## Product Details ### HPE R0M68A#ABA Aruba 2930M 24 Smart Rate PoE+ Switch #### Key Specifications ? Manufacturer: HPE ? Model Number: R0M68A#ABA ? Device Category: Managed Switch with 24 Ports, Layer 3, Stackable ? Form Factor: Rack-mountable, 1U ? Port Type: 5 Gigabit Ethernet #### Connectivity Features ? Ports: 24 x 1/2.5/5GBASE-T PoE+ ? Power Over Ethernet (PoE): Yes, PoE+ ? Power Budget: 860 Watts #### Performance Metrics ? Latency: 1 Gbps: 3.1 ?s 2.5 Gbps: 6.5 ?s 5 Gbps: 4.2 ?s 10 Gbps: 3.4 ?s ? 1 Gbps: 3.1 ?s ? 2.5 Gbps: 6.5 ?s ? 5 Gbps: 4.2 ?s ? 10 Gbps: 3.4 ?s ? Throughput: 112 Mpps ? Stacking Bandwidth: 100 Gbps ? Switching Capacity: 320 Gbps #### Routing and Protocols ? IPv4 Routing Table Capacity: 2000 entries ? IPv6 Routing Table Capacity: 1000 entries ? Supported Routing Protocols: OSPF, RIP, IGMPv2, Static IP Routing, ECMP ? OSPF, RIP, IGMPv2, Static IP Routing, ECMP #### Management Capabilities ? Remote Management Protocols: SNMP (v1, v2, v2c, v3), Telnet, SSH (v1, v2) ? SNMP (v1, v2, v2c, v3), Telnet, SSH (v1, v2) ? Encryption Protocols: MD5, SSL, TLS ? Authentication Methods: RADIUS, TACACS, EAP #### Advanced Features ? Flow Control and Full Duplex Capability ? DHCP and BootP Support ? VLAN and IGMP Snooping Support ? Quality of Service (QoS) features ? Dynamic ARP Protection and DHCP Protection #### Compliance Standards ? Complies with IEEE 802.1d, 802.1q, 802.3ab, 802.3af, and more #### Hardware Specifications ? Processor: ARM Cortex-A9, 1.016 GHz ? RAM: 1 GB DDR3 SDRAM ? Flash Memory: 4 GB #### Expansion and Connectivity Options ? Interfaces: 24 x 1/2.5/5GBASE-T PoE+ 1 x Serial Console 1 x USB Type B 1 x 1000BASE-T Management ? 24 x 1/2.5/5GBASE-T PoE+ ? 1 x Serial Console ? 1 x USB Type B ? 1 x 1000BASE-T Management ? Expansion Slots: 1 x Stacking Module Slot (available) 1 x Expansion Slot (available) ? 1 x Stacking Module Slot (available) ? 1 x Expansion Slot (available) #### Power Specifications ? Power Source: Internal Power Supply (not included) ? Maximum Units Supported: 2 ? Voltage Requirement: AC 120/230 V (50/60 Hz) ## Latency The HPE Aruba 2930M 40G 8SR Managed Switch is equipped with an impressive latency feature, boasting a speed of 1 Gbps. This latency feature plays a crucial role in enhancing network performance and ensuring a seamless user experience. Let's delve into the benefits and importance of this feature in greater detail. ### Enhanced Network Efficiency Low latency is essential for businesses that heavily rely on real-time applications and services. With a latency of 1 Gbps, the HPE Aruba 2930M 40G 8SR Managed Switch ensures minimal delays in transmitting data packets across the network. This improved efficiency allows for faster response times, enabling businesses to handle critical tasks and deliver services without any lag. ### Smooth Video Streaming In today's digital landscape, video streaming has become an integral part of many businesses. Whether it's video conferencing, live streaming events, or multimedia presentations, a high-speed network with low latency is essential for ensuring smooth and uninterrupted video playback. The HPE Aruba 2930M 40G 8SR Managed Switch excels in this aspect, allowing users to enjoy high-quality video streaming without buffering or pixelation issues. ### Optimized Gaming Experience For gaming enthusiasts or businesses hosting gaming events, having a low-latency network is crucial. High latency can lead to lag, disrupting the gaming experience and causing frustration among players. The 1 Gbps latency of the HPE Aruba 2930M 40G 8SR Managed Switch ensures minimal delays in transmitting game data, resulting in a seamless and immersive gaming experience for both casual and professional gamers. #### Reduced Network Congestion In high-traffic networks where multiple devices are connected simultaneously, network congestion can become a significant issue. The low latency of 1 Gbps offered by the HPE Aruba 2930M 40G 8SR Managed Switch helps alleviate network congestion by swiftly processing and forwarding data packets. This leads to improved network performance and prevents bottlenecks, ensuring a smooth flow of data across the network. #### Improved VoIP Quality Voice over Internet Protocol (VoIP) has revolutionized communication in businesses, allowing for cost-effective and efficient voice calls over the internet. However, poor network latency can result in dropped calls, distorted audio, and overall poor call quality. By leveraging the 1 Gbps latency of the HPE Aruba 2930M 40G 8SR Managed Switch, businesses can enjoy crystal-clear voice calls without any disruptions or delays. ##### Real-Time Data Processing Certain industries, such as finance or healthcare, rely heavily on real-time data processing. In these sectors, even a slight delay in transmitting critical information can have severe consequences. The low latency feature of the HPE Aruba 2930M 40G 8SR Managed Switch ensures that real-time data is processed and transmitted promptly, enabling