management ### Memory and Reliability ? Standard Memory: 128 MB ? Flash Memory: 32 MB ? MTBF: 210,753 hours ### Power Specifications ? Input Voltage: 120 V AC / 230 V AC ? Power Source: Power Supply ## Number Of Ports The Cisco SF220-48P-K9-NA Managed Switch is an exceptional networking device that offers a total of 48 ports. This feature is crucial for businesses and organizations that require a high number of connections to support their network infrastructure. ### Increased Connectivity With 48 ports, this managed switch enables users to connect numerous devices simultaneously. Whether it's computers, servers, printers, or other network-enabled devices, the Cisco SF220-48P-K9-NA provides ample connectivity options for seamless data transfer and communication. #### Scalability The abundance of ports offered by this switch allows for easy expansion and scalability. As businesses grow and add more devices to their network, having enough ports is essential to accommodate these new additions without the need for additional hardware investments. The Cisco SF220-48P-K9-NA provides the flexibility to support future growth and ensure optimal network performance. #### Streamlined Network Architecture Having 48 ports on a single switch eliminates the need for multiple switches or complex network configurations. With fewer devices to manage, IT administrators can simplify their network architecture, reduce cable clutter, and enhance overall network efficiency. This simplification leads to easier troubleshooting, improved performance, and cost savings. #### Efficient Data Transfer The high number of ports enables data to flow seamlessly between connected devices, minimizing bottlenecks and latency issues. This is particularly important in environments where large amounts of data need to be transferred quickly, such as multimedia production studios or data centers. The Cisco SF220-48P-K9-NA ensures smooth data transmission across the network, enhancing productivity and user experience. ##### Cost-Effective Solution By providing 48 ports in a single device, the Cisco SF220-48P-K9-NA Managed Switch eliminates the need for additional switches, saving businesses money on equipment costs. It also reduces power consumption and maintenance requirements associated with managing multiple devices, further contributing to cost savings in the long run. ##### Improved Network Performance The ample number of ports offered by this managed switch ensures that network traffic is distributed evenly, preventing congestion and bottlenecks. This leads to improved network performance, reduced data transfer times, and enhanced user productivity. Whether it's a small office or a large enterprise, the Cisco SF220-48P-K9-NA optimizes network performance to meet the demands of modern businesses. ## Power Over Ethernet The Cisco SF220-48P-K9-NA Managed Switch supports Power over Ethernet (PoE) technology, providing power and data connectivity to compatible devices through a single Ethernet cable. This feature is essential for organizations that rely on network-powered devices such as IP phones, wireless access points, and security cameras. ### Simplified Deployment With PoE support, there's no need for separate power outlets near each device. This simplifies the installation process and eliminates the need for additional power cables or adapters. IT teams can deploy network-connected devices quickly and efficiently, saving time and effort in setting up infrastructure. #### Flexibility and Mobility PoE technology allows for greater flexibility in device placement. Without being restricted by power outlet availability, devices can be installed in optimal locations to maximize network coverage without compromising convenience or aesthetics. This flexibility is particularly beneficial in environments where devices need to be regularly relocated, such as retail stores or conference rooms. #### Cost Savings By leveraging PoE technology, businesses can save on electrical wiring costs. Eliminating the need for separate power cables reduces installation expenses and simplifies cable management. Additionally, PoE switches like the Cisco SF220-48P-K9-NA can intelligently manage power consumption, leading to energy efficiency and lower electricity bills. #### Centralized Power Management With PoE, power management becomes centralized, allowing for greater control and monitoring capabilities. IT administrators can remotely power cycle devices, allocate power resources, and receive alerts in case of power failures or irregularities. This centralized approach enhances network reliability, simplifies troubleshooting, and improves overall system management. ##### Scalability and Future-Proofing PoE technology is designed to support future technological advancements. By investing in a PoE-enabled switch like the Cisco SF220-48P-K9-NA, businesses can ensure compatibility with upcoming devices that rely on PoE for power. This future-proofing approach saves organizations from potential hardware upgrades or replacements down the line. ## Management Type The Cisco SF220-48P-K9-NA Managed Switch belongs to the Smart Plus management type category. This management type provides businesses with a balance between simplicity and advanced features, making it an ideal choice for small to medium-sized enterprises. ### Intuitive Web-Based Interface Smart Plus switches offer a user-friendly web-based interface that simplifies network configuration and management. IT administrators can easily navigate settings and perform tasks without requiring extensive networking knowledge or expertise. This intuitive interface