My Cart (0 )
HP (643)
JH179-61101 HPE FlexFabric 5930 4-slot Network Switches.
£584.42£701.30 Incl. VAT
## Key Features of the HPE JH179-61101 FlexFabric 5930-4 Slot Switch ? Designed by HPE, known for cutting-edge technology and reliability. ? Part number (SKU): JH179-61101 for precise identification. ? Rack-mountable 2U enclosure for streamlined integration into existing setups. ? Supports high-speed performance with 1 ?s latency (64-byte packets) and 1429 MPPS throughput. ? Massive routing and switching capacity of 2.56 Tbps. ### Technical Specifications #### Performance and Capacity ? Supports up to 4096 virtual interfaces (VLANs). ? Handles extensive routing tables: 120,000 IPv4 entries and 60,000 IPv6 entries. ? Features a MAC address table with 288k entries, ensuring robust networking. ? Jumbo frame support for frames up to 10,000 bytes, enhancing efficiency for large data transfers. #### Routing Protocols ? Wide protocol compatibility, including OSPF, RIP, BGP-4, IS-IS, and more. ? Support for advanced features like MPLS and Bidirectional Forwarding Detection (BFD). ? Enables static IPv6 routing and next-generation protocols like RIPng and OSPFv3. ### Remote Management and Authentication ? Remote management through SNMP (v1, v2c, v3), Telnet, and SSH for secure administration. ? Authentication protocols include RADIUS, TACACS+, and Secure Shell v2 (SSH2). #### Advanced Features ? Flow control, port mirroring, and sFlow support for efficient traffic management. ? Weighted Fair Queuing (WFQ) and Weighted Round Robin (WRR) for advanced packet scheduling. ? Supports DHCP, ARP, and SNTP for seamless networking integration. ? Redundant virtual routing using Virtual Route Redundancy Protocol (VRRP). ### Connectivity and Expansion #### Interfaces ? Includes one serial console (RJ-45), one management port (RJ-45), and a USB 2.0 Type A port. #### Expansion Options ? Equipped with four total expansion slots, all available for customization. ? Modules are fully scalable, supporting future growth and needs. ### Power Management #### Power Device and Redundancy ? Hot-plug internal power supply for uninterrupted operation during replacements. ? Supports up to four power units for redundancy, ensuring consistent uptime. ? Zero installed power supplies, allowing flexibility in configuration. ## Part Number: JH179-61101 ### Introduction The HPE FlexFabric 5930 4-slot Network Switches are designed for high-performance and scalability, offering a reliable and flexible solution for modern network infrastructure. Among the key features of this exceptional network switch is its unique part number: JH179-61101. In this section, we will delve into the benefits and importance of this specific part number for users, highlighting its significance in optimizing network performance, enhancing scalability, and ensuring seamless operations. ### Enhanced Performance #### Improved Routing Capabilities The JH179-61101 part number represents the advanced routing capabilities of the HPE FlexFabric 5930 4-slot Network Switches. Equipped with powerful routing engines and sophisticated algorithms, these switches can efficiently handle complex routing tasks. With support for dynamic routing protocols such as OSPF, BGP, and IS-IS, this switch enables efficient packet forwarding, reducing latency and optimizing network performance. The advanced routing capabilities provided by the JH179-61101 part number ensure smooth data flow, enabling businesses to handle increasing bandwidth demands without compromising on performance. #### High-Speed Connectivity The JH179-61101 part number also signifies the high-speed connectivity options offered by the HPE FlexFabric 5930 4-slot Network Switches. Featuring multiple high-density ports supporting various speeds ranging from 10GbE to 100GbE, these switches provide flexible connectivity options to meet diverse network requirements. Whether it's connecting servers, storage devices, or other networking equipment, the JH179-61101 part number ensures fast and reliable data transfer, enabling organizations to leverage high-bandwidth applications and services seamlessly. ### Scalability and Expandability #### Modularity and Flexibility The JH179-61101 part number represents the modular design of the HPE FlexFabric 5930 4-slot Network Switches, allowing for easy scalability and expandability. With its four-slot architecture, this switch provides the flexibility to add or remove modules based on evolving network needs. The JH179-61101 part number ensures that businesses can adapt their network infrastructure to accommodate future growth without significant disruptions or investments. This modularity enhances scalability, enabling organizations to scale their networks as their requirements evolve, ensuring a future-proof investment. #### Virtualization Support The JH179-61101 part number also highlights the virtualization support offered by the HPE FlexFabric 5930 4-slot Network Switches. These switches are designed to facilitate virtualized environments, providing seamless integration with leading virtualization platforms such as VMware and Microsoft Hyper-V. By leveraging the JH179-61101 part number, businesses can optimize their virtualized infrastructure, enhancing resource allocation, and improving overall performance. Virtualization support ensures efficient utilization of network resources, enabling organizations to maximize their return on investment. ### Reliability and Resilience #### Redundancy and High Availability The JH179-61101 part number signifies the redundancy and high availability features of the HPE FlexFabric 5930 4-slot Network Switches. Equipped with advanced redundancy mechanisms such as hot-swappable power supplies and fan trays, these switches ensure uninterrupted operations even in case of component failures. The JH179-61101 part number enables businesses to build resilient network architectures, minimizing downtime and ensuring critical applications and services remain accessible at all times. #### Comprehensive Security The JH179-61101 part number also emphasizes the comprehensive security capabilities provided by the HPE FlexFabric 5930 4-slot Network Switches. These switches offer advanced security features such as Access Control Lists (ACLs), MACsec encryption, and secure management protocols. By leveraging the JH179-61101 part number, organizations can mitigate security risks and protect sensitive data from unauthorized access. Comprehensive security ensures the integrity and confidentiality of network communications, making the HPE FlexFabric 5930 4-slot Network Switches an ideal choice for businesses with stringent security requirements. ### Conclusion In conclusion, the JH179-61101 part number plays a crucial role in the overall performance, scalability, and reliability of the HPE FlexFabric 5930 4-slot Network Switches. Its enhanced routing capabilities, high-speed connectivity options, modularity, virtualization support, redundancy, and comprehensive security features make it a valuable asset for businesses of all sizes. By choosing the HPE FlexFabric 5930 4-slot Network Switches with the JH179-61101 part number, organizations can ensure seamless operations, optimize network performance, and future-proof their infrastructure.684429-001 HPE SN3000B 16GB 24-Port Fibre Channel Network Switches.
£2,272.73£2,727.28 Incl. VAT
## Product Overview The HPE 684429-001 SN3000B Fibre Channel switch delivers exceptional performance and scalability for modern data centers. This advanced 16Gb switch supports a wide array of connectivity options, designed to meet the demands of high-availability environments. The switch comes in a compact 1U rack-mountable form factor, providing flexibility in various setups. Its 24 ports, equipped with SFP+ connectivity, ensure seamless data transmission for Fibre Channel networks. ### Key Features of the HPE 684429-001 SN3000B Switch ? Manufacturer: HPE ? Part Number: 684429-001 ? Switch Type: Fibre Channel, 24 Ports ? Form Factor: Rack-mountable, 1U ? Port Type: 24 x SFP+ Ports ? Management Protocols: SNMP v1, SNMP v3, Telnet, HTTP, HTTPS, SSH-2, SMI-S ? Authentication Options: RADIUS, LDAP ? Advanced Features: ISL support, Syslog compatibility, Firmware upgradeable #### Expansion and Connectivity Options ? 1 x 10Base-T/100Base-TX - RJ-45 for management ? 1 x Console - RJ-45 for management access ? 1 x USB - Type A for additional connectivity ? 24 x SFP+ Ports for high-speed fibre channel connections ##### Advanced Management Capabilities ? Supports SNMP v1/v3 for robust network monitoring ? Secure management over HTTPS, Telnet, and SSH-2 ? Built-in syslog support for streamlined logging #### Security and Authentication ? RADIUS and LDAP authentication for secure user access ? Supports secure protocols such as SSH-2 and HTTPS for encrypted communications ##### Upgradability and Future-Proof Design ? Upgradeable firmware to ensure ongoing compatibility with the latest technologies ? Long-term investment value, suitable for growing data center demands ## Port Count: 24 ### Enhanced Connectivity and Flexibility The HPE SN3000B Fibre Channel Network Switch is equipped with 24 ports, making it an ideal solution for organizations with high connectivity requirements. With a port count of 24, this switch offers enhanced connectivity and flexibility for businesses of all sizes. Whether you are a small business looking to expand your network or a large enterprise managing multiple data centers, this switch provides the necessary capacity to handle your network traffic efficiently. #### Scalability One of the key benefits of the HPE SN3000B's 24-port count is its scalability. As your business grows and demands on your network increase, having additional ports allows you to easily add new devices and expand your network infrastructure without the need for additional switches. This scalability ensures that your network can keep up with your organization's growth and adapt to changing needs. #### Improved Performance The 24 ports offered by the HPE SN3000B enable simultaneous connections between multiple devices, resulting in improved network performance. With more ports available, you can connect servers, storage devices, and other networking equipment directly to the switch, reducing latency and increasing data transfer speeds. This improved performance translates into faster access to critical data and applications, enhancing productivity for your organization. #### Redundancy and High Availability Having 24 ports on the HPE SN3000B also allows for redundancy and high availability in your network infrastructure. By connecting devices to multiple ports on the switch, you can create redundant paths for data traffic. In case one port or cable fails, the switch automatically reroutes traffic through an alternate path, ensuring uninterrupted connectivity and minimizing downtime. This feature is especially crucial for organizations that rely on continuous access to their network resources. ##### Cost Savings The 24-port count of the HPE SN3000B can also lead to cost savings for your organization. Instead of investing in multiple smaller switches to accommodate your network requirements, having a single 24-port switch eliminates the need for additional hardware and simplifies network management. This reduction in hardware not only saves on upfront costs but also reduces ongoing maintenance and operational expenses. ## Data Rate: 16GB ### High-Speed Data Transfer The HPE SN3000B Fibre Channel Network Switch boasts a data rate of 16GB, ensuring high-speed data transfer within your network infrastructure. This feature is particularly beneficial for organizations that deal with large volumes of data, such as data centers, financial institutions, and media production companies. With a 16GB data rate, you can quickly and efficiently transfer large files, backup data, and access critical information without any bottlenecks. #### Reduced Latency The 16GB data rate of the HPE SN3000B significantly reduces latency in your network. Latency refers to the delay between the initiation of a data transfer and its actual execution. By providing a higher data rate, this switch minimizes latency and ensures that your network can handle real-time applications and demanding workloads without any lag or delays. This is especially important for industries that rely on time-sensitive operations, such as financial trading or online gaming. #### Future-Proofing Investing in a switch with a 16GB data rate ensures that your network infrastructure is future-proofed. As technology continues to advance, the demand for higher data rates will only increase. By choosing a switch with a 16GB data rate, you can stay ahead of the curve and avoid the need for immediate upgrades when newer, more demanding applications emerge. This future-proofing not only saves your organization from additional costs but also ensures a seamless transition to future technologies. #### Compatibility and Interoperability The 16GB data rate of the HPE SN3000B enables compatibility and interoperability with a wide range of devices and systems. Whether you are connecting servers, storage arrays, or other networking equipment, this switch can handle the high-speed data transfer requirements of modern IT environments. Additionally, the switch supports backward compatibility with lower data rates, allowing you to integrate it into existing network infrastructures without any disruptions. ##### Improved Workflows and Productivity The 16GB data rate of the HPE SN3000B ultimately leads to improved workflows and productivity for your organization. With faster data transfers, employees can access critical information more quickly, collaborate seamlessly, and complete tasks in a more efficient manner. This increased efficiency translates into time savings and enables your organization to achieve higher productivity levels, giving you a competitive edge in today's fast-paced business landscape. ## Part Number: 