My Cart (0 )
HP (643)
JL256A HPE 48G PoE+ 4SFP+ 48 Ports Managed Rack Mountable Switch
£2,036.36£2,443.63 Incl. VAT
## HPE 2930f 48G PoE+ 4SFP+ Switch Overview ### Product Specifications ? Device Type: Managed Switch with 48 Ports ? Enclosure: Rack-mountable, 1U ? Subtype: Gigabit Ethernet ### Port Configuration ? Ports: 48 x 10/100/1000 (PoE+) ? Uplink Ports: 4 x 1 Gigabit / 10 Gigabit SFP+ ### Power Over Ethernet The switch supports PoE+, allowing you to power devices through the Ethernet cables, thus reducing the need for additional power sources. ### Performance Metrics ? Throughput: 112 Mpps ? Switching Capacity: 176 Gbps ? Latency: 1 Gbps: 3.8 ?s 10 Gbps: 1.6 ?s ? 1 Gbps: 3.8 ?s ? 10 Gbps: 1.6 ?s ### Capacity and Limitations ? Jumbo Frame Size: 9220 bytes ? IPv4 Routing Table Entries: 10,000 ? IPv6 Routing Table Entries: 5,000 ? MAC Address Table Size: 32,000 Entries ### Supported Routing Protocols ? OSPF ? RIP (RIP-1, RIP-2) ? BGP ? IGMP Versions (v2, v3) ? Static IP Routing ? RIPng ? MLD ? CIDR ### Remote Management Capabilities ? Protocols: SNMP (Versions 1, 2, 2c, 3), RMON, Telnet, SSH (SSH-2) ? Management Interfaces: CLI, XRMON ### Security Features ? Encryption Algorithms: MD5, SSL ? Authentication Methods: RADIUS PAP CHAP TACACS (TACACS+) ? RADIUS ? PAP ? CHAP ? TACACS (TACACS+) ### Advanced Features ? Flow Control ? Full Duplex Support ? DHCP and BOOTP Support ? ARP Support ? VLAN Support ? IGMP Snooping ? Syslog Support ? DiffServ Support ? IPv6 Compatibility ? SNTP Support ? SFlow and STP Support ? Access Control List (ACL) Support ? Quality of Service (QoS) ? Dynamic VLAN Support (GVRP) ? Link Aggregation Control Protocol (LACP) ? Virtual Extensible LAN (VXLAN) ### Compliance and Standards ? IEEE 802.1d ? IEEE 802.1q ? IEEE 802.1p ? IEEE 802.3af ? IEEE 802.3x ? IEEE 802.3ad (LACP) ? IEEE 802.1w ? IEEE 802.1x ? IEEE 802.1s ? IEEE 802.1ad ? IEEE 802.1v ? IEEE 802.1ab (LLDP) ? IEEE 802.3at ? IEEE 802.3az ? IEEE 802.1ax ### Hardware Specifications ? Processor: ARM Cortex-A9, 1.016 GHz ? RAM: 1 GB DDR3 SDRAM ? Flash Memory: 4 GB ### Expansion and Connectivity Options ? Interfaces: 48 x 1000BASE-T RJ-45 (PoE+) 4 x Gigabit / 10Gbit LAN SFP+ 1 x Serial Console Port ? 48 x 1000BASE-T RJ-45 (PoE+) ? 4 x Gigabit / 10Gbit LAN SFP+ ? 1 x Serial Console Port ? Expansion Slots: 1 Total (1 Free) ? Maximum Installed Modules: 0 Installed / 4 Maximum ## Ports The HPE JL256A Managed Rack Mountable Switch is equipped with an impressive 48 ports. This abundance of ports offers users a wide range of benefits and plays a crucial role in enhancing network connectivity and performance. ### Increased Connectivity With 48 ports, users have the freedom to connect multiple devices simultaneously without worrying about running out of available ports. This is particularly advantageous for businesses or organizations that rely heavily on network infrastructure, such as data centers or large offices. The switch's plentiful ports ensure that every device can be connected efficiently and reliably. #### Scalability The large number of ports allows for easy scalability. As businesses grow and expand, they often need to accommodate additional devices and users. With the HPE JL256A, there is no need to invest in additional switches or complex network infrastructure. The switch's 48 ports provide the necessary flexibility to accommodate expanding networks without compromising on performance or reliability. #### Reduced Network Congestion Having a significant number of ports helps distribute network traffic evenly, reducing congestion and bottlenecks. This is especially important in high-demand environments where multiple devices are constantly transmitting data. With 48 ports at their disposal, users can enjoy smoother network performance and minimize the risk of slowdowns or interruptions. #### Versatile Deployment Options The HPE JL256A is rack mountable, allowing for easy integration into existing server racks or network cabinets. The switch's 48 ports offer flexibility in deployment options, making it suitable for various environments and setups. Whether it's a small office, a large enterprise, or a data center, the switch can adapt to different networking requirements effortlessly. ##### Cost Efficiency By providing 48 ports in a single switch, HPE eliminates the need for multiple switches and associated infrastructure. This not only simplifies network management but also reduces costs. Businesses can save on equipment expenses, maintenance, and power consumption by consolidating their networking needs into one powerful switch. ## POE+ The HPE JL256A Managed Rack Mountable Switch comes with Power over Ethernet Plus (POE+) capabilities. This feature offers users an array of benefits and is particularly valuable in environments where power outlets are limited or not easily accessible. ### Convenience and Flexibility POE+ eliminates the need for separate power sources for devices such as IP phones, wireless access points, or security cameras. With POE+, power and data transmission occur over a single Ethernet cable, simplifying installation and reducing cable clutter. This convenience allows for flexible device placement without the constraint of proximity to power outlets. #### Cost Savings POE+ enables cost savings by eliminating the need for additional electrical cabling and power outlets. This is especially beneficial in scenarios where devices are located in areas with limited access to power sources. With POE+, businesses can save on installation costs and reduce the overall complexity