streamlines network management processes, saving time and reducing the learning curve. #### Enhanced Security Features Smart Plus switches come equipped with advanced security features to protect the network from unauthorized access and potential threats. These switches support features such as VLANs (Virtual Local Area Networks) for network segmentation, MAC address filtering, and Access Control Lists (ACLs) for granular control over network traffic. The Cisco SF220-48P-K9-NA ensures that sensitive data remains secure and that only authorized devices have access to critical resources. #### Quality of Service (QoS) Prioritization Smart Plus switches prioritize network traffic based on pre-defined rules, ensuring that critical applications and services receive the necessary bandwidth and resources. This QoS functionality guarantees a consistent and reliable user experience for applications such as voice and video conferencing while optimizing network performance for other data-intensive tasks. The Cisco SF220-48P-K9-NA enables businesses to prioritize their network traffic effectively. #### Network Monitoring and Troubleshooting Smart Plus switches offer built-in monitoring and troubleshooting capabilities, providing IT teams with real-time insights into network performance and device health. These switches support features like port mirroring, which allows administrators to capture and analyze network traffic for diagnostics or security purposes. With the Cisco SF220-48P-K9-NA, businesses can proactively monitor their network, identify bottlenecks, and address issues promptly. ##### Cost-Effective Network Management Smart Plus switches provide advanced management features at an affordable price point. For small businesses with limited resources, these switches offer a cost-effective solution for network management without compromising on essential functionalities. The Cisco SF220-48P-K9-NA ensures that small businesses can benefit from enterprise-grade features without breaking the bank. ##### Future Expansion Potential Smart Plus switches are designed to accommodate future growth and technology advancements. These switches often support firmware updates that introduce new features and capabilities, allowing businesses to keep up with evolving networking requirements. The Cisco SF220-48P-K9-NA provides scalability and ensures that organizations can adapt their networks as their needs change over time. ## Product Line The Cisco SF220-48P-K9-NA Managed Switch belongs to the Small Business product line, catering specifically to the networking needs of small businesses and organizations. ### Simplified Network Management The Small Business product line focuses on delivering networking solutions that are easy to deploy and manage, even for businesses with limited IT resources. The Cisco SF220-48P-K9-NA provides a user-friendly interface and intuitive features that simplify network management tasks, allowing small businesses to focus on their core operations. #### Cost-Effective Solution Small businesses often have budget constraints, and the Small Business product line addresses this by offering cost-effective networking solutions. The Cisco SF220-48P-K9-NA Managed Switch provides enterprise-grade features at an affordable price point, making it an ideal choice for small businesses looking to optimize their network infrastructure without overspending. #### Reliable Performance The Small Business product line emphasizes reliability and performance. The Cisco SF220-48P-K9-NA is built with high-quality components and undergoes rigorous testing to ensure its durability and long-term performance. Small businesses can rely on this switch to provide a stable network connection, supporting their day-to-day operations without interruptions. #### Growth and Scalability Small businesses often have growth aspirations, and the Small Business product line accommodates these needs. With the Cisco SF220-48P-K9-NA, businesses can easily expand their network infrastructure as they grow, thanks to its scalability and support for future technological advancements. This switch allows small businesses to adapt their networks without experiencing any major disruptions or costly upgrades. ##### Customized Solutions The Small Business product line understands that each small business has unique networking requirements. With a range of models and configurations available, including the Cisco SF220-48P-K9-NA Managed Switch, businesses can choose the solution that best fits their needs. This level of customization ensures that small businesses can build a network infrastructure tailored to their specific requirements. ##### Expert Support Cisco's Small Business product line is backed by a team of experts who provide technical support and guidance. Small businesses can rely on Cisco's expertise to help them navigate any networking challenges or issues they may encounter. The Cisco SF220-48P-K9-NA Managed Switch comes with access to Cisco's support resources, ensuring that small businesses receive assistance when needed. In conclusion, the Cisco SF220-48P-K9-NA Managed Switch offers an impressive number of ports, Power over Ethernet capabilities, and Smart Plus management features, and belongs to the Small Business product line. These features provide businesses with increased connectivity, simplified deployment, scalability, enhanced security, improved network performance, cost savings, and expert support. Whether it's a small business or a medium-sized enterprise, the Cisco SF220-48P-K9-NA is a versatile networking solution that meets the diverse needs of modern organizations.