684429-001 ### Identification and Compatibility The part number 684429-001 is essential for identifying and ensuring compatibility with the HPE SN3000B Fibre Channel Network Switch. This unique identifier allows you to precisely identify and order the correct switch model, ensuring that it fits seamlessly into your existing network infrastructure. By using the part number, you can avoid any compatibility issues and streamline the procurement process. #### Product Support and Warranty The part number also plays a crucial role in product support and warranty services. When contacting customer support or seeking warranty services for your HPE SN3000B switch, providing the part number helps expedite the resolution process. Support technicians can quickly identify your specific switch model and provide targeted assistance or replacement parts if needed. This ensures minimal downtime in case of any technical issues and maximizes the lifespan of your switch. #### Inventory Management For organizations with multiple HPE SN3000B switches or a larger network infrastructure, the part number is instrumental in inventory management. By maintaining an accurate record of each switch's part number, you can easily track and manage your network assets. This simplifies maintenance, upgrades, and replacement processes, allowing you to efficiently manage your network infrastructure and minimize any disruptions. #### Configuration and Documentation The part number is also used in configuration and documentation processes. Whether you are setting up a new switch or documenting your network infrastructure, having the correct part number ensures accurate records and easy reference. Additionally, the part number may provide valuable information about the switch's specifications, features, and compatibility with other networking equipment, enabling efficient troubleshooting and configuration adjustments. ##### Peace of Mind Knowing and utilizing the correct part number, such as 684429-001, provides peace of mind for users of the HPE SN3000B Fibre Channel Network Switch. It ensures that you have the right equipment for your network needs, simplifies maintenance and support processes, and allows for proper inventory management. By leveraging the part number feature, you can operate your network infrastructure with confidence and focus on your organization's core objectives.JL709A HPE 12-Port L3 Managed 100G Ethernet Network Switches
£5,110.39£6,132.47 Incl. VAT
## HPE JL709A Overview ? Explore the key features and specifications of the HPE JL709A switch, a robust networking solution built to support modern data environments. With an array of advanced functionalities, the HPE JL709A is designed to provide high-speed connectivity, improved reliability, and flexible management options. ### Key Details ? Manufacturer: HPE ? Part Number: JL709A ? Product Type: Networking Switch ? Switch Model: 12 Ports Switch #### Performance and Throughput ? Switching Capacity: 2.4 TBPS ? Latency: 1 ?s ? Throughput: 2 MBPS ? Virtual Interfaces: 4094 VLANs per port for 802.1q ### Routing and Protocol Support The HPE JL709A supports a wide range of routing protocols and features to facilitate optimal network performance: ? Routing Protocols: OSPF, EGP, BGP-4, BGP, IGMPv2, IGMP, VRRP, PIM-SM, Static IP Routing, GRE, OSPFv3, IPv4, IPv6 Routing ? Protocol Support: ECMP, PBR, MSTP, RSTP, STP, and more #### Remote Management and Security ? Management Protocols: SNMP, SNMPv3, SNMPv2c, TFTP, SSH, CLI, SFTP, NTP, ICMP ? Security Features: FIPS 140-2 encryption, SSH, Radius, TACACS+ ### Switching Features and Additional Capabilities This switch offers a variety of powerful features to support both enterprise and data center networking: ? Flow Control, IP Routing, DHCP and ARP Support ? VLAN Support, IGMP Snooping, Port Mirroring ? Quality of Service (QoS), Spanning Tree Protocols (STP, RSTP, MSTP) ? Multiple Spanning Tree Protocol (MSTP) Support ? Bidirectional Forwarding Detection (BFD), UDLD ? MACSec, VxLAN Tunnel Endpoints (VTEP) Support ? Multicast Routing, PIM-SM, IGMPv3 Support #### Networking Enhancements ? Link Aggregation Control Protocol (LACP) ? Congestion Control, Packet Storm Protection ? Multicast Source Discovery Protocol (MSDP) ? Ethernet Ring Protection Switching (ERPS) ### Compliant Standards The HPE JL709A adheres to the latest networking standards for seamless integration and compatibility: ? IEEE 802.3z, IEEE 802.1d, IEEE 802.1q, IEEE 802.1p ? IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae ? IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba ? IEEE 802.1ax, IEEE 802.1ak #### Processor and Memory ? Processor: 1.8 GHz ? RAM: 16 GB ? Flash Memory: 32 GB ### Expansion and Connectivity Options The JL709A offers a variety of ports and connectivity options to meet your network?s needs: ? Interfaces: 12 x 100Gbit/40Gbit LAN, 1 x Serial (Console), 1 x USB-C Console ? Additional ports include 1 x LAN RJ-45, 1 x USB Type-A ## Ports The HPE JL709A L3 Managed switch is equipped with an impressive 12 ports. This feature sets it apart from other switches on the market, making it an excellent choice for businesses and organizations that require a high level of connectivity. ### Increased Connectivity The 12 ports on the HPE JL709A L3 Managed switch provide users with a multitude of options for connecting various devices and expanding their network. With more ports available, businesses can connect multiple devices such as computers, printers, servers, and IP phones without the need for additional switches or hubs. #### Simplified Network Infrastructure Having 12 ports on a single switch helps simplify network infrastructure and reduces the complexity of managing multiple switches. With fewer devices to set up and manage, IT administrators can save time and effort when it comes to network configuration and troubleshooting. #### Improved Network Performance The abundance of ports on the HPE JL709A L3 Managed switch ensures that there is no bottleneck in network traffic. Each port can handle a significant amount of data simultaneously, allowing for smooth and uninterrupted communication between devices. This is especially important for businesses that rely heavily on data-intensive applications or require real-time communication between multiple devices. #### Flexibility and Scalability The 12 ports offer flexibility and scalability for businesses that anticipate expansion in the future. With additional ports available, it becomes easier to add new devices to the network without disrupting existing connections. This feature is particularly beneficial for growing businesses or organizations that frequently add new employees or devices to their network infrastructure. ##### Cost-Effective Solution The HPE JL709A L3 Managed switch's 12-port configuration offers a cost-effective solution for businesses. Instead of investing in multiple switches to accommodate all their devices and connections, businesses can save money by using a single switch with ample ports. This not only reduces initial deployment costs but also lowers ongoing maintenance and management expenses. ## Speed One of the standout features of the HPE JL709A L3 Managed switch is its support for 100G Ethernet speed. This makes it an ideal choice for businesses that require high-speed connectivity to meet their demanding networking needs. ### Lightning-Fast Data Transfer With 100G Ethernet speed, the HPE JL709A L3 Managed switch enables lightning-fast data transfer between devices connected to the network. This is particularly crucial for businesses that deal with large files, such as multimedia content or data-intensive applications. The high-speed connection ensures minimal lag, faster data backup and recovery, and quick access to critical information. #### Enhanced Productivity The speed offered by the HPE JL709A L3 Managed switch significantly enhances productivity in a business environment. Employees can perform tasks more efficiently, as they experience reduced waiting times when accessing shared resources or transferring files. This feature is particularly beneficial for businesses that rely on collaborative work or real-time data analysis. #### Future-Proof Networking The support for 100G Ethernet speed future-proofs the network infrastructure of businesses. As technology advances and data requirements continue to grow, having a switch that can handle high-speed connections ensures compatibility with future devices and applications. Investing in a switch with 100G Ethernet speed provides businesses with the peace of mind that their network infrastructure can adapt to evolving technological demands. #### Improved Network Reliability The high-speed connectivity of the HPE JL709A L3 Managed switch contributes to improved network reliability. With faster data transfer rates, there is less chance of congestion or bottlenecks in network traffic. This ensures smooth communication between devices and minimizes the risk of downtime or disruptions in critical business operations. ##### Competitive Advantage The HPE JL709A L3 Managed switch's support for 100G Ethernet speed gives businesses a competitive advantage in today's fast-paced digital landscape. It enables them to stay ahead of the competition by providing a reliable and high-performing network infrastructure. This feature is particularly valuable for businesses that heavily rely on data-intensive applications, such as video streaming, cloud services, or big data analytics. In conclusion, the HPE JL709A L3 Managed switch offers significant benefits to users through its 12 ports and support for 100G Ethernet speed. The ample number of ports provides increased connectivity, simplifies network infrastructure, improves network performance, and offers flexibility and scalability. The 100G Ethernet speed ensures lightning-fast data transfer, enhances productivity, future-proofs networking, improves network reliability, and provides a competitive advantage. Whether used in small businesses or large enterprises, the HPE JL709A L3 Managed switch proves to be a valuable asset for any organization seeking a robust and high-performing network solution.JW669-61001 HPE 48-Ports SFP+ 10Gbps 100Base-T Mobility Access Network Switches
£949.35£1,139.22 Incl. VAT
## Overview of HPE Aruba S2500-48T High-Performance Network Switch ### Key Features and Capabilities ? Brand: HPE ? Model Number: JW669-61001 ? Ports: 48 Gigabit Ethernet ports for fast connectivity ? Additional Connectivity: 4 SFP/SFP+ ports for 10 Gigabit Ethernet ? Power over Ethernet (PoE): Flexible installation options with PoE support ? Included Accessories: 50cm Direct-Attach Cable (DAC) for seamless ArubaStack integration ### Traffic Management and Security ? Advanced Quality of Service (QoS): Optimized traffic management for better performance ? Comprehensive Security Features: Robust protection for your network infrastructure ? VLAN Support: Allows efficient segmentation for secure traffic routing #### Advanced Networking Protocols ? Link Aggregation Control Protocol (LACP): Combines multiple links for increased bandwidth and redundancy ? Spanning Tree Protocol (STP): Prevents network loops and ensures efficient data flow ? Rapid Spanning Tree Protocol (RSTP): Faster network convergence for improved uptime ### Deployment and Management ? ArubaStack Support: Simplified setup and management for multi-device environments ? Layer 2 and Layer 3 Switching: Versatile switching capabilities for varied network topologies ? Scalable and high-density ports ensure rapid network expansion ? Perfect for businesses needing both Gigabit and 10 Gigabit Ethernet ? Advanced features like PoE and QoS make it suitable for dynamic, high-demand environments ## Ports The HPE JW669-61001 Network Switch is equipped with an impressive 48 ports, making it a versatile and powerful networking solution for businesses of all sizes. With this extensive number of ports, users can easily connect multiple devices and expand their network infrastructure without any hassle. ### Increased Connectivity The 48 ports offered by the HPE JW669-61001 provide users with the ability to connect a wide range of devices simultaneously. This is particularly beneficial in environments where there are numerous workstations, servers, printers, and other networked devices that need to be connected. With this switch, businesses can ensure that all their devices have a reliable and high-speed connection, promoting efficient communication and collaboration. #### Flexible Network Expansion The abundance of ports allows for easy network expansion as businesses grow. Whether it's adding new workstations or integrating additional servers, the HPE JW669-61001 can accommodate the increasing demands of a growing organization. This scalability ensures that businesses don't face any limitations when it comes to expanding their network infrastructure. ##### Streamlined Cable Management Having 48 ports in a single switch reduces cable clutter and simplifies cable management. With fewer switches needed to accommodate multiple devices, businesses can organize their cables more efficiently, reducing the risk of tangled wires or accidental disconnections. This not only enhances the aesthetic appeal of the network setup but also minimizes the time and effort required for troubleshooting and maintenance. ## Speed The HPE JW669-61001 Network Switch boasts an impressive speed of 10Gbps, providing users with a high-performance networking solution that can handle demanding applications and data-intensive tasks with ease. ### Rapid Data Transfer The 10Gbps speed offered by this switch ensures lightning-fast data transfer rates between connected devices. This is especially crucial in environments where large files need to be transferred frequently, such as multimedia production studios or data centers. With this switch, businesses can experience seamless file transfers, minimizing downtime and improving productivity. #### Enhanced User Experience