of their network infrastructure. #### Remote Power Management POE+ offers the capability to remotely manage and monitor power consumption of connected devices. This allows for proactive troubleshooting, power cycling, or even remotely turning off devices during non-operational hours to save energy. The ability to manage power remotely enhances network efficiency and provides greater control over energy consumption. #### Future-Proofing As technology evolves, the demand for higher power requirements grows. POE+ ensures that the HPE JL256A switch is ready to support future devices that may require more power. By investing in a switch with POE+ capabilities, users can future-proof their network infrastructure and avoid costly upgrades down the line. ## SFP+ One of the standout features of the HPE JL256A Managed Rack Mountable Switch is its support for four SFP+ (Small Form-factor Pluggable Plus) ports. These ports offer users a multitude of benefits, especially in high-performance networking environments. ### High-Speed Connectivity SFP+ ports provide blazing-fast data transmission rates, enabling ultra-high-speed connectivity between devices and the switch. With a data rate of up to 10 Gbps per port, users can enjoy reliable and low-latency connections for bandwidth-intensive applications or data-intensive tasks. This makes the HPE JL256A an ideal choice for demanding environments where speed is critical. #### Flexibility and Compatibility The SFP+ ports on the JL256A switch allow for the use of various SFP+ transceivers or modules, offering flexibility in network deployment. Users can choose the appropriate transceiver based on their specific networking needs, whether it's fiber optic or copper connections. This compatibility ensures seamless integration with existing network infrastructure and enables users to adapt to evolving technology requirements. #### Long-Distance Connectivity SFP+ ports support long-distance connectivity, making them suitable for scenarios where devices are located far apart. By utilizing fiber optic cables, users can achieve reliable connections over extended distances without compromising on performance or signal quality. This feature is particularly valuable in situations where Ethernet cables have distance limitations. #### Network Redundancy and Resilience The JL256A switch's SFP+ ports can be used for network redundancy and resilience purposes. Users can establish link aggregation groups (LAGs) by combining multiple SFP+ ports into a single logical interface. This configuration enhances network reliability by providing redundancy and load balancing across multiple links. In case of link failure, traffic seamlessly switches to an available link, ensuring uninterrupted connectivity. In conclusion, the HPE JL256A Managed Rack Mountable Switch offers a wealth of features and functionalities that cater to the diverse needs of users. Its 48 ports provide increased connectivity, scalability, reduced network congestion, versatile deployment options, and cost efficiency. The inclusion of POE+ enables convenience, cost savings, remote power management, and future-proofing. Finally, the four SFP+ ports deliver high-speed connectivity, flexibility, long-distance connectivity, and network redundancy. With these features, the HPE JL256A is a powerful networking solution suitable for a wide range of applications and environments.JH295A HPE Officeconnect 1950 12 4SFP 12 Ports Switch
£1,801.30£2,161.56 Incl. VAT
## HPE JH295A OfficeConnect 1950 Series 12-Port Network Switch ### Key Product Details ? Manufacturer: Hewlett Packard Enterprise (HPE) ? Model Number: JH295A ? Product Type: Network Switch ? Ports: 12 Ports ? Form Factor: Mountable, Rack-Mountable 1U ### Core Features and Specifications ? Enclosure Type: Desktop or 1U Rack-Mountable ? Switch Type: 10 Gigabit Ethernet ? Total Ports: 12 Ports ? Throughput: 238 Mpps (64-byte packet size) ? Routing/Switching Capacity: 320 Gbps ? Latency: 5 ?s (for both 100 Mbps and 1000BASE-T) #### Capacity Details ? IPv4 Routing Table: 512 entries ? IPv6 Routing Table: 256 entries ? MAC Address Table: 16,384 entries ? Jumbo Frame Support: Up to 10KB #### Remote Management Capabilities ? Supported Protocols: SNMP, RMON, HTTPS, CLI ##### Compliance with Industry Standards ? IEEE 802.3, IEEE 802.3i, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3az ### Expansion and Connectivity ? 12 x 10GBASE-T Ports: RJ-45 connectors ? 4 x Gigabit/10Gigabit LAN Ports: SFP+ connectors ? 1 x Console Port: RJ-45 ? 1 x Management Port: RJ-45 #### Power Specifications ? Internal Power Supply: Yes ? Power Capacity: 800 Watt ? Voltage Requirements: AC 120/230 V, 50/60 Hz ? Operational Power Consumption: 75 Watts ## Ports The HPE Officeconnect 1950 12 4SFP Switch is equipped with 12 ports, making it an ideal choice for small to medium-sized businesses that require a reliable and efficient network solution. These ports provide users with the ability to connect multiple devices to the switch, ensuring seamless connectivity and communication within the network. ### Increased Connectivity With 12 ports, the HPE Officeconnect 1950 12 4SFP Switch offers increased connectivity options for users. This allows businesses to connect a variety of devices such as computers, printers, servers, and other network-enabled devices to the switch, creating a robust and versatile network infrastructure. The availability of multiple ports ensures that users have ample room for expansion and can easily accommodate new devices as their business