businesses to make informed decisions without any time lags. ##### Competitive Advantage In today's fast-paced business environment, every second counts. The ability to respond quickly to customer inquiries, access critical information, and deliver services promptly can give businesses a significant competitive advantage. With the HPE Aruba 2930M 40G 8SR Managed Switch's low latency feature, organizations can improve their overall operational efficiency and stay ahead of their competitors. ## POE Class The HPE Aruba 2930M 40G 8SR Managed Switch is equipped with a POE (Power over Ethernet) Class feature, specifically rated at 6. This feature offers numerous benefits and holds significant importance for users in various industries. Let's explore the advantages of this feature in more detail. ### Efficient Power Delivery POE technology allows for the simultaneous transmission of power and data over a single Ethernet cable, eliminating the need for additional power cords and adapters. With a POE Class rating of 6, the HPE Aruba 2930M 40G 8SR Managed Switch can efficiently deliver power to connected devices such as IP phones, wireless access points, and security cameras. This streamlined power delivery simplifies installation and reduces cable clutter, resulting in cost savings and improved aesthetics. ### Flexibility in Device Placement Traditional power sources often limit the placement of devices due to proximity to electrical outlets. With POE technology, powered devices can be installed in locations where power outlets are not readily available. The HPE Aruba 2930M 40G 8SR Managed Switch's POE Class 6 rating ensures compatibility with a wide range of POE-enabled devices, providing users with the flexibility to deploy devices precisely where they are needed most, without being restricted by power availability. ### Centralized Power Management Managing power for numerous devices scattered across a network can be a daunting task. However, with the HPE Aruba 2930M 40G 8SR Managed Switch's POE Class feature, power management becomes significantly more streamlined. Administrators can centrally control and monitor the power usage of connected devices, allowing for efficient energy management and reducing overall power consumption. #### Improved Network Reliability In mission-critical environments, such as healthcare or manufacturing industries, maintaining uninterrupted network connectivity is essential. Power outages or disruptions can lead to significant downtime and potential loss of critical data. By utilizing the HPE Aruba 2930M 40G 8SR Managed Switch's POE Class 6 feature, businesses can ensure that vital network devices, such as access points or surveillance cameras, remain operational during power failures by connecting them to an uninterruptible power supply (UPS). #### Cost Savings Implementing POE technology eliminates the need for separate power supplies, reducing the overall cost of installation and maintenance. With the HPE Aruba 2930M 40G 8SR Managed Switch's POE Class 6 feature, businesses can avoid additional expenses associated with purchasing and deploying standalone power adapters or electrical wiring. This cost-effective solution not only simplifies installation but also offers long-term savings in energy consumption. ##### Scalability and Future-Proofing As businesses grow and expand their network infrastructure, scalability becomes a crucial consideration. The HPE Aruba 2930M 40G 8SR Managed Switch's POE Class 6 feature ensures compatibility with a wide range of existing and future POE-enabled devices. This future-proofing capability allows businesses to scale their network without worrying about power compatibility issues or the need for extensive infrastructure upgrades. ##### Eco-Friendly Solution Reducing energy consumption and promoting sustainability are top priorities for many organizations today. By implementing the HPE Aruba 2930M 40G 8SR Managed Switch's POE Class 6 feature, businesses can actively contribute to a greener environment. The centralized power management capabilities enable efficient energy usage, minimizing wastage and reducing the organization's carbon footprint. ## Ports With a notable emphasis on connectivity, the HPE Aruba 2930M 40G 8SR Managed Switch offers users an impressive total of 24 ports. This generous port count provides numerous benefits and holds significant importance for users across various industries. Let's delve into the advantages of this feature in greater detail. ### Scalability and Expansion The 24 ports offered by the HPE Aruba 2930M 40G 8SR Managed Switch provide users with ample room for scalability and expansion. Businesses can effortlessly connect multiple devices, such as computers, servers, printers, and additional switches, to create a robust and interconnected network infrastructure. This scalability allows organizations to accommodate their growing needs without the limitations imposed by a limited number of ports. ### Streamlined Network Management Managing