The high-speed capabilities of the HPE JW669-61001 enable smooth and uninterrupted communication between devices. This is particularly beneficial in scenarios where real-time collaboration is essential, such as video conferences or online gaming. Users can enjoy lag-free experiences and reliable connectivity, enhancing their overall satisfaction and productivity. ##### Future-Proof Networking As technology continues to advance, the demand for faster network speeds will only grow. By investing in a switch with 10Gbps capability, businesses can future-proof their network infrastructure and ensure that it can handle upcoming technologies and bandwidth-intensive applications. This eliminates the need for frequent upgrades or replacements, saving both time and money in the long run. ## Interface The HPE JW669-61001 Network Switch features SFP+ interfaces, providing users with a versatile and efficient means of connecting various devices to their network. ### Flexibility in Connectivity The SFP+ interface offers users the flexibility to connect different types of devices to their network switch. Whether it's fiber optic cables for long-distance connections or copper cables for shorter distances, users can easily choose the appropriate SFP+ transceiver module to suit their specific requirements. This versatility allows businesses to adapt their network infrastructure to different environments and networking standards. #### High-Speed Data Transmission The SFP+ interface supports high-speed data transmission, making it ideal for demanding applications that require rapid data transfer rates. Whether it's transferring large files or streaming high-definition media, users can rely on the HPE JW669-61001 to provide a stable and efficient connection without compromising on speed. ##### Integration with Existing Infrastructure Many businesses already have networking equipment that utilizes SFP+ interfaces. The HPE JW669-61001's compatibility with these existing devices allows for seamless integration, eliminating the need for costly replacements or upgrades. Users can leverage their current investments while still benefiting from the advanced features and capabilities of this switch. ## Support The HPE JW669-61001 Network Switch offers support for 100Base-T, ensuring compatibility with a wide range of devices and network configurations. ### Compatibility with Legacy Devices The support for 100Base-T allows businesses to connect legacy devices that may not have the capability to operate at higher speeds. This is particularly beneficial in industries where certain equipment or systems have not yet been upgraded to support faster networking technologies. With this switch, businesses can ensure that their entire network remains connected and operational, regardless of the age or capabilities of individual devices. #### Seamless Integration The support for 100Base-T ensures seamless integration with existing network configurations. Whether it's combining older networking equipment with newer devices or creating hybrid networks, this switch provides the necessary compatibility for smooth communication and interoperability between various components. ##### Flexibility in Network Design By supporting 100Base-T, the HPE JW669-61001 offers businesses the flexibility to design their network in a way that best suits their specific needs. Whether it's establishing separate segments for different departments or integrating devices with varying speed requirements, this switch allows for versatile network configurations without sacrificing compatibility. ## Feature The HPE JW669-61001 Network Switch boasts the feature of Mobility Access, providing users with enhanced mobility and flexibility in their network connectivity. ### Wireless Connectivity The Mobility Access feature enables wireless connectivity, allowing users to connect their devices to the network without the need for physical cables. This is particularly advantageous in environments where mobility is crucial, such as offices with mobile workstations or retail stores with portable point-of-sale systems. Users can enjoy seamless connectivity and freedom of movement without being restricted by wired connections. #### Scalable Mobility Solutions The Mobility Access feature supports scalability, making it suitable for businesses of all sizes. Whether it's a small office or a large enterprise, this switch can accommodate the mobility needs of different organizations. As businesses grow and expand, additional access points can be easily added to ensure comprehensive wireless coverage throughout the premises. ##### Enhanced Productivity and Collaboration By enabling wireless connectivity, the HPE JW669-61001 promotes enhanced productivity and collaboration within teams. Users can effortlessly connect their devices to the network, share files, and collaborate on projects without the constraints of physical cables. This flexibility fosters a more dynamic and efficient work environment, leading to improved productivity and innovation. ## AdditionalInfo The HPE JW669-61001 Network Switch supports Non-nested JSON format for efficient data management and simplified integration with other systems. ### Data Organization and Management The Non-nested JSON format allows for structured and organized data storage, making it easier for users to manage and retrieve information. By utilizing this format, businesses can ensure that their network switch stores data in a standardized and easily accessible manner. This facilitates efficient data management practices, reducing the time and effort required for data administration tasks. #### Interoperability with Other Systems The Non-nested JSON format enhances the switch's compatibility with other systems and applications that also utilize this format. Whether it's integrating with network management software or exchanging data with third-party platforms, users can rely on the HPE JW669-61001 to seamlessly communicate and share information. This interoperability promotes streamlined workflows and enables the switch to be part of a comprehensive and interconnected network ecosystem. ##### Simplified Development and Integration The support for Non-nested JSON format simplifies the development and integration process for businesses. Developers can easily work with this standardized format, reducing the complexity and time required for integration tasks. This ensures a faster time-to-market for new applications or systems that rely on the HPE JW669-61001, providing businesses with a competitive advantage in their industry.JH390-61001 HPE FlexFabric 5940 Switch with 48 SFP+ and 6 QSFP28 Ports
£6,032.47£7,238.96 Incl. VAT
## Product Specifications of HPE JH390-61001 #### Overview The HPE JH390-61001 Flexfabric 5940 is a high-performance managed switch designed for rack-mount installation, featuring an extensive array of ports and advanced capabilities. #### Key Specifications ? Device Type: Managed Switch with 48 Ports, Layer 3, Stackable ? Rack Unit Size: 1U, designed for rack mounting ? Port Configuration: 48 x 1/10 Gigabit SFP+ 6 x 100 Gigabit QSFP28 ? 48 x 1/10 Gigabit SFP+ ? 6 x 100 Gigabit QSFP28 #### Performance Metrics ? Routing/Switching Capacity: 2160 Gbps ? Latency: Less than 1 ms at 10 Gbps #### Capacity Details ? IPv4 Routing Table: Up to 120,000 entries ? IPv6 Routing Table: Up to 60,000 entries ? MAC Address Table: 288,000 entries ? Jumbo Frame Support: Yes ? Maximum Stackable Units: 9 #### Routing Protocols Supported The switch supports a wide range of routing protocols, including: ? OSPF, BGP-4, IS-IS, RIP-1, RIP-2 ? IGMP, VRRP, OSPFv2, OSPFv3 ? Static IPv6 Routing, RIPng, IS-ISv6, BGP-4+ ? MPLS, Bidirectional Forwarding Detection (BFD) #### Remote Management Options Manage the switch remotely with protocols such as: ? SNMP v1, RMON, Telnet ? SNMP v3, SNMP v2c, SSH-2, CLI #### Authentication and Security Features ? Secure Shell (SSH) ? RADIUS, TACACS+ ? SSH v2 support #### Additional Features ? Flow Control and DHCP Support ? Port Mirroring and IPv6 Compatibility ? Weighted Fair Queuing (WFQ) ? Rapid Spanning Tree Protocol (RSTP) ? Multiple Spanning Tree Protocol (MSTP) ? Access Control List (ACL) Support ? Quality of Service (QoS) ? Device Link Detection Protocol (DLDP) ? Equal-Cost Multipath (ECMP) ? LLDP Support and DHCP Protection ? Registered State Change Notification (RSCN) ? Strict Priority (SP) and Edge Virtual Bridging (EVB) ? Intelligent Resilient Framework (IRF) ? Reverse Airflow Support ? SNMP Support and Cut-through Switching ? FCoE Support and In-Service Software Upgrade (ISSU) ? IP Source Guard and VXLAN Tunnel Endpoints (VTEP) Support #### Compliance Standards This switch adheres to various IEEE standards, including: ? IEEE 802.3, 802.1d, 802.1q, 802.1p ? IEEE 802.3x, 802.3ad (LACP), 802.1w ? IEEE 802.1x, 802.3ae, 802.1s, 802.1ad ? IEEE 802.3ah, 802.1ag, 802.1ax, 802.1qaz ? IEEE 802.3ag #### Memory Specifications ? RAM: 4 GB SDRAM ? Flash Memory: 1 GB #### Expansion and Connectivity Connectivity options include: ? 48 x Gigabit/10 Gbit LAN SFP+ ? 6 x 100 Gbit LAN QSFP28 ? 1 x Serial (Console) RJ-45 ? 1 x Management (LAN) RJ-45 ? 1 x USB 2.0 #### Power Specifications The switch features an internal power supply for efficient operation. ## Ports The HPE FlexFabric 5940 Switch boasts an impressive number of ports, with a total of 48 10GbE ports and 6 40GbE ports. This feature sets it apart from other switches in the market, offering users a multitude of benefits and ensuring that their networking needs are met effectively. ### Increased Connectivity With 48 10GbE ports, the HPE FlexFabric 5940 Switch provides ample connectivity options for organizations of all sizes. Whether you have a small business or a large enterprise, this switch allows you to connect multiple devices such as servers, storage systems, and workstations, enabling efficient communication and data transfer. ### High-speed Data Transfer The inclusion of 6 40GbE ports in the HPE FlexFabric 5940 Switch further enhances its capabilities by offering high-speed data transfer. These ports allow for lightning-fast communication between devices, making it ideal for bandwidth-intensive applications and data-intensive workloads. With this switch, you can experience incredibly fast data transfer rates, ensuring minimal latency and improved overall network performance. #### Improved Productivity The high number of ports on the HPE FlexFabric 5940 Switch translates into improved productivity for businesses. With more ports available, you can connect more devices directly to the switch without the need for additional equipment or complex configurations. This simplifies network management and reduces the risk of bottlenecks, ensuring that your team can work efficiently without experiencing network congestion. #### Flexibility and Scalability The HPE FlexFabric 5940 Switch's extensive port offering provides users with flexibility and scalability options for their network infrastructure. The combination of 48 10GbE ports and 6 40GbE ports allows for easy expansion as your organization grows or your networking needs evolve. You can effortlessly add new devices or upgrade existing ones without worrying about running out of ports, ensuring that your network can adapt to changing requirements without any hassle. ##### Enhanced Virtualization Virtualization has become a crucial aspect of modern IT environments, enabling businesses to optimize resource utilization and improve efficiency. The HPE FlexFabric 5940 Switch's abundant ports make it an ideal choice for virtualized environments. With the ability to connect numerous virtual machines and servers, this switch enables seamless communication between various virtualized resources, ensuring smooth operations and maximizing the benefits of virtualization. ## Part Number The HPE FlexFabric 5940 Switch's part number, JH390-61001, is an essential aspect of the product that holds significant importance for users. Let's explore the benefits and importance of this feature in more detail. ### Product Identification The part number serves as a unique identifier for the HPE FlexFabric 5940 Switch, making it easy for users to identify and differentiate it from other switches available in the market. This identification is vital when it comes to ordering, managing inventory, or seeking support for the product. By having a distinct part number like JH390-61001, users can ensure they are purchasing the correct switch model and easily communicate their requirements to suppliers or support teams. ### Compatibility and Interchangeability The part number also plays a crucial role in ensuring compatibility and interchangeability with other components or accessories within the HPE FlexFabric product line. By referring to the part number JH390-61001, users can identify which specific switch model they possess and determine which accessories or modules are compatible with their device. This information is invaluable when expanding or upgrading your network infrastructure as it ensures seamless integration and minimizes compatibility issues. #### Easier Technical Support In the event of technical issues or inquiries, having the correct part number like JH390-61001 makes it significantly easier to seek technical support from HPE or authorized resellers. When contacting support teams, providing the part number ensures that the support personnel can quickly identify the specific model you are using and offer precise and accurate assistance. This streamlines the troubleshooting process and reduces downtime, allowing your business to get back up and running promptly. #### Product Documentation Product documentation is a valuable resource for users, providing essential information on the installation, configuration, and maintenance of the HPE FlexFabric 5940 Switch. The part number serves as a reference point when accessing relevant documentation, ensuring that users can easily find the specific manuals or guides that correspond to their switch model. This improves efficiency when setting up or managing the switch, allowing users to follow step-by-step instructions tailored to their device. ##### Warranty and Service Coverage The part number also plays a role in warranty and service coverage for the HPE FlexFabric 5940 Switch. By referencing the specific part number JH390-61001, users can ensure that their device is eligible for warranty support and easily register their product for any extended service coverage options available. This provides peace of mind, knowing that in case of any hardware failures or issues covered under warranty, HPE will provide the necessary repairs or replacements promptly. In conclusion, the HPE FlexFabric 5940 Switch's impressive port offering of 48 10GbE ports and 6 40GbE ports provides increased connectivity, high-speed data transfer, improved productivity, flexibility, scalability, and enhanced virtualization capabilities. Additionally, its unique part number JH390-61001 serves as an identifier for easy product identification, ensures compatibility and interchangeability, facilitates technical support, aids in accessing product documentation, and determines warranty and service coverage eligibility. These features and benefits make the HPE FlexFabric 5940 Switch a reliable and versatile choice for organizations seeking a powerful and efficient networking solution.JH390A HPE Flexfabric 5940 48sfp+ 6qsfp28 48 Ports Rack-mountable Switches
£6,032.47£7,238.96 Incl. VAT