  • Quick view

    WS-X6548V-GE-TX Cisco Catalyst 48 Port Switching Module

    £210.00£252.00 Incl. VAT

    ## Overview of the Cisco WS-X6548V-GE-TX Switching Module The Cisco WS-X6548V-GE-TX is an advanced Catalyst Switching Module designed for robust networking solutions. ### Product Details ? Manufacturer: Cisco ? Part Number: WS-X6548V-GE-TX ? Product Type: 48 Port Switching Module ### Technical Specifications #### Functionality ? This module serves as a crucial component for efficient network switching, facilitating seamless connectivity. #### Usage ? Ideal for various network applications, it is optimized for high-performance switching environments. ### Interface and Port Configuration #### Port Overview ? Total Ports: 48 ? Port Type: 10/100/1000Base-T LAN ? Port Details: 48 x RJ-45 10/100/1000Base-T with Auto-sensing capabilities ### Connectivity Options #### Supported Media Types ? Category 3 UTP (10/100/1000Base-T) ? Category 5 UTP (10/100/1000Base-T) ? Category 5e UTP (10/100/1000Base-T) ? Category 6 UTP (10/100/1000Base-T) ### Performance Metrics #### Data Transfer Capabilities ? Speed: 100 Mbps (Half/Full-duplex) ? Gigabit Ethernet: 1 Gbps (Full-duplex) ? Voice Support: Accommodates one voice daughter card ## Ports The Cisco WS-X6548V-GE-TX Switching Module is a high-performance module that offers an impressive 48 ports. This feature alone makes it an excellent choice for users who require a large number of ports for their networking needs. In this section, we will explore the benefits and importance of having 48 ports on this switching module. ### Flexibility and Scalability With 48 ports, this switching module provides users with the flexibility and scalability to connect multiple devices to their network. Whether it's computers, servers, printers, or other networking devices, the ample number of ports ensures that you can easily accommodate all your devices without any limitations or compromises. The ability to connect a large number of devices is particularly crucial for businesses that require extensive network infrastructure. Whether you are setting up a small office network or a large enterprise network, having 48 ports allows you to expand and grow your network without worrying about running out of connectivity options. ### Increased Bandwidth Each port on the Cisco WS-X6548V-GE-TX Switching Module supports Gigabit Ethernet technology. With 48 Gigabit Ethernet ports, users can take advantage of increased bandwidth for high-speed data transfers and seamless network performance. This enhanced bandwidth is especially beneficial for businesses that deal with large amounts of data regularly. Whether you are transferring large files, streaming high-definition videos, or running bandwidth-intensive applications, having 48 Gigabit Ethernet ports ensures that your network can handle the increased data traffic without any bottlenecks. ### Improved Network Performance Having 48 ports on this switching module significantly improves network performance by reducing congestion and minimizing network downtime. With more ports available, each device can have its dedicated connection, eliminating the need for devices to share bandwidth and reducing the chances of network congestion. Additionally, the Cisco WS-X6548V-GE-TX Switching Module supports advanced features such as Quality of Service (QoS), which allows you to prioritize traffic based on your requirements. This ensures that critical applications receive the necessary bandwidth and resources, resulting in improved network performance and a better user experience. #### Enhanced Network Security The Cisco WS-X6548V-GE-TX Switching Module offers advanced security features to protect your network and connected devices. With 48 ports, you can implement security measures such as port security, access control lists, and VLANs (Virtual Local Area Networks) to safeguard your network from unauthorized access and potential threats. By using features like VLANs, you can group devices into separate virtual networks, ensuring that sensitive data remains isolated and