grows. #### Improved Network Performance Having 12 ports on the switch enables businesses to distribute network traffic evenly across multiple devices. This helps to prevent network congestion and ensures that each device connected to the switch receives optimal bandwidth and performance. By eliminating bottlenecks and optimizing network traffic flow, the HPE Officeconnect 1950 12 4SFP Switch enhances overall network performance, resulting in faster data transfer speeds and improved efficiency. ##### Flexibility and Versatility The 12 ports on the HPE Officeconnect 1950 12 4SFP Switch offer users flexibility and versatility in configuring their network infrastructure. Businesses can easily set up VLANs (Virtual Local Area Networks) to segment their network and improve security. Additionally, the switch supports advanced features such as link aggregation, which allows users to combine multiple ports for increased bandwidth and redundancy. This flexibility enables businesses to customize their network setup according to their specific requirements and ensures seamless integration with existing network infrastructure. ## Mountable One of the standout features of the HPE Officeconnect 1950 12 4SFP Switch is its mountable design. This feature allows users to conveniently mount the switch on a wall or in a rack, providing a space-saving and organized solution for network deployment. ### Space Efficiency The mountable design of the HPE Officeconnect 1950 12 4SFP Switch helps businesses optimize their workspace. By mounting the switch on a wall or rack, users can free up valuable desk or floor space that would otherwise be occupied by a standalone switch. This is particularly beneficial for small office environments or locations with limited space, where every square inch matters. #### Organized Network Deployment Mounting the HPE Officeconnect 1950 12 4SFP Switch ensures a neat and organized network deployment. With the switch securely mounted, cables can be neatly managed, reducing clutter and minimizing the risk of accidental disconnections. This organized setup not only improves the aesthetics of the workspace but also simplifies troubleshooting and maintenance, as each cable is easily identifiable and accessible. ##### Improved Cooling and Performance When the HPE Officeconnect 1950 12 4SFP Switch is mounted on a wall or rack, it benefits from improved airflow and cooling. The open design allows for better ventilation, preventing overheating and ensuring optimal performance of the switch. By maintaining appropriate operating temperatures, the switch can deliver consistent and reliable network connectivity without the risk of performance degradation or hardware failure. ## Product Code The HPE Officeconnect 1950 12 4SFP Switch is identified by its unique product code, JH295A. This code plays a crucial role in identifying, ordering, and managing the switch within a network infrastructure. ### Efficient Inventory Management The product code JH295A allows businesses to efficiently manage their inventory of HPE Officeconnect 1950 12 4SFP Switches. By using this code, IT administrators can easily identify and track the switch within their inventory system, simplifying the process of asset management. This ensures that businesses can accurately monitor the quantity and location of their switches, making it easier to plan for maintenance, upgrades, or replacements. #### Compatibility and Support The product code JH295A also plays a crucial role in ensuring compatibility and support for the HPE Officeconnect 1950 12 4SFP Switch. IT administrators can use this code to verify that the switch is compatible with their existing network infrastructure and meets their specific requirements. Additionally, when seeking technical support or warranty services, the product code helps streamline communication with HPE or authorized resellers, ensuring prompt and accurate assistance. ##### Future Expansion and Scalability The product code JH295A provides valuable information about the HPE Officeconnect 1950 12 4SFP Switch's specifications and capabilities. This information is crucial when planning for future expansion or scalability of the network infrastructure. Businesses can easily reference the product code to determine if additional switches are compatible with their existing setup or if they need to upgrade to a higher-capacity model. This foresight ensures that businesses can effectively scale their network infrastructure as their needs evolve, without any compatibility issues or disruptions.J9576A#ABB HP E3800 48 Port Switch 1G/10GBe 1000 4 Pt SFP
£454.55£545.46 Incl. VAT
## HP J9576A#ABB Key Specifications ### Manufacturer and Model ? Brand: HP ? Part Number: J9576A#ABB ? Type: Switch ### Device Overview ? Category: Networking ? Switch Type: 48-Port ? Functionality: L4 Managed Switch ? Mounting Style: Rack-Mountable, 1U ### Port and Performance Details ? Ports: 48 x 10/100/1000 Mbps + 4 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+ ? Performance Metrics: ? Throughput: 130.9 Million Packets Per Second (MPPS) ? Switching Capacity: 176 Gigabits Per Second (Gbps) ? Capacity Specifications: ? Routing Table Entries: 10,000 ? MAC Address Table Size: 65,500 Entries ? Jumbo Frame Support: Yes ### Routing and Management Protocols ? Supported Routing Protocols: ? OSPF, RIP-1, RIP-2, IGMP, VRRP, OSPFv2, PIM-SM, Static IP Routing, PIM-DM, OSPFv3, MLdv2, MLD ? Remote Management: ? SNMP v1, SNMP v2c, SNMP v3 ? RMON (1, 2, 3, 9) ? Telnet, HTTP, HTTPS ? CLI ? Encryption and Authentication: ? SSL Encryption ? Secure Shell (SSH), Radius, TACACS+ ? Secure Shell V.2 (SSH2) ### Hardware Specifications ? Processor: 2 Units ? Memory: ? 