## Product Specifications ### Overview of the HPE JH390A FlexFabric 5940 Switch The HPE JH390A FlexFabric 5940 is a high-performance switch designed for modern networking needs, featuring 48 SFP+ ports and 6 QSFP28 ports. It?s ideal for organizations seeking reliable and efficient data transmission. #### Key Characteristics ? Device Classification: Managed L3 Switch with 48 Ports, Stackable ? Form Factor: 1U Rack-Mountable Enclosure ? Ports: 48 x 1G/10G SFP+ and 6 x 100G QSFP28 ### Performance Metrics #### Routing and Switching Capabilities ? Switching Capacity: 2160 Gbps ? Latency (10G): Less than 1 microsecond ? IPv4 Routing Table: 120,000 entries ? IPv6 Routing Table: 60,000 entries ? MAC Address Table Size: 288,000 entries ? Jumbo Frame Support: Yes #### Stacking and Protocol Support ? Maximum Stack Units: Up to 9 ? Supported Routing Protocols: OSPF BGP-4 IS-IS RIP v1 and v2 IGMP VRRP Static IPv6 Routing Bidirectional Forwarding Detection (BFD) ? OSPF ? BGP-4 ? IS-IS ? RIP v1 and v2 ? IGMP ? VRRP ? Static IPv6 Routing ? Bidirectional Forwarding Detection (BFD) ### Remote Management and Security #### Management Protocols ? SNMP v1, v2c, v3 ? RMON ? Telnet ? SSH-2 ? Command-Line Interface (CLI) #### Authentication Methods ? Secure Shell (SSH) ? RADIUS ? TACACS+ ? SSH v2 (SSH2) ### Additional Features ? Flow Control ? DHCP Support ? Port Mirroring ? Weighted Fair Queuing (WFQ) ? Rapid Spanning Tree Protocol (RSTP) ? Multiple Spanning Tree Protocol (MSTP) ? Access Control Lists (ACL) ? Quality of Service (QoS) ? Device Link Detection Protocol (DLDP) ? Equal-Cost Multipath (ECMP) ? Intelligent Resilient Framework (IRF) ? Reverse Airflow Support ? In-Service Software Upgrade (ISSU) ? IP Source Guard ? VXLAN Tunnel Endpoints (VTEP) Support ### Compliance and Standards #### Industry Standards ? IEEE 802.3 ? IEEE 802.1d ? IEEE 802.1q ? IEEE 802.1p ? IEEE 802.3x ? IEEE 802.3ad (LACP) ? IEEE 802.1w ? IEEE 802.1x ? IEEE 802.3ae ? IEEE 802.1s ? IEEE 802.1ad ? IEEE 802.3ah ? IEEE 802.1ag ? IEEE 802.1ax ? IEEE 802.1qaz ? IEEE 802.3ag ### Memory and Connectivity ? RAM: 4 GB SDRAM ? Flash Memory: 1 GB #### Interfaces Available ? 48 x 1G/10G SFP+ ? 6 x 100G QSFP28 ? 1 x Serial (Console) RJ-45 ? 1 x Management (LAN) RJ-45 ? 1 x USB 2.0 ### Power Specifications ? Power Source: Internal Power Supply ## Ports ### 48 Ports for Enhanced Connectivity The HPE JH390A Rack-mountable Switch is equipped with an impressive 48 ports, providing users with extensive connectivity options. With this many ports available, users can easily connect multiple devices to the switch, creating a robust and efficient network infrastructure. Whether it's connecting computers, printers, servers, or other network devices, the abundance of ports ensures that users have enough capacity to accommodate their network requirements. #### Improved Scalability and Flexibility The 48 ports on the HPE JH390A Rack-mountable Switch offer improved scalability and flexibility for users. The switch allows businesses to expand their network without the need for additional switches or complicated configurations. Users can simply plug in their devices to any available port, making it easy to add or remove devices as needed. This flexibility is particularly beneficial for growing businesses that require a scalable network infrastructure to support their expanding operations. #### Efficient Data Transfer and Reduced Network Congestion With 48 ports, the HPE JH390A Rack-mountable Switch ensures efficient data transfer and reduced network congestion. Each port provides a dedicated connection for devices, allowing for fast and reliable data transmission. This eliminates bottlenecks and ensures a smooth flow of data across the network. Additionally, the large number of ports prevents overcrowding and minimizes network congestion, leading to improved performance and overall network efficiency. #### Versatile Applications The 48 ports on the HPE JH390A Rack-mountable Switch offer versatile applications for various industries and environments. Whether it's in a small office, a data center, or an enterprise-level organization, the switch can accommodate a wide range of networking needs. Its numerous ports allow for the connection of different devices, such as computers, printers, IP phones, surveillance cameras, and more. This versatility makes the HPE JH390A Rack-mountable Switch suitable for diverse networking setups and ensures compatibility with various devices. ##### Seamless Collaboration and Resource Sharing The 48 ports on the HPE JH390A Rack-mountable Switch facilitate seamless collaboration and resource sharing among users. With multiple devices connected to the switch, employees can easily share files, access shared resources, and collaborate on projects. This promotes productivity and efficiency within the organization, as it eliminates the need for individual connections to each device. Whether it's sharing documents, printing files from a centralized printer, or accessing shared network storage, the numerous ports on the switch enable smooth collaboration and resource sharing. ##### Redundancy and High Availability The 48 ports on the HPE JH390A Rack-mountable Switch offer redundancy and high availability for critical network applications. With multiple ports available, users can create redundant connections to ensure continuous network operation even if one port fails. This redundancy is essential for businesses that rely heavily on their network infrastructure to support mission-critical applications. By providing multiple connection options, the switch ensures uninterrupted network connectivity and minimizes downtime in case of port failure. ## Sfp+ ### 48 Sfp+ Ports for Enhanced Connectivity The HPE JH390A Rack-mountable Switch features an impressive 48 Sfp+ ports, offering users enhanced connectivity options. The Sfp+ ports are designed to support high-speed data transmission over fiber optic cables, making them ideal for environments that require fast and reliable network connections. With 48 Sfp+ ports at their disposal, users can connect a wide range of devices and take advantage of the benefits offered by fiber optic technology. #### High-Speed Data Transfer The Sfp+ ports on the HPE JH390A Rack-mountable Switch enable high-speed data transfer, allowing users to transmit large amounts of data quickly and efficiently. With data rates of up to 10 Gigabits per second (Gbps), the Sfp+ ports ensure that users can transfer files, stream multimedia content, and access network resources without experiencing any lag or latency. This high-speed data transfer capability is especially beneficial for businesses that deal with data-intensive applications and require fast network connections. #### Long-Distance Connectivity One of the key advantages of Sfp+ ports is their ability to support long-distance connectivity through fiber optic cables. Unlike traditional copper cables, fiber optic cables can transmit data over much longer distances without experiencing signal degradation. This makes Sfp+ ports ideal for connecting devices that are located far apart or in different areas of a building. With the HPE JH390A Rack-mountable Switch's 48 Sfp+ ports, users can establish reliable long-distance connections and ensure seamless communication across their network infrastructure. #### Future-Proof Network Infrastructure Investing in a switch with 48 Sfp+ ports ensures a future-proof network infrastructure. As technology advances and network requirements evolve, fiber optic connections are becoming increasingly prevalent. By opting for a switch with Sfp+ ports, users can future-proof their network infrastructure and be prepared for the demands of tomorrow's high-speed networks. The HPE JH390A Rack-mountable Switch's 48 Sfp+ ports provide users with the flexibility to adapt their network to changing technologies and ensure compatibility with future devices. ##### Improved Network Performance and Reliability The Sfp+ ports on the HPE JH390A Rack-mountable Switch contribute to improved network performance and reliability. The high-speed data transfer capability of the Sfp+ ports ensures that users can access network resources quickly, enabling efficient data-intensive applications and reducing latency. Additionally, the use of fiber optic cables for long-distance connectivity enhances network reliability by minimizing signal loss and interference. This combination of high performance and reliability ensures that users can rely on the switch for their critical networking needs. ##### Secure and Resilient Connections Sfp+ ports offer secure and resilient connections, making them suitable for environments that require robust network security. Fiber optic cables used with Sfp+ ports are difficult to tap or intercept, providing an added layer of security for sensitive data transmission. Additionally, the HPE JH390A Rack-mountable Switch's 48 Sfp+ ports support advanced security features such as VLAN tagging and access control lists, further enhancing network security. By utilizing Sfp+ ports, users can establish secure and resilient connections to protect their data from unauthorized access or interception. ## Qsfp28 ### 6 Qsfp28 Ports for Enhanced Connectivity The HPE JH390A Rack-mountable Switch is equipped with 6 Qsfp28 ports, providing users with enhanced connectivity options. The Qsfp28 ports are designed to support high-speed data transmission over copper or fiber optic cables, making them suitable for a wide range of networking applications. With 6 Qsfp28 ports available, users can connect multiple devices and take advantage of the benefits offered by this advanced technology. #### High-Speed Data Transfer The Qsfp28 ports on the HPE JH390A Rack-mountable Switch enable high-speed data transfer, allowing users to transmit large amounts of data quickly and efficiently. With data rates of up to 100 Gigabits per second (Gbps), the Qsfp28 ports ensure that users can transfer files, stream multimedia content, and access network resources without experiencing any lag or latency. This high-speed data transfer capability is especially beneficial for businesses that deal with data-intensive applications and require fast network connections. #### Flexible Connectivity Options The HPE JH390A Rack-mountable Switch's 6 Qsfp28 ports offer versatile connectivity options for different networking requirements. The ports can be used with either copper or fiber optic cables, providing users with the flexibility to choose the most suitable medium for their specific needs. Whether it's connecting devices within a short distance using copper cables or establishing long-distance connections with fiber optic cables, the Qsfp28 ports can accommodate various connectivity scenarios. #### Advanced Network Performance With 6 Qsfp28 ports, the HPE JH390A Rack-mountable Switch delivers advanced network performance. The high-speed data transfer capability of the Qsfp28 ports ensures that users can achieve maximum network throughput, enabling fast and efficient communication between devices. This is particularly important for bandwidth-intensive applications such as video streaming, virtualization, and cloud computing, where a high-performance network infrastructure is crucial for optimal operation. ##### Scalable Network Expansion The 6 Qsfp28 ports on the HPE JH390A Rack-mountable Switch facilitate scalable network expansion. Users can easily connect additional devices or expand their network infrastructure by utilizing the available Qsfp28 ports. This scalability is essential for businesses that anticipate future growth or need to accommodate increasing network demands. The switch's Qsfp28 ports provide a cost-effective and efficient solution for expanding network capacity without the need for additional switches or complex configurations. ##### Reliable and Resilient Connections Qsfp28 ports offer reliable and resilient connections, ensuring uninterrupted network operation even in demanding environments. The HPE JH390A Rack-mountable Switch's 6 Qsfp28 ports support advanced features such as error correction and fault tolerance, minimizing the risk of data loss or network downtime. Additionally, Qsfp28 ports are designed to be hot-swappable, allowing for easy replacement or addition of devices without disrupting the network. This reliability and resilience make the switch ideal for mission-critical applications where network availability is paramount.JH391-61001 HPE FlexFabric 5940 Rack-Mountable Network Switches.