a network with numerous devices can be a complex and time-consuming task. The HPE Aruba 2930M 40G 8SR Managed Switch's 24 ports simplify network management by providing a centralized hub for connecting all devices. Administrators can easily monitor and configure each device from a single interface, saving time and effort in managing network resources. ### Improved Network Performance Efficient network performance is critical for businesses to ensure smooth operations and seamless data transfer. By offering 24 ports, the HPE Aruba 2930M 40G 8SR Managed Switch allows for increased bandwidth availability, reducing the chances of network congestion. This improved network performance leads to faster data transfer speeds, enhanced productivity, and a better user experience for both employees and clients. #### Enhanced Connectivity Options The abundance of ports offered by the HPE Aruba 2930M 40G 8SR Managed Switch enables businesses to connect various devices simultaneously. This versatility allows organizations to cater to diverse connectivity requirements, including wired connections for devices that do not support wireless connectivity. With the flexibility to accommodate a wide range of devices, businesses can create a comprehensive network infrastructure that meets their specific needs. #### Redundancy and Failover Protection In mission-critical environments where network downtime is unacceptable, redundancy and failover protection are paramount. The HPE Aruba 2930M 40G 8SR Managed Switch's 24 ports provide businesses with the ability to implement redundant connections, ensuring uninterrupted network connectivity even if one port or device fails. This redundancy feature enhances network reliability, minimizing disruptions and potential loss of productivity. ##### Network Segmentation Segmenting a network into smaller, isolated subnetworks can improve security and optimize network performance. The HPE Aruba 2930M 40G 8SR Managed Switch's 24 ports enable businesses to create multiple subnetworks based on departments, teams, or specific functions. This segmentation allows for better control over network traffic and enhances security by isolating sensitive data or critical systems from other parts of the network. ##### Future-Proofing Investing in networking infrastructure requires a forward-thinking approach to ensure long-term compatibility and support for future technologies. The HPE Aruba 2930M 40G 8SR Managed Switch's generous offering of 24 ports provides businesses with the flexibility to accommodate future growth and evolving connectivity needs. This future-proofing capability helps organizations avoid costly infrastructure upgrades and ensures that their network can adapt to emerging technologies seamlessly. ## Slot The HPE Aruba 2930M 40G 8SR Managed Switch boasts a 1-Slot design, offering users a compact yet versatile solution for their networking needs. Let's explore the benefits and importance of this feature in further detail. ### Space-Saving Design The 1-Slot design of the HPE Aruba 2930M 40G 8SR Managed Switch allows for efficient space utilization. With limited rack space in server rooms or network closets, it is crucial to maximize the available area without compromising functionality. The compact form factor of the 1-Slot design ensures that businesses can optimize their space while enjoying the full capabilities of a managed switch. ### Easy Installation and Maintenance The simplified design of the 1-Slot HPE Aruba 2930M 40G 8SR Managed Switch facilitates easy installation and maintenance. With fewer components and a streamlined design, businesses can quickly deploy the switch without the need for extensive wiring or complex configurations. Additionally, the straightforward design simplifies routine maintenance tasks, minimizing downtime and ensuring uninterrupted network connectivity. ### Versatility in Deployment The 1-Slot design offers versatility in deployment options, allowing businesses to adapt to various networking environments. Whether it's mounting the switch on a rack or placing it on a desktop, the HPE Aruba 2930M 40G 8SR Managed Switch's compact form factor enables flexible placement based on specific requirements. This adaptability ensures that businesses can seamlessly integrate the switch into their existing infrastructure without any limitations. #### Cost-Effective Solution Minimizing costs is a priority for businesses of all sizes. The 1-Slot design of the HPE Aruba 2930M 40G 8SR Managed Switch provides a cost-effective solution by eliminating unnecessary components and focusing on essential functionality. This streamlined approach helps businesses save on upfront costs while still enjoying the benefits of a managed switch with advanced features and capabilities. #### Reduced Power Consumption Efficient power consumption is not only environmentally friendly but also contributes to cost savings in the long run. The HPE Aruba 2930M 40G 8SR Managed Switch's 1-Slot design ensures optimized power