2 GB SDRAM ? 4 GB Flash Memory ### Connectivity Options ? Interfaces: ? 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ? 4 x 10GB Ethernet - SFP+ ? 1 x Console - RJ-45 - Management ? 1 x RJ-45 - Management ? Expansion Slot: 1 (Total) / 1 (Free) x Stacking Module Slot ### Power Specifications ? Power Device: Hot-Plug Power Supply ? Plug-In Module ? Installed Quantity: 1 (Installed) / 2 (Max) ? Power Redundancy: Optional ? Redundancy Scheme: 1+1 (With Optional Power Supply) ? Required Voltage: AC 120/230 V (50/60 Hz) ## Port Count: 48 ### Increased Connectivity and Flexibility The HP E3800 Switch is equipped with an impressive port count of 48, providing users with a high level of connectivity and flexibility. With this many ports, users can easily connect multiple devices to the switch, such as computers, printers, servers, and more. Whether you are setting up a small office network or a large enterprise system, having 48 ports at your disposal ensures that you have enough connectivity options to meet your needs. #### Efficient Network Expansion The 48-port count of the HP E3800 Switch allows for efficient network expansion. As your business grows and your network requirements increase, you can easily add new devices without worrying about running out of available ports. This scalability is essential for businesses that anticipate future growth and want to ensure that their network infrastructure can accommodate it. #### Redundancy and Failover Capabilities The high port count of the HP E3800 Switch also enables redundancy and failover capabilities. By connecting critical systems or devices to multiple ports on the switch, you can create redundant pathways for data transmission. In the event of a port failure, the switch automatically switches to an alternative path, ensuring uninterrupted network connectivity. This level of redundancy is crucial for businesses that rely on consistent network performance and cannot afford downtime. #### Streamlined Cable Management With 48 ports available, the HP E3800 Switch helps streamline cable management within your network infrastructure. Instead of having multiple switches scattered throughout your workspace, you can consolidate your devices and cables into a single switch. This not only makes it easier to manage and organize your network connections but also reduces clutter and improves overall aesthetics. ##### Improved Network Performance Having a large number of ports allows for better distribution of network traffic, resulting in improved network performance. With 48 ports, the HP E3800 Switch can handle higher volumes of data transmission without becoming overloaded. This is especially beneficial for bandwidth-intensive applications or environments where multiple users are simultaneously accessing network resources. By distributing the workload across multiple ports, the switch ensures that each device receives optimal network performance. ## Speed: 1G/10GBe ### Fast and Reliable Data Transfer The HP E3800 Switch offers impressive speed capabilities with its support for 1G and 10GBe connections. This means that users can enjoy fast and reliable data transfer rates, ensuring efficient communication between devices on the network. Whether you are transferring large files, streaming multimedia content, or running bandwidth-intensive applications, the high-speed capabilities of the switch guarantee a smooth and seamless user experience. #### Future-Proofing Your Network The 1G/10GBe speed of the HP E3800 Switch future-proofs your network infrastructure. As technology continues to advance and demand for higher network speeds increases, having a switch that supports 10GBe ensures that your network can keep up with evolving requirements. By investing in a switch with this level of speed, you can avoid the hassle and cost of upgrading your network infrastructure shortly. #### Enhanced Productivity With faster data transfer speeds, the HP E3800 Switch enhances productivity within your network environment. Users experience reduced latency and faster response times when accessing and transferring data. This is particularly advantageous in environments where time-sensitive tasks are common, such as video editing studios or online gaming centers. By minimizing delays and bottlenecks, the switch enables users to work more efficiently and complete tasks in less time. #### Support for High-Bandwidth Applications The 1G/10GBe speed of the HP E3800 Switch provides support for high-bandwidth applications. Whether you are streaming high-definition videos, hosting virtual machines, or running data-intensive applications, the switch ensures that your network can handle the demands of these resource-intensive tasks. This is crucial for businesses that rely on such applications for their day-to-day operations or for individuals who require a high-performance network for personal use. ##### Seamless Network Integration The high-speed capabilities of the HP E3800 Switch facilitate seamless integration into existing network infrastructures. Whether you have a mix of older devices with 1G capability or newer devices with 10GB capability, the switch can accommodate both. This versatility allows for a smooth transition to higher speeds without disrupting your current network setup. You can gradually upgrade your devices and take full advantage of the switch's speed capabilities at your own pace. ## Interface: SFP ### Flexible Connectivity Options The HP E3800 Switch features an interface that supports Small Form-Factor Pluggable (SFP) modules. This provides users with flexible connectivity options as SFP modules can be easily inserted and removed from the switch, allowing for quick and convenient changes to network configuration. Whether you need to connect via fiber optic cables or copper cables, the SFP interface enables you to choose the appropriate module for your specific connectivity needs. #### Long-Distance Connections The SFP interface of the HP E3800 Switch supports fiber optic SFP modules, enabling long-distance connections. This is particularly beneficial in scenarios where devices are located far apart or in different buildings. By utilizing fiber optic cables, you can establish stable and reliable connections over extended distances without experiencing signal degradation. This is essential for businesses that require seamless communication between geographically dispersed locations. #### Scalability and Modularity The SFP interface allows for scalability and modularity within your network infrastructure. SFP modules can be easily added or replaced as your connectivity requirements evolve. This flexibility enables you to customize your network setup to meet the specific needs of your business or organization. Whether you need to add more ports, switch between different types of cables, or upgrade to faster modules, the SFP interface simplifies the process and ensures compatibility. #### Reduced Cable Clutter By utilizing SFP modules, the HP E3800 Switch helps reduce cable clutter within your network environment. Compared to traditional Ethernet cables, fiber optic cables are thinner and more flexible, allowing for tidier cable management. Additionally, the modular nature of SFP interfaces eliminates the need for separate switches or devices for different types of connections. This consolidation not only saves space but also improves overall aesthetics and makes troubleshooting and maintenance easier. ##### Interoperability and Compatibility The SFP interface of the HP E3800 Switch ensures interoperability and compatibility with a wide range of networking equipment. SFP modules are standardized across various manufacturers, making it easy to find compatible modules from different vendors. This gives users the freedom to choose from a diverse selection of modules based on their specific requirements and budget. Additionally, the interface supports both single-mode and multi-mode fiber optic cables, further enhancing compatibility options. ## Part Number: J9576A#ABB ### Easy Identification and Ordering The HP E3800 Switch is assigned a unique part number, J9576A#ABB, which allows for easy identification and ordering. By referencing this part number when contacting suppliers or searching online, users can quickly locate the specific switch model they require. This simplifies the procurement process and ensures that you receive the exact product you need without confusion or delays. #### Access to Product-Specific Information The part number serves as a key to accessing detailed product-specific information. By searching for the part number on the manufacturer's website or other reliable sources, users can obtain comprehensive details about the HP E3800 Switch. This includes specifications, technical documentation, firmware updates, and compatibility information. Having access to this information is crucial for making informed decisions about network equipment and ensuring compatibility with existing infrastructure. #### Warranty and Support The part number is also essential for warranty and support purposes. When registering the HP E3800 Switch for warranty coverage or contacting technical support, the part number is required to identify the specific product model. This ensures that you receive the appropriate assistance and warranty coverage for your switch. By keeping track of the part number, you can easily access warranty information and take advantage of any available support options. #### Product Differentiation In a product lineup that may consist of multiple switch models, the part number helps differentiate the HP E3800 Switch from others. This is particularly useful when comparing specifications or pricing between different models. By referring to the part number, you can ensure that you are considering the correct switch model and accurately comparing its features and capabilities with other options in the market. ##### Standardized Naming Convention The use of part numbers, such as J9576A#ABB, follows a standardized naming convention established by the manufacturer. This convention ensures consistency across their product lineup and facilitates easy identification, even when dealing with multiple product variations or future releases. By adhering to this naming convention, users can navigate through different product offerings more efficiently and make informed decisions based on accurate product identification.JL169A HPE OfficeConnect SPF+ Managed Switch 6 Ports Rack-Mountable
£888.31£1,065.97 Incl. VAT