secure. Furthermore, with port security, you can limit the number of devices that can connect to each port, preventing unauthorized devices from gaining access to your network. #### Improved Network Management Managing a network with 48 ports can be challenging without proper tools and features. Fortunately, the Cisco WS-X6548V-GE-TX Switching Module offers comprehensive management capabilities that simplify network administration. With the support for protocols like Simple Network Management Protocol (SNMP) and Remote Monitoring (RMON), you can monitor and manage your network efficiently. These protocols provide valuable insights into network performance, allowing you to proactively identify and resolve issues before they impact your network's productivity. ##### Cost-Effective Solution Investing in a switching module with 48 ports like the Cisco WS-X6548V-GE-TX can be a cost-effective solution for businesses. Instead of purchasing multiple smaller switches or modules to accommodate a large number of devices, having 48 ports in a single module eliminates the need for additional hardware. Not only does this save on upfront costs, but it also reduces ongoing maintenance and management expenses. With a single switching module, you can simplify your network infrastructure, making it easier to manage and troubleshoot any issues that may arise. In conclusion, the Cisco WS-X6548V-GE-TX Switching Module's 48 ports offer users unparalleled flexibility, scalability, and performance. With increased bandwidth, improved network management, enhanced security, and cost-effective benefits, this switching module is a reliable choice for businesses of all sizes. Whether you need to connect numerous devices or require a high-performance network, the Cisco WS-X6548V-GE-TX Switching Module with its 48 ports is an ideal solution.
  • Quick view

    WS-C3650-48FD-L Cisco Catalyst 3650 Managed Switch, 48 Ports

    £305.45£366.54 Incl. VAT

    ## Ports The Cisco WS-C3650-48FD-L Managed Switch is equipped with 48 Ethernet ports, allowing for a seamless and efficient network connection. These ports offer a wide range of benefits and play a crucial role in ensuring smooth communication and data transfer within a network. ## Key Specifications of Cisco WS-C3650-48FD-L Ethernet Switch ### Model Overview ? Manufacturer: Cisco ? Model: WS-C3650-48FD-L ? Product Line: Catalyst ? Series: 3650 ? Type: Ethernet Switch ## 48-Port Switch Interface & Connectivity ### Network Ports Overview ? Total Ports: 48 ? Supports Stack Port ? Power over Ethernet Plus (PoE+): 48 Ports (RJ-45), each delivering up to 30W #### Detailed Port Configuration ? 48 x Gigabit Ethernet Network Ports ? 2 x 10 Gigabit Ethernet Uplink Ports ## Performance and Speed Capabilities ### Switching and Forwarding Rates ? Switching Capacity: 176 Gbps ? Forwarding Rate: 130.95 Mpps #### Routing & VLAN Support ? IPv4 Route Capacity: 24,000 ? Supports 255 VLANs ? Switched Virtual Interfaces (SVIs): Up to 1,000 #### Additional Performance Features ? MAC Address Table Size: 32,000 Entries ? Jumbo Frame Support: Up to 9,198 Bytes ? Routing Protocol: Static IP Routing ## Remote Management & Monitoring Protocols ? SNMP (v1, v2c, v3) ? RMON (1, 2, 3, 9) ? Telnet, SSH, CLI ## Expansion and Connectivity Features ### Interface Options ? 48 x 1000Base-T RJ-45 PoE+ Ports (30W Each) ? 2 x 1000Base-X SFP Uplink Ports ? 2 x 10GBase-X SFP+ Uplink Ports #### Expansion Slots ? 1 x Stacking Module Slot (Available) ## Power Specifications ### Power Supply and Redundancy ? Internal Hot-Plug Power Supply ? Power Supply Installed: 1 (Supports up to 2) ? Optional Power Redundancy (1+1 Scheme) #### Power Capacity ? Total Power Provided: 1,025 Watts ? Voltage: AC 120/230V, 50/60Hz ## Mounting and Environmental Compliance ### Rack Mounting Features ? Rack Mount Kit Included #### Compliance Standards ? CISPR 22 Class A, CISPR 24, EN 55022 Class A ? RoHS, UL 60950-1, FCC Part 15 Class A ? Other Certifications: GOST, BSMI CNS 13438, NOM, KCC ## Environmental Conditions ### Operating and Storage Conditions ? Operating