usage, reducing energy wastage and lowering electricity bills. By eliminating unnecessary components, this compact switch minimizes power requirements while maintaining excellent performance and reliability. ##### Scalability and Future-Proofing The 1-Slot design of the HPE Aruba 2930M 40G 8SR Managed Switch allows for scalability and future-proofing. As businesses grow and expand their network infrastructure, the need for additional switches may arise. The compact form factor of the 1-Slot design ensures easy integration of multiple switches within limited rack space, accommodating future expansion without the need for significant infrastructure changes. ##### Reliable Performance Despite its compact size, the HPE Aruba 2930M 40G 8SR Managed Switch's 1-Slot design does not compromise on performance. This switch delivers robust and reliable performance, meeting the demands of modern networking requirements. With high-speed data transfer capabilities and advanced features, businesses can rely on this compact switch to handle their network traffic efficiently and ensure uninterrupted connectivity. ## Rack Mountable The HPE Aruba 2930M 40G 8SR Managed Switch is rack mountable, offering users a convenient and efficient solution for organizing their network infrastructure. Let's explore the benefits and importance of this feature in greater detail. ### Optimized Space Utilization Rack mounting allows businesses to efficiently utilize their server rooms or network closets by organizing various networking components in a compact and structured manner. The HPE Aruba 2930M 40G 8SR Managed Switch's rack mountable design ensures that businesses can optimize their available space, enabling easy access and maintenance while minimizing clutter. ### Improved Cable Management Managing cables can be a challenging task, especially in environments with multiple devices and connections. The rack mountable design of the HPE Aruba 2930M 40G 8SR Managed Switch provides cable management features, such as cable routing and cable management arms, that help organize and secure cables effectively. This streamlined cable management reduces the risk of cable damage, simplifies troubleshooting, and enhances overall network reliability. ### Enhanced Cooling and Airflow Efficient cooling and airflow are essential for maintaining optimal performance and extending the lifespan of networking equipment. The rack mountable design of the HPE Aruba 2930M 40G 8SR Managed Switch allows for proper ventilation and airflow within the rack, preventing overheating issues. By ensuring adequate cooling, this switch can operate at peak performance levels, reducing the chances of downtime or hardware failures caused by excessive heat. #### Centralized Network Management Rack mounting facilitates centralized network management by providing a structured and easily accessible location for networking equipment. Administrators can conveniently monitor, configure, and troubleshoot devices within the rack, saving time and effort in managing the network infrastructure. This centralized approach streamlines network management tasks, resulting in improved efficiency and reduced downtime. #### Scalability and Easy Expansion As businesses grow, their networking requirements evolve as well. The rack mountable design of the HPE Aruba 2930M 40G 8SR Managed Switch allows for easy expansion and scalability. Additional switches or networking equipment can be seamlessly integrated into the existing rack setup, ensuring a smooth transition without the need for extensive reconfiguration or infrastructure changes. ##### Physical Security The rack mountable design of the HPE Aruba 2930M 40G 8SR Managed Switch enhances physical security by providing a secure and locked environment for networking equipment. The switch can be installed within a locked server room or network closet, preventing unauthorized access and safeguarding sensitive data. This physical security feature adds an extra layer of protection to the network infrastructure, mitigating the risk of unauthorized tampering or theft.

## Product Overview for HPE JL667A ### General Features ? Device Type: Managed, Stackable Layer 3 Switch with 48 Ports ? Enclosure Type: 1U Rack-Mountable for streamlined server integration ? Subtype: Gigabit Ethernet ### Port and Connectivity ? Ports: 48 x 10/100/1000 Ethernet ports for flexible device connections ? Uplink/Stacking Options: 4 x 1 Gigabit / 10 Gigabit / 25 Gigabit / 50 Gigabit SFP56 ? Additional Interfaces: ? 1 x USB-C Console ? 1 x Dedicated Management Port ? 1 x USB Type A for additional device connectivity ### Performance Capabilities ? Switching Capacity: 496 Gbps ? Throughput: Up to 369 Mpps for optimal data processing ? Latency: ? 1 Gbps: 2.28 ?s ? 10 Gbps: 1.46 ?s ? 25 Gbps: 1.9 ?s ? 