## HPE JL169A OfficeConnect 1850 ### Device Specifications #### Type of Device The HPE JL169A is a sophisticated managed switch designed for high-performance networking. #### Physical Design This versatile unit can be installed in various ways to fit your environment: ? Desktop installation ? Rack-mounted options ? Wall-mounted capability #### Port Configuration The switch features a total of 6 ports, designed to accommodate different networking needs: ? 6 x 1 Gigabit Ethernet ports ? 2 x 10 Gigabit Ethernet/SFP+ ports ### Performance Metrics #### Data Throughput and Capacity The HPE JL169A switch offers impressive performance specifications: ? Throughput: 119 million packets per second (Mpps) ? Switching capacity: 160 Gigabits per second (Gbps) ? Latency for 100 Mbps: 6.8 microseconds (?s) ? Latency for 1 Gbps: 2.9 microseconds (?s) ? Latency for 10 Gbps: 6.8 microseconds (?s) #### MAC Address Table The switch supports a MAC address table size of up to 16,000 entries, enabling efficient data flow management. #### Jumbo Frame Support The device can handle jumbo frames of up to 9,220 bytes, enhancing the transmission of large data packets. ### Management and Security Features #### Management Protocols Administrators can manage the switch remotely using various protocols: ? SNMP version 1 and 2c ? HTTPS #### Encryption Standards The switch employs SSL encryption to safeguard your network communications. ### Advanced Features #### Switching Capabilities This switch supports numerous advanced features that enhance network efficiency: ? Full duplex capability ? Layer 2 switching ? Auto-negotiation ? Auto-uplink (auto MDI/MDI-X) ? Port mirroring ? Quality of Service (QoS) ? DHCP server functionality ? 2MB packet buffer ? Network Time Protocol (NTP) #### Compliance Standards The switch adheres to multiple IEEE standards, ensuring compatibility and performance: ? IEEE 802.1Q ? IEEE 802.1P ? IEEE 802.3X ? IEEE 802.1W ? IEEE 802.3AT ? IEEE 802.3AZ ### Technical Specifications #### Processor and Memory The HPE JL169A is powered by: ? 1 x ARM Cortex-A9 processor at 600 MHz ? 128 MB DDR3 SDRAM memory ### Connectivity Options #### Interface Types The switch provides the following interface options: ? 6 x 1000BASE-T RJ-45 ports ? 2 x 10 Gigabit Ethernet/SFP+ RJ-45/SFP+ ports ### Power Requirements #### Power Supply The internal power supply operates efficiently under the following conditions: ? Voltage: AC 120/230V (50/60 Hz) ? Operational power consumption: 42.8 watts ## Ports The HPE OfficeConnect JL169A Managed Switch is equipped with 6 ports, making it an essential networking device for small to medium-sized businesses. These ports play a critical role in connecting various devices within a network, allowing for seamless communication and data transfer. ### Increased Connectivity With 6 ports, this managed switch offers increased connectivity options for users. Each port can be utilized to connect different devices such as computers, printers, servers, and IP phones. This enables businesses to expand their network infrastructure and accommodate more devices without the need for additional switches. #### Efficient Data Transfer The multiple ports of the HPE OfficeConnect JL169A Managed Switch ensure efficient data transfer within the network. With more ports available, users can distribute network traffic evenly, preventing congestion and ensuring smooth data transmission. This is particularly beneficial in environments where large amounts of data need to be transferred simultaneously. #### Versatile Network Configuration The 6 ports of this managed switch offer versatility in network configuration. Users have the flexibility to create VLANs (Virtual Local Area Networks) and assign specific ports to each VLAN. This allows for better network segmentation, enhanced security, and improved performance by isolating different departments or groups within the organization. ##### Seamless Collaboration The multiple ports of the HPE OfficeConnect JL169A Managed Switch promote seamless collaboration among team members. With each port connected to a device, employees can easily share files, access shared resources, and collaborate on projects without any network bottlenecks. This enhances productivity and streamlines workflow within the organization. ## Mounting Options The HPE OfficeConnect JL169A Managed Switch offers versatile mounting options, including rack-mountable and wall-mountable configurations. This feature provides users with flexibility in installing the switch according to their specific requirements and space availability. ### Space Optimization The rack-mountable design of the JL169A Managed Switch allows users to efficiently utilize space within their network racks. By mounting the switch on a standard rack, businesses can neatly organize their networking equipment, saving valuable floor or desk space. This is particularly advantageous in data centers or server rooms where optimal space utilization is crucial. #### Easy Installation The wall-mountable feature of this managed switch simplifies the installation process. Users can easily mount the switch on a wall using the provided brackets, eliminating the need for additional hardware or equipment. This is especially beneficial for small offices or locations with limited space, as it allows for quick and hassle-free deployment. #### Improved Accessibility The wall-mountable option enhances accessibility to the switch's ports and configuration interfaces. By mounting the switch at an easily reachable height, network administrators can conveniently connect and manage devices without having to bend down or strain themselves. This accessibility ensures efficient maintenance and troubleshooting, reducing downtime and improving overall network performance. ##### Flexible Deployment The availability of both rack-mountable and wall-mountable options offers flexible deployment scenarios for the HPE OfficeConnect JL169A Managed Switch. Users can choose the most suitable mounting option based on their infrastructure layout and specific needs. This flexibility ensures that the switch can be seamlessly integrated into different environments, ranging from small offices to large enterprise networks. In conclusion, the HPE OfficeConnect JL169A Managed Switch's 6 ports provide increased connectivity, efficient data transfer, versatile network configuration, and seamless collaboration. Additionally, its rack-mountable and wall-mountable options offer space optimization, easy installation, improved accessibility, and flexible deployment. These features make the JL169A Managed Switch an ideal choice for businesses seeking reliable networking solutions that can adapt to their evolving needs.JH295A#ABA HPE Officeconnect 4SFP 12 Ports Switch Mountable
£1,801.30£2,161.56 Incl. VAT