£7,006.49£8,407.79 Incl. VAT
## Comprehensive Overview of HPE JH391-61001 ### Key Hardware Specifications ? Device Type: Layer 3 managed switch with 48 ports, designed for stacking ? Form Factor: Rack-mountable, 1U compact design for easy integration ? Port Configuration: 48 x 10/100/1000/10000 Ethernet ports 6 x 100 Gigabit QSFP28 ports ? 48 x 10/100/1000/10000 Ethernet ports ? 6 x 100 Gigabit QSFP28 ports ### Performance Capabilities ? Routing/ Switching Capacity: A high throughput of 2160 Gbps ? Latency (10 Gbps): Ultra-low latency of less than 1 microsecond ? Jumbo Frame Support: Enabled for larger data packets #### Routing and MAC Address Capacity ? IPv4 Routing Table Entries: Supports up to 120,000 entries ? IPv6 Routing Table Entries: Holds up to 60,000 entries ? MAC Address Table: 288K entry support for extensive networking needs ### Advanced Routing Protocols ? Supports a wide range of protocols such as OSPF, BGP-4, IS-IS, RIP-1, and RIP-2 ? IPv6 routing protocols include OSPFv3, RIPng, IS-ISv6, and BGP-4+ ? Advanced features like MPLS and Bidirectional Forwarding Detection (BFD) enhance reliability #### Management and Monitoring ? Remote Management Protocols: SNMP versions 1, 2c, 3, RMON, Telnet, SSH-2, CLI ? Real-time monitoring and easy management through SNMP, RMON, and SSH ### Comprehensive Feature Set ? Flow Control: Optimized for efficient traffic management ? Port Mirroring: Enabled for traffic analysis and diagnostics ? Spanning Tree Protocols: Supports RSTP and MSTP for network loop prevention ? Quality of Service (QoS): Ensures traffic prioritization for critical applications ? Access Control Lists (ACL): Enhanced security with filtering and traffic control ? Equal-Cost Multipath (ECMP): Efficient path distribution for load balancing ? DHCP Protection: Prevents rogue DHCP servers from disrupting the network #### Compliance and Standards ? Meets a wide range of standards: IEEE 802.3, IEEE 802.1Q, IEEE 802.1P, and many more ? Fully compliant with industry-leading protocols for seamless integration ### Memory and Storage ? RAM: 4GB DRAM for optimal performance ? Flash Memory: 1GB storage for configurations and updates #### Expansion and Connectivity ? Interfaces: 48 x Ethernet Ports 6 x 100G QSFP28 Ports 1 x Serial (RJ-45) Console 1 x Management LAN (RJ-45) 1 x USB 2.0 Port ? 48 x Ethernet Ports ? 6 x 100G QSFP28 Ports ? 1 x Serial (RJ-45) Console ? 1 x Management LAN (RJ-45) ? 1 x USB 2.0 Port ### Power and Energy Efficiency ? Power Supply: Built-in internal power supply for reliable operation ## Part Number: JH391-61001 The HPE FlexFabric 5940 Network Switches are an exceptional choice for organizations seeking high-performance networking solutions. One of the standout features of these switches is their part number, specifically the JH391-61001. In this section, we will delve into the benefits and importance of this unique identifier for users. ### Identification and Compatibility The part number serves as a unique identifier for the HPE FlexFabric 5940 Network Switches. It allows users to easily identify and differentiate this specific model from other switches in the market. Moreover, the JH391-61001 part number ensures compatibility with other networking equipment, ensuring seamless integration and interoperability within existing infrastructures. ### Efficient Maintenance and Support Having a specific part number like JH391-61001 simplifies maintenance and support processes. When troubleshooting or reporting issues to technical support, referencing the part number streamlines communication and ensures that the appropriate resources are allocated to resolve any problems efficiently. ### Upgrades and Expansion The JH391-61001 part number also plays a crucial role in upgrades and expansion plans. By identifying the specific model, organizations can accurately determine if additional switches with the same part number are compatible and can be seamlessly integrated into their network architecture. This flexibility allows for scalability without disrupting existing operations, providing a cost-effective solution for future growth. ### Warranty Coverage and Documentation Warranty coverage and documentation are essential factors to consider when investing in networking equipment. The HPE FlexFabric 5940 Network Switches with the JH391-61001 part number come with comprehensive warranty coverage tailored to this specific model. Users can have peace of mind knowing that they are protected against potential hardware failures or defects during the specified warranty period. Furthermore, documentation specific to this part number ensures that users have access to accurate and detailed information regarding installation, configuration, and troubleshooting. #### Conclusion In summary, the JH391-61001 part number of the HPE FlexFabric 5940 Network Switches offers various benefits and importance for users. It enables easy identification, compatibility, efficient maintenance and support, smooth upgrades and expansion, as well as warranty coverage and documentation specific to this model. By emphasizing this feature, HPE ensures that users can make informed decisions and leverage the full potential of their networking infrastructure. ## Ports: 48 x 10 Gigabit SFP+ When it comes to network switches, the number and type of ports play a crucial role in determining their functionality and versatility. The HPE FlexFabric 5940 Network Switches boast impressive 48 x 10 Gigabit SFP+ ports, providing users with exceptional connectivity options. In this section, we will explore the benefits and importance of this feature in detail. ### High-Speed Connectivity The 48 x 10 Gigabit SFP+ ports on the HPE FlexFabric 5940 Network Switches offer high-speed connectivity, enabling organizations to handle large amounts of data efficiently. Whether it's transmitting large files, streaming high-definition media, or supporting bandwidth-intensive applications, these switches ensure uninterrupted performance and smooth data flows. ### Flexibility and Scalability Having 48 ports provides organizations with ample room for expansion and flexibility in their network infrastructure. The HPE FlexFabric 5940 Network Switches allow businesses to connect multiple devices simultaneously without compromising performance. With the ability to accommodate a wide range of devices and configurations, these switches offer scalability for future growth and adaptability to changing network demands. ### Aggregation and Link Aggregation Control Protocol (LACP) The 48 x 10 Gigabit SFP+ ports enable aggregation capabilities, allowing users to combine multiple ports into a single logical connection. This feature, known as Link Aggregation Control Protocol (LACP), enhances network efficiency by aggregating bandwidth, improving overall performance, and providing redundancy. By utilizing multiple ports simultaneously, organizations can ensure high availability and maximize throughput. ### Virtualization and Network Segmentation Virtualization is a critical aspect of modern network infrastructures, and the 48 x 10 Gigabit SFP+ ports on the HPE FlexFabric 5940 Network Switches facilitate virtualization and network segmentation. With these switches, organizations can create virtual networks and isolate traffic for improved security, efficient resource allocation, and simplified management. This feature is particularly beneficial for cloud environments or environments with multiple departments or tenants. #### Conclusion The 48 x 10 Gigabit SFP+ ports on the HPE FlexFabric 5940 Network Switches offer high-speed connectivity, flexibility, scalability, aggregation capabilities through LACP, and support for virtualization and network segmentation. These features make these switches an excellent choice for organizations that require robust networking solutions capable of handling demanding workloads while providing room for growth and adaptability. ## Power Supply: Dual Redundant Hot-Swappable Power Supplies Power supply redundancy is a critical aspect of any network infrastructure to ensure uninterrupted operation and prevent downtime. The HPE FlexFabric 5940 Network Switches excel in this aspect with their dual redundant hot-swappable power supplies. In this section, we will explore the benefits and importance of this feature in detail. ### Enhanced Reliability The dual redundant hot-swappable power supplies of the HPE FlexFabric 5940 Network Switches significantly enhance reliability. By having two power supplies operating simultaneously, the switches can withstand a power supply failure without any interruption in service. This redundancy ensures continuous operation, even in the event of a power supply failure, minimizing downtime and maximizing productivity. ### Fault Tolerance The dual redundant power supplies provide fault tolerance, ensuring that the switches can continue operating even if one power supply fails. In mission-critical environments where network uptime is of utmost importance, having a backup power supply is crucial to maintain uninterrupted connectivity. The hot-swappable feature allows for easy replacement of a faulty power supply without the need to power down the switches, further minimizing downtime. ### Load Balancing The dual redundant power supplies on the HPE FlexFabric 5940 Network Switches also enable load balancing. With two power supplies operating simultaneously, the load is distributed evenly between them, reducing strain and preventing the overloading of a single power supply. Load balancing optimizes performance and ensures that each power supply operates within its specified capacity, prolonging its lifespan and enhancing overall efficiency. ### Scalability and Future-Proofing The inclusion of dual redundant hot-swappable power supplies in the HPE FlexFabric 5940 Network Switches offers scalability and future-proofing. As organizations grow and their network requirements increase, additional switches can be seamlessly integrated into the existing infrastructure without worrying about power limitations. The dual redundant power supplies provide the necessary power capacity to accommodate expanding networks, ensuring that users can scale their infrastructure without disruptions. #### Conclusion The dual redundant hot-swappable power supplies of the HPE FlexFabric 5940 Network Switches enhance reliability, provide fault tolerance, enable load balancing, and offer scalability and future-proofing capabilities. These features make these switches ideal for organizations that prioritize uninterrupted operations and require a resilient network infrastructure capable of handling growth and fluctuations in demand. ## Throughput: 1.44 Tbps Throughput is a crucial factor to consider when selecting network switches, as it determines the maximum data transfer rate and overall performance. The HPE FlexFabric 5940 Network Switches excel in this aspect with their impressive throughput of 1.44 Tbps. In this section, we will explore the benefits and importance of this feature in detail. ### High-Speed Data Transfer The 1.44 Tbps throughput of the HPE FlexFabric 5940 Network Switches ensures high-speed data transfer, allowing organizations to handle large volumes of data efficiently. Whether it's transferring files, streaming media, or supporting bandwidth-intensive applications, these switches can accommodate demanding workloads without compromising performance. High throughput translates to reduced latency and improved responsiveness, enhancing user experience and productivity. ### Support for Bandwidth-Intensive Applications Bandwidth-intensive applications, such as video conferencing, virtualization, or data analytics, require significant network resources to function optimally. The 1.44 Tbps throughput of the HPE FlexFabric 5940 Network Switches ensures that these applications have the necessary bandwidth to operate smoothly. Users can rely on these switches to deliver consistent performance, even under heavy loads, without sacrificing quality or experiencing bottlenecks. ### Scalability and Future-Proofing With a throughput of 1.44 Tbps, the HPE FlexFabric 5940 Network Switches offer scalability and future-proofing capabilities. As organizations grow and their network requirements increase, these switches can accommodate higher data transfer rates without compromising performance. The high throughput ensures that users can scale their infrastructure and support additional devices or applications without experiencing degradation in network performance. ### Efficient Resource Utilization The high throughput of the HPE FlexFabric 5940 Network Switches enables efficient resource utilization. By providing ample bandwidth, these switches prevent congestion and allow network resources to be allocated optimally. This feature is particularly beneficial in environments where multiple devices or applications compete for network resources. With high throughput, organizations can ensure that each device or application receives the necessary bandwidth to operate at peak performance. #### Conclusion The 1.44 Tbps throughput of the HPE FlexFabric 5940 Network Switches ensures high-speed data transfer, supports bandwidth-intensive applications, offers scalability and future-proofing capabilities, and enables efficient resource utilization. These features make these switches an excellent choice for organizations that require exceptional performance and reliability in their network infrastructure. ## Form Factor: Rack-Mountable The form factor of a network switch determines its physical size and mounting options, which are crucial considerations when planning the