50 Gbps: 3.49 ?s ? Stacking Bandwidth: 200 Gbps for efficient multi-device synchronization #### Network Capacity ? Virtual Interfaces (SVIs): Up to 1000 ? IPv4/IPv6 Host Table: 32,000 each ? Routing Table Capacity: ? IPv4 Unicast Routes: 64,000 ? IPv6 Unicast Routes: 32,000 ? IPv4 Multicast Routes: 8,000 ? IPv6 Multicast Routes: 8,000 ? Multicast Groups: IGMP: 8,000 | MLD: 4,000 ? Access Control List (ACL) Entries: ? Ingress IPv4 ACL: 5,000 ? Ingress IPv6 ACL: 1,250 ? MAC ACL (Ingress): 5,000 ? Egress IPv4 ACL: 2,000 ? Egress IPv6 ACL: 500 ? MAC ACL (Egress): 2,000 ? MAC Address Table: 32,000 Entries #### Advanced Network Support ? Jumbo Frame Support: Up to 9,198 Bytes ? Routing Protocols: EGP, BGP-4, IGMPv2, IGMPv3, VRRP, OSPFv2, OSPFv3, MSDP, ECMP, MLD, Static IPv6 Routing ? Bidirectional Forwarding Detection (BFD): Enabled ### Management and Remote Access ? Supported Protocols: RMON, SNMP 2c, SNMP 3, Telnet, HTTPS, TFTP, SSH, CLI, XRMON, SFTP for extensive network control ? Authentication Methods: Secure Shell (SSH), RADIUS, TACACS+ for enhanced security ### Storage and Expansion ? Flash Memory: 32 GB for improved device capability HPE Aruba 6300F JL667A 48-ports 1GbE and 4-ports SFP56 Rack-mountable 1u Switch. ## Number Of Ports The HPE Aruba 6300F JL667A Rack-mount Switch is equipped with an impressive 52 ports. This abundance of ports makes it an ideal choice for businesses and organizations that require a high level of connectivity. ### Increased Connectivity With 52 ports, users can connect a wide range of devices to the switch, including servers, computers, printers, and network storage devices. This allows for seamless communication and data transfer between devices, facilitating efficient workflow and boosting productivity. ### Scalability The large number of ports also provides scalability for future growth and expansion. As businesses evolve and their network requirements increase, having ample ports ensures that they can easily integrate new devices without the need for additional switches or complex configurations. ### Redundancy and Resilience In addition to offering increased connectivity, having multiple ports also allows for redundancy and resilience in the network infrastructure. By connecting devices to different ports, businesses can create redundant links that provide failover protection in case of a port or cable failure. This ensures uninterrupted network connectivity and minimizes downtime. ### Flexibility The 52 ports on the HPE Aruba 6300F JL667A Rack-mount Switch offer users flexibility in designing their network topology. They have the freedom to connect devices directly to the switch or use additional networking equipment such as switches or access points to create a hierarchical network structure. This flexibility enables businesses to tailor their network architecture to suit their specific requirements. #### High-Density Environments The abundance of ports is particularly beneficial for high-density environments such as data centers or large offices where numerous devices need to be connected. It eliminates the need for multiple switches, simplifying the network infrastructure and reducing complexity. #### Improved Network Performance The large number of ports also enhances network performance by distributing the network load across multiple devices. This prevents bottlenecks and congestion, ensuring smooth data transmission and reducing latency. Users can enjoy faster and more reliable network connections, resulting in improved productivity and user experience. #### Enhanced Security Having multiple ports allows businesses to implement segmentation strategies to enhance network security. They can separate devices into different VLANs (Virtual LANs) based on their security requirements. This prevents unauthorized access, limits the scope of potential security breaches, and improves overall network security. ##### Simplified Network Management A switch with 52 ports can simplify network management tasks. Businesses can reduce the number of switches in their infrastructure, leading to less complex configurations and easier maintenance. This translates into time and cost savings for IT teams responsible for managing the network. ## Port Types The HPE Aruba 6300F JL667A Rack-mount Switch features 48x1GbE ports and 4xSFP56 ports. This combination of port types offers users a versatile solution for their networking needs. ### 1GbE Ports The 48 1GbE (Gigabit Ethernet) ports provide high-speed connectivity for a variety of devices such as computers, printers, IP phones, and surveillance cameras. These ports support data transfer rates of up to 1 gigabit per second, enabling fast and reliable communication within the local network. ### SFP56 Ports The 4 SFP56 (Small Form-Factor Pluggable) ports on the HPE Aruba 6300F JL667A Rack-mount Switch offer users even greater flexibility. These ports support higher data transfer rates of up to 56 gigabits per second, making them suitable for connecting high-bandwidth devices such as servers or backbone links in larger networks. #### Aggregation and Uplink Connectivity The combination of 1GbE and SFP56 ports allows for aggregation and uplink connectivity. Businesses