## HPE JH295A#ABA OfficeConnect 1950 12-Port Managed Switch ### Key Features of the HPE JH295A#ABA Network Switch ? Manufacturer: HPE (Hewlett Packard Enterprise) ? Product Type: Network Switch ? Model Number: JH295A#ABA ? Port Count: 12 Ports ? Enclosure: Desktop or Rack-Mountable 1U Form Factor ### Technical Specifications #### General Features ? Product Type: 10 Gigabit Ethernet Switch ? Total Ports: 12 Ports ? Networking Capacity: 320 Gbps Routing/Switching ? Packet Throughput: 238 Million Packets per Second (Mpps) at 64-Byte Packet Size ? Latency: 5 ?s for 100Mbps and 1000base-T #### Advanced Features ? IPv4 Routing Table: 512 Entries ? IPv6 Routing Table: 256 Entries ? MAC Address Table: Supports 16,384 Entries ? Jumbo Frame Support: Up to 10KB ? Remote Management: SNMP, RMON, HTTPS, CLI ? Compliant Standards: IEEE 802.3, IEEE 802.3i, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3az ### Expansion & Connectivity #### Network Interfaces ? Ports: 12 x 10GBase-T (RJ-45) ? Additional Interfaces: 4 x Gigabit/10Gbit LAN (SFP+), 1 x Console (RJ-45), 1 x Management Port (RJ-45) ### Power & Efficiency #### Power Details ? Power Supply: Internal Power Supply ? Power Rating: 800 Watts ? Voltage Requirements: AC 120/230 V, 50/60 Hz ? Operational Power Consumption: 75 Watts ##### Connectivity Options & Versatility ? Designed for flexible deployment in both desktop and rack environments ? Supports high-speed data transfers and reliable network performance ? Ideal for small to medium-sized business setups requiring robust networking ## Ports The HPE JH295A#ABA Switch comes equipped with an impressive 12 ports, making it an ideal choice for businesses of all sizes. These ports allow for seamless connectivity and efficient data transfer, ensuring that your network operates at its full potential. In this section, we will explore the benefits and importance of the 12 ports feature in detail. ### Increased Connectivity With 12 ports, the HPE JH295A#ABA Switch offers increased connectivity options for your network infrastructure. This means that you can connect multiple devices simultaneously, such as computers, servers, printers, and other network-enabled devices. The ability to connect more devices directly to the switch eliminates the need for additional networking equipment, simplifying your setup and reducing costs. #### Improved Bandwidth Each port on the HPE JH295A#ABA Switch provides a dedicated connection, ensuring that there is no competition for bandwidth among connected devices. This translates to improved performance and faster data transfer speeds. Whether you are transferring large files or streaming high-definition videos, the 12 ports feature guarantees a seamless experience without any lag or buffering issues. #### Flexibility and Scalability Having 12 ports gives you the flexibility to expand your network as your business grows. You can easily add new devices without worrying about running out of available ports. This scalability ensures that your network can adapt to changing business needs without requiring significant hardware upgrades or changes in infrastructure. #### Separate VLANs The HPE JH295A#ABA Switch allows you to create separate Virtual Local Area Networks (VLANs) using its 12 ports. VLANs enable you to segment your network into smaller, isolated networks for improved security and performance management. By grouping devices with similar security requirements or traffic patterns into separate VLANs, you can enhance network efficiency and reduce the risk of unauthorized access to sensitive data. #### Enhanced Network Performance The 12 ports feature of the HPE JH295A#ABA Switch plays a crucial role in enhancing overall network performance. With more ports available, the switch distributes network traffic evenly across devices, preventing congestion and minimizing packet loss. This ensures that your network operates smoothly, promoting productivity and reducing downtime. ## Mountable The HPE JH295A#ABA Switch is designed to be mountable, offering users a convenient and space-saving solution for their networking needs. In this section, we will explore the benefits and importance of the mountable feature in detail. ### Space Efficiency The mountable design of the HPE JH295A#ABA Switch allows you to free up valuable desk or floor space. By securely attaching the switch to a wall or rack, you can keep your workspace clutter-free and organized. This is especially beneficial for businesses with limited space or those looking to optimize their office layout. #### Improved Cable Management Mounting the HPE JH295A#ABA Switch provides an opportunity for better cable management. With a mounted switch, you can route cables neatly behind the device, keeping them organized and