deployment of networking equipment. The HPE FlexFabric 5940 Network Switches feature a rack-mountable form factor, offering several benefits and importance for users. In this section, we will explore this feature in detail. ### Space Efficiency The rack-mountable form factor of the HPE FlexFabric 5940 Network Switches ensures space efficiency. These switches can be easily mounted in standard server racks, taking advantage of vertical space that would otherwise be underutilized. By utilizing rack space efficiently, organizations can optimize their infrastructure footprint and maximize the number of networking devices they can accommodate within a limited space. ### Centralized Management Rack-mountable switches enable centralized management by consolidating networking equipment in a single location. This ease of management simplifies cable management, reduces clutter, and improves overall organization. Administrators can easily access and maintain the switches without having to navigate through multiple locations, minimizing downtime and streamlining troubleshooting processes. ### Scalability and Expansion The rack-mountable form factor provides scalability and expansion capabilities. As organizations grow and their networking requirements increase, additional switches can be seamlessly added to the existing rack infrastructure. This flexibility allows for easy expansion without the need for extensive reconfiguration or adjustments to the physical layout. The rack-mountable form factor ensures that organizations can scale their network infrastructure efficiently to support future growth. ### Physical Security Rack-mounted switches offer enhanced physical security. By being housed within server racks, these switches are protected from unauthorized access and tampering. Physical security measures, such as locked server room doors or surveillance systems, can be implemented to provide an additional layer of protection. This feature is particularly crucial in environments where data privacy and network security are paramount. #### Conclusion The rack-mountable form factor of the HPE FlexFabric 5940 Network Switches ensures space efficiency, centralized management, scalability, and expansion capabilities, as well as enhanced physical security. These features make these switches an excellent choice for organizations looking to optimize their infrastructure footprint, simplify management processes, accommodate growth, and protect their network equipment from unauthorized access.JH391A HPE FlexFabric 5940 48xGT 6QSFP28 Network Switches
£7,006.49£8,407.79 Incl. VAT
## Product Details The HPE JH391A Flexfabric 5940 is an advanced managed switch designed for high-performance networking, featuring: ### Device Specifications ? Type: Managed Switch ? Port Count: 48 Ports (L3) ? Form Factor: Rack-Mountable, 1U ? Stackable: Yes ### Connectivity Options ? Ports: 48 x 10/100/1000/10000 Mbps 6 x 100 Gigabit Qsfp28 ? 48 x 10/100/1000/10000 Mbps ? 6 x 100 Gigabit Qsfp28 ### Performance Metrics ? Routing/Switching Capacity: 2160 Gbps ? Latency (10 Gbps): Less than 1 ?s #### Capacity Insights ? IPv4 Routing Table: 120,000 Entries ? IPv6 Routing Table: 60,000 Entries ? MAC Address Table Size: 288,000 Entries ### Advanced Features ? Jumbo Frame Support: Yes ? Routing Protocols: OSPF BGP-4 IS-IS RIP (v1 & v2) IGMP VRRP Static IPv6 Routing BGP-4+ MPLS Bidirectional Forwarding Detection (BFD) ? OSPF ? BGP-4 ? IS-IS ? RIP (v1 & v2) ? IGMP ? VRRP ? Static IPv6 Routing ? BGP-4+ ? MPLS ? Bidirectional Forwarding Detection (BFD) ? Remote Management: SNMP (v1, v2c, v3) RMON Telnet SSH-2 CLI Access ? SNMP (v1, v2c, v3) ? RMON ? Telnet ? SSH-2 ? CLI Access ### Operational Features ? Flow Control ? DHCP Support ? Port Mirroring ? IPv6 Compatibility ? Weighted Fair Queuing (WFQ) ? Rapid Spanning Tree Protocol (RSTP) ? Multiple Spanning Tree Protocol (MSTP) ? Access Control List (ACL) Capabilities ? Quality of Service (QoS) Management ? Device Link Detection Protocol (DLDP) ? Equal-Cost Multipath (ECMP) ? LLDP Support ? DHCP Protection ? Registered State Change Notification (RSCN) ? Strict Priority (SP) ? Edge Virtual Bridging (EVB) ? Intelligent Resilient Framework (IRF) ? Reverse Airflow Support ? In-Service Software Upgrade (ISSU) ? IP Source Guard ? VXLAN Tunnel Endpoints (VTEP) Support ### Compliance Standards ? IEEE 802.3 ? IEEE 802.1D ? IEEE 802.1Q ? IEEE 802.1P ? IEEE 802.3X ? IEEE 802.3AD (LACP) ? IEEE 802.1W ? IEEE 802.1X ? IEEE 802.3AE ? IEEE 802.1S ? IEEE 802.1AD ? IEEE 802.3AH ? IEEE 802.1AG ? IEEE 802.1AX ? IEEE 802.1QAZ ? IEEE 802.3AG #### Memory Specifications ? RAM: 4 GB DRAM ? Flash Memory: 1 GB ### Expansion and Connectivity #### Available Interfaces ? 48 x 10G Ports ? 6 x 100G LAN Qsfp28 Ports ? 1 x Serial (Console) RJ-45 ? 1 x Management (LAN) RJ-45 ? 1 x USB 2.0 Port ## Number Of Ports The HPE FlexFabric 5940 Network Switches are equipped with an impressive 48 ports, making them an excellent choice for businesses and organizations that require a high number of connections. With such a large number of ports, these switches offer unparalleled flexibility and scalability, allowing users to easily connect multiple devices and expand their network as needed. ### Increased Connectivity The 48 ports on the HPE FlexFabric 5940 Network Switches provide users with a wide range of connectivity options. Whether you need to connect servers, storage devices, or other networking equipment, these switches have you covered. The abundance of ports ensures that you can easily accommodate all your devices without the need for additional switches or complicated configurations. #### Efficient Network Design Having 48 ports available on a single switch simplifies network design and reduces complexity. With fewer switches required, you can save space in your server room or data center. Additionally, having all your devices connected to a single switch improves management and troubleshooting capabilities, as it is easier to identify and resolve issues when everything is centralized. ##### Scalability The HPE FlexFabric 5940 Network Switches' 48 ports provide room for growth and future expansion. As your business evolves and your network requirements increase, these switches can accommodate additional devices without the need for major infrastructure changes. This scalability ensures that your network can keep up with your organization's growing demands. ## Port Types The HPE FlexFabric 5940 Network Switches support both 10 Gigabit Ethernet and 40 Gigabit Ethernet port types. This versatile capability offers users the flexibility to connect devices with different bandwidth requirements while maintaining high performance. ### High-Speed Connectivity With support for both 10 Gigabit Ethernet and 40 Gigabit Ethernet, the HPE FlexFabric 5940 Network Switches enable blazing-fast data transfer rates. This high-speed connectivity is essential for bandwidth-intensive applications, such as video streaming, large file transfers, and data backups. By utilizing these advanced port types, users can ensure smooth and uninterrupted network performance. #### Future-Proofing The inclusion of 10 Gigabit Ethernet and 40 Gigabit Ethernet ports future-proofs your network infrastructure. As technology continues to advance, the demand for higher bandwidth will only increase. By investing in switches with these port types, you can be confident that your network will be able to handle the demands of tomorrow's applications and services. ##### Flexibility The ability to support both 10 Gigabit Ethernet and 40 Gigabit Ethernet ports gives users the flexibility to connect devices with different bandwidth requirements. Whether you need to connect servers, storage systems, or high-performance workstations, these switches can accommodate a wide range of devices without compromising performance. ## Form Factor The HPE FlexFabric 5940 Network Switches feature a rack-mountable form factor, making them ideal for organizations that require space-efficient network solutions. ### Space Optimization Rack-mountable switches are designed to be installed in standard server racks, allowing for efficient use of limited space in server rooms or data centers. By mounting the HPE FlexFabric 5940 Network Switches in a rack, you can free up valuable floor space and ensure a clean and organized network infrastructure. #### Ease of Installation The rack-mountable form factor simplifies the installation process. These switches are designed to fit seamlessly into standard racks, eliminating the need for additional mounting hardware or complex configurations. This ease of installation saves time and effort, allowing you to quickly deploy and integrate the switches into your existing network infrastructure. ##### Improved Airflow and Cooling Rack-mountable switches are designed to optimize airflow and cooling. When installed in a rack, these switches benefit from the rack's ventilation system, ensuring efficient heat dissipation and preventing overheating. This improved airflow and cooling capability contribute to the overall reliability and longevity of the switches. ## Power Supply The HPE FlexFabric 5940 Network Switches feature an internal power supply, providing users with a reliable and convenient power source. ### Reliability Internal power supplies offer increased reliability compared to external power adapters or redundant power supplies. By having the power supply built directly into the switch, there is a reduced risk of power failure or connectivity issues caused by loose or damaged power connections. This reliability is crucial for businesses that rely on uninterrupted network connectivity. #### Convenience With an internal power supply, users don't have to worry about managing external power adapters or dealing with tangled cables. The integrated design simplifies cable management and reduces clutter, contributing to a cleaner and more organized network environment. Additionally, the internal power supply eliminates the need for additional power outlets, making installation and setup more convenient. ##### Cost Savings An internal power supply can result in cost savings over time. By eliminating the need for external power adapters, you can reduce the number of components that need to be purchased, managed, and maintained. This streamlined approach not only saves money but also reduces the environmental footprint by minimizing electronic waste. ## Management Interface The HPE FlexFabric 5940 Network Switches offer a variety of management interfaces, including CLI (Command Line Interface), SNMP (Simple Network Management Protocol), and web-based management. This comprehensive management interface allows users to easily configure and monitor their network infrastructure. ### Flexibility in Configuration The CLI provides advanced users with a powerful and flexible way to configure and manage network settings. With a command-based interface, users can execute complex commands and scripts to customize their network configurations according to their specific requirements. This flexibility is particularly beneficial for organizations with advanced networking needs or those that require fine-grained control over their network settings. #### Centralized Monitoring SNMP allows for centralized monitoring of network devices, providing administrators with real-time visibility into the health and performance of their network infrastructure. By utilizing SNMP management tools, administrators can proactively detect and resolve issues, ensuring optimal network performance and minimizing downtime. ##### User-Friendly Interface The web-based management interface offers a user-friendly graphical user interface (GUI) that simplifies the configuration and monitoring process. This intuitive interface is accessible through a web browser, making it easy for users of all experience levels to manage the switches. The GUI provides a visual representation of the network topology, allowing users to quickly identify and troubleshoot issues. ## Layer Supported The HPE FlexFabric 5940 Network Switches support Layer 3 functionality, offering advanced routing capabilities for more complex network environments. ### Network Segmentation Layer 3 switches enable network segmentation by creating multiple virtual LANs (VLANs). This segmentation allows for better network organization and improved security by isolating different departments or user groups. By separating traffic into VLANs, administrators can control access and implement security policies more effectively, reducing the risk of unauthorized access or malicious activity. #### Enhanced Routing Layer 3 switches provide advanced routing capabilities, allowing for efficient traffic routing between different subnets or networks. This enhanced routing functionality is particularly useful in large-scale networks with multiple interconnected subnets or when implementing complex routing protocols. With Layer 3 support, the HPE FlexFabric 5940 Network Switches can effectively handle the routing needs of demanding network environments. ##### Improved Network Performance Layer 3 switches offer improved network performance compared to Layer 2 switches. By performing routing functions at the switch level, Layer 3 switches can offload some of the routing tasks from the core routers, reducing network congestion and improving overall performance. This improved network performance translates into faster data transfer rates and better user experience. ## Switching Capacity The HPE FlexFabric 5940 Network Switches boast an impressive switching capacity of 2.88 Tbps, ensuring high-speed and efficient data