can aggregate multiple 1GbE ports to create a higher bandwidth connection, increasing network capacity and performance. The SFP56 ports can be used for uplink connections to other switches or network equipment, enabling seamless connectivity between different parts of the network. #### Future-Proofing The inclusion of SFP56 ports future-proofs the switch by supporting emerging network technologies. As the demand for higher speeds increases, these ports provide businesses with the ability to upgrade their network infrastructure without replacing the entire switch. They can simply replace or add modules that support the desired technology, saving time and cost. #### Versatile Network Design The combination of 1GbE and SFP56 ports allows for versatile network design options. Businesses can connect devices with different bandwidth requirements to the appropriate port types, ensuring optimal performance for each device. This flexibility is especially valuable in environments where diverse devices coexist, such as offices with a mix of regular computers and high-performance servers. ##### Compatibility with Existing Infrastructure The inclusion of 1GbE ports ensures compatibility with existing infrastructure that may not require high-speed connections. Businesses can seamlessly integrate the HPE Aruba 6300F JL667A Rack-mount Switch into their current network setup without the need for additional adapters or converters. ## Form Factor The HPE Aruba 6300F JL667A Rack-mount Switch features a compact 1U form factor. This form factor offers several benefits and is highly suitable for businesses with limited rack space or those looking to maximize their available space efficiently. ### Space Saving The 1U form factor is designed to occupy minimal vertical rack space. It allows businesses to stack multiple switches or other networking equipment in a single rack, optimizing the use of limited space. This is particularly advantageous for organizations with space constraints or those planning to expand their network infrastructure without requiring additional racks. ### Easy Installation The compact size of the switch simplifies the installation process. IT teams can easily mount and connect the switch in standard 19-inch server racks or cabinets. The 1U form factor ensures compatibility with industry-standard rack units, making it hassle-free to integrate the switch into existing rack systems. ### Improved Airflow and Cooling Efficiency The 1U form factor allows for better airflow and cooling efficiency within the rack. As the switch occupies less vertical space, there is more room for air circulation, reducing the risk of overheating. This ensures optimal performance and reliability of the switch even in demanding environments. #### Flexibility in Rack Placement The compact size of the HPE Aruba 6300F JL667A Rack-mount Switch provides flexibility in rack placement. It can be positioned in various orientations within the rack, allowing businesses to optimize cable management and accessibility based on their specific requirements. This versatility simplifies maintenance tasks and enhances overall network management. #### Scalability and Future Growth The 1U form factor offers scalability and supports future growth. As businesses expand their network infrastructure, they can easily add additional switches in a stacked configuration without consuming excessive rack space. This scalability ensures that businesses can accommodate increasing connectivity demands without the need for major infrastructure changes. #### Cost-Effective Solution The compact size of the switch translates into cost savings for businesses. The ability to fit multiple switches in a single rack reduces the need for additional racks, saving both upfront costs and ongoing maintenance expenses. Additionally, the improved cooling efficiency leads to reduced energy consumption and lower operating costs. ##### Ideal for Small and Medium-Sized Businesses The 1U form factor is particularly ideal for small and medium-sized businesses (SMBs) that may have limited rack space or budget constraints. It allows these businesses to enjoy enterprise-grade networking capabilities without the need for large-scale infrastructure investments. The HPE Aruba 6300F JL667A Rack-mount Switch provides SMBs with a cost-effective and space-efficient solution for their networking requirements. In conclusion, the HPE Aruba 6300F JL667A Rack-mount Switch's 52 ports, including 48x1GbE and 4xSFP56, offer users increased connectivity, scalability, redundancy, and flexibility. The 1U form factor provides space-saving benefits, easy installation, improved airflow, and cooling efficiency, as well as scalability and cost-effectiveness. These features make the switch a reliable and versatile choice for businesses seeking enhanced network performance and efficient infrastructure management.