Temperature: 23?F to 113?F (-5?C to 45?C) ? Operating Humidity: 5% to 96% (Non-Condensing) ? Storage Temperature: -40?F to 158?F (-40?C to 70?C) #### Mean Time Between Failures (MTBF) ? MTBF: 383,760 Hours ### Increased Connectivity With 48 ports, this managed switch offers extensive connectivity options, making it ideal for businesses of all sizes. It provides ample room for connecting multiple devices such as computers, servers, printers, IP phones, and other networking equipment. This high level of connectivity eliminates the need for additional switches or hubs, simplifying the network infrastructure. ### Flexibility and Scalability The numerous ports on the Cisco WS-C3650-48FD-L Managed Switch allow for easy expansion and scalability of the network. As your business grows and demands increase, you can effortlessly connect more devices without compromising on performance. This flexibility ensures that your network can adapt to changing needs and accommodate future advancements in technology. ### Gigabit Ethernet Capability All 48 ports on this managed switch support Gigabit Ethernet, enabling high-speed data transfer rates of up to 1000 Mbps. This feature is particularly beneficial for businesses that rely on bandwidth-intensive applications or frequently transfer large files. The increased speed enhances productivity by reducing network congestion and minimizing data transfer times. #### Improved Performance and Reliability The Cisco WS-C3650-48FD-L Managed Switch's 48 ports contribute to improved network performance and reliability. By providing dedicated connections for each device, it eliminates the risk of bottlenecks and ensures consistent data flow throughout the network. This reliability is especially critical in environments where uninterrupted connectivity is vital, such as data centers, offices, or educational institutions. #### Enhanced Network Security Each port on this managed switch can be configured with specific security settings, enabling network administrators to implement granular access controls. With 48 ports at their disposal, administrators can allocate resources effectively, restricting unauthorized access and preventing potential security breaches. This feature helps safeguard sensitive data and ensures that only authorized devices can connect to the network. #### Network Segmentation The Cisco WS-C3650-48FD-L Managed Switch's 48 ports allow for efficient network segmentation. Network segmentation involves dividing a network into smaller, isolated segments to enhance security and optimize network performance. With multiple ports available, administrators can assign different devices or departments to separate segments, minimizing the impact of any network issues and providing greater control over network traffic. ##### Ease of Management Managing a network with 48 ports can be a complex task without the right tools. However, the Cisco WS-C3650-48FD-L Managed Switch offers advanced management features that simplify the process. It provides a user-friendly web interface that allows administrators to monitor and configure each port individually, facilitating efficient troubleshooting, and ensuring optimal performance. ##### Cost-Effective Solution The Cisco WS-C3650-48FD-L Managed Switch's extensive port capacity offers a cost-effective solution for businesses. By providing 48 ports in a single device, it eliminates the need for additional switches or equipment, reducing overall infrastructure costs. Additionally, the switch's scalability allows businesses to expand their network without significant investments in additional hardware. In conclusion, the Cisco WS-C3650-48FD-L Managed Switch's 48 ports offer numerous benefits for users. From increased connectivity and flexibility to improved performance and enhanced security, these ports are essential for creating a robust and efficient network infrastructure. With its Gigabit Ethernet capability, ease of management, and cost-effectiveness, this managed switch is an excellent choice for businesses looking to build a reliable and scalable network.