transfer throughout your network. ### Scalability With a switching capacity of 2.88 Tbps, these switches can handle high volumes of data traffic without performance degradation. This scalability is essential for businesses that anticipate future growth or have demanding network requirements. The ample switching capacity ensures that your network can accommodate increasing data loads and maintain optimal performance. #### Seamless Data Transfer The high switching capacity of the HPE FlexFabric 5940 Network Switches enables seamless data transfer between connected devices. Whether you are transferring large files, streaming high-definition media, or running resource-intensive applications, these switches can handle the data transfer demands without bottlenecks or latency issues. This smooth and uninterrupted data transfer is crucial for maintaining productivity and efficiency. ##### Redundancy and Resilience The generous switching capacity of these switches allows for redundancy and resilience in network design. By distributing traffic across multiple paths, administrators can create redundant connections that ensure data continuity even in the event of a link failure. This redundancy improves network reliability and minimizes the risk of downtime, ensuring uninterrupted access to critical resources. ## Forwarding Rate The HPE FlexFabric 5940 Network Switches offer an impressive forwarding rate of 2142 Mpps (Million Packets Per Second), guaranteeing efficient data forwarding and processing. ### Fast Data Forwarding The high forwarding rate of 2142 Mpps ensures that data packets are efficiently processed and forwarded through the network. This fast data forwarding capability is particularly important in high-traffic environments where a delay in packet processing can lead to performance degradation or bottlenecks. With the HPE FlexFabric 5940 Network Switches, you can be confident that your network will handle demanding workloads with ease. #### Reduced Latency Low latency is crucial for real-time applications, such as voice and video conferencing or online gaming. The impressive forwarding rate of these switches minimizes packet processing delays, resulting in reduced latency and improved responsiveness. This low latency ensures a smooth and lag-free experience for users, enhancing productivity and user satisfaction. ##### Improved Workload Distribution The high forwarding rate allows for efficient workload distribution across multiple devices or servers. By evenly distributing incoming data packets, these switches prevent any single device from becoming overwhelmed with traffic, ensuring balanced utilization of network resources. This workload distribution optimizes network performance and prevents congestion, resulting in a more stable and reliable network environment. ## Buffer Size The HPE FlexFabric 5940 Network Switches are equipped with a generous buffer size of 16 MB, facilitating efficient packet handling and minimizing packet loss. ### Packet Handling Efficiency The ample buffer size of 16 MB allows these switches to efficiently handle incoming packets, especially during periods of high network activity. The buffer acts as temporary storage for incoming data packets, ensuring that no packets are lost due to congestion or overwhelmed network resources. This efficient packet handling improves overall network performance and minimizes the risk of data loss. #### Preventing Packet Loss Packet loss can significantly impact network performance and user experience. The generous buffer size of the HPE FlexFabric 5940 Network Switches helps prevent packet loss by absorbing temporary bursts of data traffic and allowing for smooth data flow. By minimizing packet loss, these switches maintain data integrity and ensure reliable communication between devices. ##### Quality of Service (QoS) The buffer size plays a crucial role in supporting Quality of Service (QoS) features. QoS allows administrators to prioritize certain types of network traffic, ensuring that critical applications or services receive the necessary bandwidth and resources. The buffer size of these switches enables effective QoS implementation by providing the necessary buffer space to handle prioritized traffic and prevent congestion. This QoS capability enhances network performance and guarantees a consistent user experience for critical applications. ## Weight The HPE FlexFabric 5940 Network Switches weight 23.59 lbs, making them suitable for various installation scenarios. ### Portability Despite their robust capabilities, these switches are relatively lightweight, making them easier to handle and transport compared to heavier equipment. This portability is beneficial for organizations that require flexibility in their network infrastructure or need to relocate equipment frequently. The manageable weight ensures easy installation and maintenance without straining personnel or requiring specialized lifting equipment. #### Mounting Flexibility The weight of the switches allows for flexible mounting options. Whether you need to install them in a standard server rack or mount them on a wall, their manageable weight simplifies the installation process. This flexibility ensures that you can adapt the switches to fit your specific infrastructure requirements without compromising stability or safety. ##### Space Efficiency The weight of the HPE FlexFabric 5940 Network Switches contributes to their space efficiency. With a lightweight design, these switches take up minimal space in server racks or data center cabinets. This space efficiency allows for better utilization of limited space, whether you have a small server room or a large-scale data center. By optimizing space usage, you can maximize the capacity and scalability of your network infrastructure. ## Dimensions The HPE FlexFabric 5940 Network Switches have dimensions of 17.3 x 16.9 x 1.7 inches, providing a compact and space-efficient form factor. ### Space Optimization With their compact dimensions, these switches take up minimal space in server racks or cabinets. This space optimization allows for better utilization of limited physical space, making them an excellent choice for organizations with constrained server rooms or data centers. Whether you have a small office or a large-scale enterprise environment, the compact form factor ensures efficient use of available space. #### Easy Integration The compact dimensions of the HPE FlexFabric 5940 Network Switches facilitate easy integration into existing network infrastructures. They can fit seamlessly into standard server racks or cabinets without requiring additional modifications or specialized installation procedures. This ease of integration saves time and effort, allowing for quick deployment and seamless integration with your network environment. ##### Aesthetically Pleasing The compact dimensions contribute to the overall aesthetic appeal of the switches. With their sleek and modern design, they blend seamlessly into any environment, whether it's a professional office setting or a state-of-the-art data center. The aesthetically pleasing appearance ensures that your network infrastructure looks clean, organized, and professional.JH394A HPE FlexFabric 5940 48XGT 6QSFP+ Switch.
£733.77£880.52 Incl. VAT
## Product Details ### HPE JH394A Flexfabric 5940 Switch Designed to provide exceptional network performance, the HPE JH394A Flexfabric 5940 Switch features 48 high-speed ports and advanced management capabilities. This versatile 1U rack-mountable device offers superior routing and switching functionality for your data center or enterprise network. #### Key Specifications ? Device Type: Managed Layer 3 Switch with 48 Ports ? Enclosure Type: Rack-mountable (1U) ? Networking Subtype: 40 Gigabit Ethernet ? Ports: 48 x 10/100/1000/10000 Ethernet, 6 x 40 Gigabit QSFP+ ? Performance: Routing/switching capacity of 1440 Gbps, throughput of 1071 Mpps ? Latency: Less than 1 ?s at 10 Gbps ? Remote Management Protocol: Telnet, CLI ? RAM: 4 GB SDRAM ? Flash Memory: 1 GB #### Advanced Features ? Resilient Framework: Intelligent Resilient Framework (IRF) technology ensures superior network resilience. ? Management: SNMP support for simplified network monitoring and management. ? Expansion and Connectivity: Offers versatile expansion options with 48 Ethernet ports, 6 QSFP+ ports, and additional interfaces for serial and USB connections. ### Expansion and Connectivity ? Ethernet Ports: 48 x 10/100/1000/10000 Gigabit Ethernet ? 40G Ports: 6 x 40G QSFP+ LAN ? Additional Interfaces: 1 x Serial RJ-45, 1 x Management LAN RJ-45, 1 x USB 2.0 #### Power and Efficiency ? Power Supply: Internal power supply for stable operation ##### Performance and Scalability The HPE Flexfabric 5940 Switch ensures high performance with a robust routing and switching capacity. This device is engineered for businesses requiring top-tier scalability and high-speed data processing across large networks. ##### Management and Control Designed with advanced management tools, including CLI and Telnet access, this switch allows for comprehensive remote control and monitoring, ensuring seamless network operation and minimal downtime. ## Sku: JH394A The HPE FlexFabric 5940 48XGT 6QSFP+ Switch is an advanced networking solution designed to meet the demands of modern data centers. One of its standout features is the Sku, with the specific model number being JH394A. In this section, we will explore the benefits and importance of this feature for users. ### Enhanced Performance The Sku JH394A offers enhanced performance capabilities, ensuring that your network operates at optimal levels. With this switch, you can expect high-speed and reliable connectivity, enabling smooth data transmission and efficient communication between devices. The JH394A Sku is specifically tailored for high-performance networking environments, making it an ideal choice for businesses that require fast and uninterrupted data transfer. ### Scalability Another advantage of the JH394A Sku is its scalability. The HPE FlexFabric 5940 48XGT 6QSFP+ Switch can be easily scaled up or down according to your organization's evolving needs. Whether you are expanding your network or downsizing, this switch offers the flexibility to accommodate your changing requirements. This scalability ensures that you can future-proof your network infrastructure and adapt to technological advancements without significant disruptions or costly upgrades. ### Reliability and Redundancy The JH394A Sku provides a high level of reliability and redundancy. This feature is crucial in enterprise environments where network downtime can have severe consequences. With redundant power supplies and cooling fans, the HPE FlexFabric 5940 switch ensures that your network remains operational even in the event of hardware failures. This redundancy minimizes the risk of downtime and helps to maintain uninterrupted connectivity for critical business operations. ### Easy Management The JH394A Sku is designed with user-friendly management capabilities, simplifying network administration tasks. The HPE FlexFabric 5940 switch comes with a comprehensive management interface that allows you to monitor and control your network effectively. From configuring VLANs to implementing Quality of Service (QoS) policies, the intuitive management features of this switch make it easy for network administrators to optimize performance and ensure smooth operation. ### Cost-Effective Solution Investing in the JH394A Sku of the HPE FlexFabric 5940 switch offers a cost-effective solution for your networking needs. This switch provides advanced features and performance at a competitive price point, making it an attractive option for businesses looking to maximize their return on investment. With its scalability and reliability, the JH394A Sku ensures that you can meet your current networking requirements without overpaying for unnecessary features or sacrificing performance. ## Ports: 48 The number of ports is a crucial consideration when selecting a network switch, and the HPE FlexFabric 5940 48XGT 6QSFP+ Switch boasts 48 ports. In this section, we will delve into the benefits and importance of this feature for users. ### Increased Connectivity With 48 ports, the HPE FlexFabric 5940 switch allows for increased connectivity options. This is particularly valuable in environments where numerous devices need to be connected to the network simultaneously. Whether it's servers, workstations, or other network devices, having ample ports ensures that you can accommodate all your networking needs without running out of available connections. ### Flexibility and Expandability The 48 ports on the HPE FlexFabric 5940 switch offer flexibility and expandability for your network infrastructure. You can easily connect multiple devices without the need for additional switches or complex configurations. This flexibility allows you to adapt your network as your organization grows or as new devices are added, saving both time and resources. The expandability of the switch ensures that your network can keep up with the ever-increasing demands of data-intensive applications and technologies. ### Improved Network Performance The 48 ports on the HPE FlexFabric 5940 switch contribute to improved network performance. With more ports available, you can distribute network traffic evenly, preventing bottlenecks and congestion. This helps to maintain a high level of performance, ensuring that your network operates efficiently even during peak usage periods. By minimizing network congestion, the switch allows for faster data transfer and