## HPE 720966-001 StoreFabric SN6500B Fibre Channel Switch Overview ### Key Product Features ? Device Type: Managed Switch - 48 Ports ? Enclosure: Rack-Mountable (2U) ? Port Configuration: 48 x 16Gb Fibre Channel SFP+ Ports (On Demand) ? Remote Management Options: SNMP v1, SNMP v3, HTTP, SSH, CLI ? Enhanced Features: Full Duplex, Auto-Sensing, Syslog Support, Firmware Upgradable ### Interfaces & Expansion ? Management Interfaces: 1 x 10Base-T/100Base-TX (RJ-45) 1 x RJ-45 for Management 1 x 4 Pin USB Type A for Management 96 x SFP+ Ports ? 1 x 10Base-T/100Base-TX (RJ-45) ? 1 x RJ-45 for Management ? 1 x 4 Pin USB Type A for Management ? 96 x SFP+ Ports ### Power Specifications ? Power Supply Type: Hot-Plug Plug-in Module ? Installed Power Supply Quantity: 2 (Max: 2) ? Redundancy: Yes (1+1 Scheme) ? Power Output: 350 Watts ? Required Voltage: AC 120/230V (50/60Hz) #### Expansion & Connectivity Options The HPE 720966-001 StoreFabric SN6500B Fibre Channel Switch offers excellent scalability with a variety of interfaces and expansion options, allowing seamless network growth. #### Remote Management Features With comprehensive management protocols such as SNMP, HTTP, and SSH, this switch provides easy access for administrators to monitor and configure network settings remotely. ##### Advanced Functionality ? Full Duplex: Enhances data transmission efficiency. ? Auto-Sensing: Automatically adjusts to network requirements. ? Syslog Support: Enables centralized logging for monitoring purposes. ? Upgradeable Firmware: Future-proof your device with the ability to update system software. ## HPE 720966-001 StoreFabric SN6500B Overview The HPE 720966-001 StoreFabric SN6500B 16GB 96-Port/48-Port Active Power Pack+ Fibre Channel Switch is a robust and scalable network solution designed for data centers, enterprise environments, and high-performance computing (HPC) applications. With its advanced features and performance enhancements, this Fibre Channel switch provides reliable, high-speed connectivity for modern data storage and networking infrastructures. ### Key Features of the HPE 720966-001 StoreFabric SN6500B ? High Port Density: With 48 active ports, the switch supports large-scale storage networks, allowing enterprises to expand their Fibre Channel SANs (Storage Area Networks) easily. ? Enhanced Performance: Equipped with a 16GB Fibre Channel architecture, it provides higher throughput, ensuring smooth data transmission and minimal bottlenecks. ? Active Power Pack+ Support: This feature improves power efficiency while ensuring the system can handle the load of demanding workloads. ? Scalability: The SN6500B is designed to grow with the demands of your network, providing the flexibility needed for expanding environments. ? Managed Rack-Mountable Design: The form factor and manageability make it ideal for integration into rack-mounted server infrastructure in data centers. ## Applications and Use Cases ### Data Center Integration Data centers often require high-capacity switches that support extensive storage and networking capabilities. The HPE 720966-001 StoreFabric SN6500B is ideal for managing large-scale Fibre Channel SANs, enabling efficient data traffic management between servers, storage systems, and other network devices. Its scalability and high-performance design make it a perfect choice for environments that demand high availability and performance. ### Enterprise Storage Networks Enterprises with complex storage requirements need reliable networking infrastructure to ensure high-speed data access and protection. The SN6500B Fibre Channel switch offers the necessary bandwidth and reliability for critical applications, such as database management, backup and recovery, and disaster recovery. Its flexibility in supporting both 48-port and 96-port configurations allows enterprises to customize their networks based on storage needs and future growth. ### High-Performance Computing (HPC) HPC environments require low-latency, high-throughput networking solutions to support resource-intensive workloads such as simulations, research, and data analytics. The HPE StoreFabric SN6500B?s 16GB Fibre Channel ports enable high-speed data transfers, ensuring that large datasets and computation tasks are handled seamlessly, making it an excellent fit for HPC clusters. ## Technical Specifications and Performance ### Port Configuration and Expansion The HPE 720966-001 StoreFabric SN6500B comes with 48 active Fibre Channel ports that are designed to support both 8Gbps and 16Gbps port speeds. The switch offers flexible configurations that can scale from 48 ports to a full 96 ports, providing a significant expansion capacity. This makes it adaptable for a range of enterprise, data center, and storage environments that need additional port density for connectivity. #### Redundancy and High Availability The HPE StoreFabric SN6500B is built for continuous operation with built-in redundancy features, such as dual power supplies and cooling fans. This ensures minimal downtime and maintains optimal performance even in the event of a failure. Redundancy is a key factor in