reduced latency, resulting in enhanced user experience and increased productivity. ### Consolidation and Simplified Management Having 48 ports on a single switch allows for consolidation and simplified management of your network infrastructure. Instead of deploying multiple switches to accommodate all your devices, you can centralize your network connections using the HPE FlexFabric 5940 switch. This consolidation not only reduces the complexity of your network but also simplifies the management and troubleshooting process. With fewer devices to monitor and manage, network administrators can save time and effort, leading to increased operational efficiency. ### Cost Savings The 48 ports on the HPE FlexFabric 5940 switch offer cost savings compared to deploying multiple switches. By consolidating your network connections onto a single switch, you can reduce hardware costs and minimize ongoing maintenance expenses. Additionally, having fewer switches simplifies cable management, reducing the need for excessive cabling and associated costs. The cost savings associated with the 48 ports make the HPE FlexFabric 5940 switch an economically viable solution for businesses of all sizes. ## Port Type: 10 Gigabit Ethernet The HPE FlexFabric 5940 48XGT 6QSFP+ Switch is equipped with ports that support 10 Gigabit Ethernet, offering high-speed connectivity for your network. In this section, we will explore the benefits and importance of this feature for users. ### Enhanced Data Transfer Speed The 10 Gigabit Ethernet port type on the HPE FlexFabric 5940 switch delivers enhanced data transfer speeds compared to traditional Gigabit Ethernet connections. This high-speed connectivity enables faster file transfers, quicker access to network resources, and seamless communication between devices. Whether you are transferring large files, streaming multimedia content, or running bandwidth-intensive applications, the 10 Gigabit Ethernet ports ensure that your network can handle the increased data traffic with ease. ### Improved Network Performance By leveraging 10 Gigabit Ethernet ports, the HPE FlexFabric 5940 switch significantly improves network performance. The higher bandwidth capacity of these ports allows for greater data throughput, reducing latency and enhancing overall network responsiveness. This improved network performance translates into faster application response times, increased productivity, and a better user experience. Whether you are running demanding applications or supporting a large number of users, the 10 Gigabit Ethernet ports ensure that your network can handle the workload without compromising performance. ### Future-Proofing Investing in a switch with 10 Gigabit Ethernet ports offers future-proofing capabilities for your network infrastructure. As technology continues to advance, the demand for higher bandwidth increases. By adopting a switch with 10 Gigabit Ethernet support, you can ensure that your network is prepared for future growth and evolving requirements. This future-proofing capability eliminates the need for premature hardware upgrades and allows your organization to leverage emerging technologies without major disruptions or costly investments. ### Compatibility The 10 Gigabit Ethernet port type on the HPE FlexFabric 5940 switch is compatible with a wide range of devices and networking equipment. Whether you are connecting servers, storage devices, or workstations, the compatibility of these ports ensures seamless integration into your existing network infrastructure. This compatibility simplifies the deployment process and reduces the need for additional hardware or complex configurations, saving time and resources. ### Cost-Effective Solution Despite offering advanced features, the 10 Gigabit Ethernet port type on the HPE FlexFabric 5940 switch remains a cost-effective solution. The switch provides high-speed connectivity at a competitive price point, making it an attractive option for businesses looking to maximize their return on investment. By investing in a switch with 10 Gigabit Ethernet ports, you can enjoy the benefits of enhanced network performance without breaking the bank. ## Uplink Ports: 6 The HPE FlexFabric 5940 48XGT 6QSFP+ Switch features 6 uplink ports. In this section, we will discuss the benefits and importance of this feature for users. ### Increased Uplink Capacity With 6 uplink ports, the HPE FlexFabric 5940 switch provides increased uplink capacity. Uplink ports are essential for connecting switches to higher-level network devices or network aggregation points. Having more uplink ports allows for a greater number of connections to be established between switches, enabling efficient data transfer and improved network performance. The increased uplink capacity provided by the HPE FlexFabric 5940 switch ensures that your network can handle high traffic loads without experiencing bottlenecks or congestion. ### Redundancy and Resilience The 6 uplink ports on the HPE FlexFabric 5940 switch offer redundancy and resilience for your network infrastructure. Redundant uplink connections provide backup paths in case of link failures, ensuring uninterrupted connectivity and minimizing the risk of downtime. With multiple uplink ports available, the switch can automatically reroute traffic in the event of a link failure, maintaining seamless network operation. This redundancy and resilience are crucial for businesses that require high availability and reliability from their network infrastructure. ### Flexibility in Network Design The availability of 6 uplink ports on the HPE FlexFabric 5940 switch provides flexibility in network design. You can configure these ports to suit your specific requirements and adapt to your organization's evolving needs. Whether you need to establish connections to other switches, connect to a core network, or integrate with higher-level networking equipment, the flexibility offered by the uplink ports allows for versatile network design options. This flexibility ensures that your network can support diverse applications and accommodate future growth without compromising performance. ### Load Balancing The 6 uplink ports enable load balancing capabilities, distributing network traffic across multiple links for optimal performance. Load balancing helps to evenly distribute the workload across the uplink ports, preventing any single port from becoming overwhelmed with traffic. This distribution of traffic optimizes bandwidth utilization, reduces congestion, and ensures that no individual port becomes a bottleneck. By leveraging load balancing capabilities, the HPE FlexFabric 5940 switch delivers enhanced network performance and a seamless user experience. ### Scalability The 6 uplink ports on the HPE FlexFabric 5940 switch contribute to its scalability. These ports provide the flexibility to expand your network infrastructure as your organization grows or as new devices are added. You can easily connect additional switches or networking equipment to the uplink ports, expanding your network capacity without major disruptions or costly upgrades. This scalability ensures that your network can keep pace with changing business requirements and evolving technologies. ## Uplink Port Type: 40 Gigabit Ethernet The HPE FlexFabric 5940 48XGT 6QSFP+ Switch features uplink ports that support 40 Gigabit Ethernet connections. In this section, we will explore the benefits and importance of this feature for users. ### High-Speed Connectivity The 40 Gigabit Ethernet uplink ports on the HPE FlexFabric 5940 switch offer high-speed connectivity for your network. With 40 Gigabit Ethernet support, you can achieve significantly faster data transfer rates compared to traditional Gigabit Ethernet connections. This high-speed connectivity is particularly beneficial for data-intensive applications, such as large file transfers, data backups, and multimedia streaming. The 40 Gigabit Ethernet uplink ports ensure that your network can handle the increased bandwidth requirements of modern business applications. ### Increased Network Capacity The 40 Gigabit Ethernet uplink ports provide increased network capacity, allowing for higher data throughput and improved network performance. With the ability to transmit and receive data at 40 gigabits per second, these ports can handle substantial amounts of network traffic without experiencing congestion or slowdowns. This increased network capacity ensures that your network can support multiple users and demanding applications simultaneously, resulting in a smoother and more efficient user experience. ### Future-Proofing Investing in a switch with 40 Gigabit Ethernet uplink ports offers future-proofing capabilities for your network infrastructure. As technology continues to advance, the demand for higher bandwidth increases. By adopting a switch with 40 Gigabit Ethernet support, you can ensure that your network is prepared for future growth and evolving requirements. This future-proofing capability eliminates the need for premature hardware upgrades and allows your organization to leverage emerging technologies without major disruptions or costly investments. ### Flexibility in Network Design The availability of uplink ports supporting 40 Gigabit Ethernet connections provides flexibility in network design. You can configure these ports to suit your specific requirements and adapt to your organization's evolving needs. Whether you need to establish connections to other switches, connect to a core network, or integrate with higher-level networking equipment, the flexibility offered by the uplink ports allows for versatile network design options. This flexibility ensures that your network can support diverse applications and accommodate future growth without compromising performance. ### Compatibility The 40 Gigabit Ethernet uplink ports on the HPE FlexFabric 5940 switch are compatible with a wide range of devices and networking equipment. Whether you are connecting servers, storage devices, or workstations, the compatibility of these ports ensures seamless integration into your existing network infrastructure. This compatibility simplifies the deployment process and reduces the need for additional hardware or complex configurations, saving time and resources. ### Cost-Effective Solution Despite offering advanced features, the 40 Gigabit Ethernet uplink ports on the HPE FlexFabric 5940 switch remain a cost-effective solution. The switch provides high-speed connectivity at a competitive price point, making it an attractive option for businesses looking to maximize their return on investment. By investing in a switch with 40 Gigabit Ethernet uplink ports, you can enjoy the benefits of enhanced network performance without breaking the bank. ## Features: Layer 2 switching, Layer 3 routing, Quality of Service (QoS), Virtual LAN (VLAN) support, Spanning Tree Protocol (STP) support The HPE FlexFabric 5940 48XGT 6QSFP+ Switch comes packed with an array of features that enhance its functionality and performance. In this section, we will explore the benefits and importance of these features for users. ### Layer 2 Switching The Layer 2 switching capability of the HPE FlexFabric 5940 switch allows for efficient data transfer within a local area network (LAN). Layer 2 switching enables devices to communicate with each other by forwarding data packets based on their MAC addresses. This feature improves network performance, reduces latency, and enhances overall network efficiency. Whether you are transferring data between devices within the same VLAN or segmenting your network into multiple broadcast domains, the Layer 2 switching capability of the HPE FlexFabric 5940 switch ensures smooth and reliable connectivity. ### Layer 3 Routing The Layer 3 routing feature of the HPE FlexFabric 5940 switch allows for intelligent routing of network traffic between different subnets or VLANs. Layer 3 routing uses IP addresses to determine the optimal path for data packets to reach their destination. With Layer 3 routing capabilities, you can implement advanced network configurations, such as inter-VLAN routing, static routing, and dynamic routing protocols like OSPF or BGP. This feature enhances network scalability, improves performance, and enables efficient utilization of network resources. ### Quality of Service (QoS) The Quality of Service (QoS) feature of the HPE FlexFabric 5940 switch prioritizes network traffic based on predefined rules or policies. QoS ensures that critical applications or services receive the necessary bandwidth and resources to operate smoothly, even during times of high network congestion. By prioritizing traffic, QoS helps to minimize latency, reduce packet loss, and maintain consistent performance for time-sensitive applications like voice or video conferencing. The QoS feature of the HPE FlexFabric 5940 switch provides granular control over network traffic, ensuring that important business processes receive the necessary attention and resources. ### Virtual LAN (VLAN) Support The Virtual LAN (VLAN) support feature allows you to segment your network into multiple virtual LANs, improving security and network management. By creating separate VLANs, you can isolate different groups of devices or users, preventing unauthorized access to sensitive information and reducing the risk of network attacks. VLANs also streamline network management by providing logical grouping and simplifying the configuration of network policies. The VLAN support feature of the HPE FlexFabric 5940 switch offers a flexible and scalable solution for network segmentation, enhancing both