maintaining high availability, especially for mission-critical applications where uptime is crucial. #### Advanced Traffic Management The SN6500B switch provides advanced traffic management capabilities to optimize data flows. With the ability to handle high-density SAN traffic, it reduces congestion and ensures that critical workloads are prioritized. The support for quality of service (QoS) helps guarantee that latency-sensitive applications, like real-time analytics or backup services, are given the bandwidth they need. ### High-Speed Performance With support for 16Gbps Fibre Channel technology, the HPE 720966-001 offers high-speed data transmission that ensures seamless connectivity between storage devices and servers. This is especially important for environments where large volumes of data need to be processed quickly, such as in big data analytics or high-performance computing clusters. #### Data Integrity and Security Ensuring data integrity and security is critical for modern network environments. The HPE StoreFabric SN6500B supports advanced features such as data encryption and secure connectivity, protecting data at rest and in transit. Fibre Channel?s inherent reliability ensures that data packets are delivered without error, and built-in security features safeguard sensitive information from unauthorized access. ## Management and Monitoring ### Centralized Network Management The HPE 720966-001 StoreFabric SN6500B comes with robust management tools that allow administrators to monitor and manage network performance efficiently. HPE's StoreFabric management suite provides a centralized platform for configuration, monitoring, and troubleshooting. This streamlines network management and ensures that the switch is always operating at peak performance. ### Real-Time Monitoring and Alerts Real-time monitoring capabilities help network administrators identify potential issues before they impact performance. The SN6500B can send alerts to administrators if thresholds are breached, such as port performance dropping below optimal levels or hardware malfunctions. These alerts allow for proactive maintenance and quick issue resolution, helping to minimize downtime. #### Web-Based Management Interface With a user-friendly web interface, managing the SN6500B becomes an easy task for network administrators. The interface allows for configuring port settings, monitoring switch health, and accessing detailed performance analytics. It?s designed for simplicity and effectiveness, so you can ensure your SAN is always optimized. #### Command-Line Interface (CLI) Support For advanced users and network engineers, the CLI provides more granular control over the switch?s configuration. This interface allows for deeper network configuration, automation, and scripting capabilities to fine-tune the switch?s performance for highly specific use cases. ### Integration with Other HPE Products The HPE 720966-001 StoreFabric SN6500B seamlessly integrates with other HPE networking and storage solutions. Whether you?re utilizing HPE?s 3PAR storage arrays, Nimble Storage, or other enterprise systems, this Fibre Channel switch ensures interoperability within HPE?s comprehensive IT infrastructure. By integrating with the broader HPE ecosystem, you can streamline deployment, management, and support. ## Environmental Considerations ### Power Efficiency Power efficiency is a priority for organizations looking to reduce operational costs and meet sustainability goals. The HPE StoreFabric SN6500B features an Active Power Pack+ which reduces power consumption without compromising performance. This feature helps data centers minimize their energy footprint while still delivering the high-speed performance that today?s storage networks demand. ### Rack-Mountable Design The HPE 720966-001 is designed to be mounted in standard 19-inch server racks, which is common for most enterprise and data center environments. Its compact form factor ensures it doesn?t take up unnecessary space while offering high port density and performance. The design also allows for easy integration into existing infrastructure without requiring significant changes to the setup. ## Support and Warranty ### Comprehensive Warranty Options The HPE StoreFabric SN6500B comes with HPE's comprehensive warranty options, offering peace of mind to customers. This warranty covers critical components such as the hardware, firmware, and technical support, ensuring that any potential issues can be resolved quickly and efficiently. Support plans are available to fit the needs of businesses, ranging from standard support to premium 24/7 assistance. ### Technical Support and Resources In addition to warranty coverage, HPE provides extensive technical support resources for the SN6500B. This includes access to HPE?s knowledge base, online troubleshooting guides, and expert assistance. HPE?s global support network ensures that your business will have the necessary resources and expertise available when needed.