reducing the risk of accidental disconnections or damage. This not only improves aesthetics but also simplifies troubleshooting and maintenance tasks. #### Protection from Physical Damage Mounting the HPE JH295A#ABA Switch on a wall or rack offers an added layer of protection against physical damage. By keeping it elevated and out of reach, you minimize the risk of accidental bumps or spills that could potentially disrupt your network connectivity. This added durability ensures that your switch remains operational even in challenging environments. #### Improved Cooling Efficiency When mounted, the HPE JH295A#ABA Switch benefits from improved cooling efficiency. The elevated position allows for better airflow around the device, preventing overheating and extending its lifespan. This is particularly important for switches located in enclosed spaces or areas with limited ventilation. #### Easy Maintenance and Accessibility Mounting the HPE JH295A#ABA Switch makes it easily accessible for maintenance and troubleshooting purposes. Instead of searching for the switch among a tangle of cables, you can quickly locate it on the wall or rack. This saves time and effort, enabling efficient management of your network infrastructure. ## SFP Ports The HPE JH295A#ABA Switch features 4 SFP ports, making it a versatile choice for businesses that require high-speed connectivity and fiber-optic integration. In this section, we will explore the benefits and importance of the SFP ports feature in detail. ### Higher Bandwidth SFP (Small Form-factor Pluggable) ports offer higher bandwidth capabilities compared to traditional copper ports. With 4 SFP ports, the HPE JH295A#ABA Switch allows you to connect via fiber-optic cables, providing faster data transfer rates and increased network performance. This is especially beneficial for businesses that handle large amounts of data or require real-time communication. #### Longer Transmission Distance Fiber-optic cables used with SFP ports have a significantly longer transmission distance compared to copper cables. This makes them ideal for connecting devices located far apart or in different buildings within your network infrastructure. The 4 SFP ports feature of the HPE JH295A#ABA Switch ensures that you can establish reliable connections over extended distances without compromising signal quality. #### Improved Security SFP ports offer enhanced security features compared to copper ports. Fiber-optic cables used with SFP ports are difficult to tap into, providing an additional layer of protection against unauthorized access or data interception. By utilizing the 4 SFP ports on the HPE JH295A#ABA Switch, you can ensure that your network data remains secure, reducing the risk of potential breaches. #### Resistance to Interference Fiber-optic cables used with SFP ports are immune to electromagnetic interference, unlike copper cables. This resistance to interference ensures that your network signals remain stable and consistent, even in environments with high levels of electrical noise or radio frequency interference. By utilizing the 4 SFP ports, you can maintain reliable connections and minimize disruptions in your network performance. #### Future-Proofing The 4 SFP ports feature of the HPE JH295A#ABA Switch offers future-proofing capabilities for your network infrastructure. As technology advances, fiber-optic connectivity is becoming increasingly prevalent. By investing in a switch with SFP ports, you are ensuring that your network is ready to adapt to future requirements and take advantage of emerging technologies. In conclusion, the HPE JH295A#ABA Switch's 12 ports, mountable design, and 4 SFP ports provide users with numerous benefits and flexibility in their network setup. Whether it's increased connectivity options, space efficiency, higher bandwidth capabilities, or improved security, this switch caters to the diverse needs of businesses seeking reliable and efficient networking solutions.J9540A HP E5412-92G-PoE 4G-SFP V2 Zl Switch Chassis
£1,532.47£1,838.96 Incl. VAT
## Sku: J9540A ### Introduction The HP E5412-92G-PoE 4G-SFP V2 Zl Switch Chassis is a high-performance networking solution that offers exceptional power and flexibility. One of its standout features is its Sku, with the specific model being J9540A. In this section, we will delve into the benefits and importance of this particular Sku for users. Overview of HP J9540A Networking Switch ### General Specifications ? Brand: HP ? Model Number: J9540A ? Type: Networking Switch ? Port Configuration: 92 Ports ### Technical Details #### Enclosure and Mounting ? Enclosure Type: Rack-Mountable, 7U ? Advanced Switching Capability: Layer 4 ? Maximum Modules: 12 (4 Installed) #### Networking Features ? Number of Ports: 92 Ethernet Ports including 10 Base-T, 100 Base-Tx, and 1000 Base-T ? Data Link Protocols: Ethernet, Fast Ethernet, Gigabit Ethernet ? Routing Protocols: RIP-1, RIP-2, OSPFv2, Static IP Routing, IGMPv3, OSPFv3 ? Remote Management: RMON 2, Telnet, SNMP 3, HTTP, TFTP ? Connectivity: Wired ? Communication Modes: Half-Duplex, Full-Duplex ? Switching Protocol: Ethernet ### Power Specifications #### Power Over Ethernet ? Power Over Ethernet (PoE): Yes ? Power Supply: Internal Power Supply ? Installed Power Supplies: 2 (Up to 4) ? Required Voltage: AC 120/230V (50/60 Hz) ### Dimensions and Weight ? Width: 17.5 inches ? Depth: 14.4 inches ? Height: 17.8 inches ? Weight: 74.87 lbs ### Expansion and Connectivity #### Expansion Slots ? Total Expansion Slots: 12 (8 Free) ? SFP Slots: 4 (4 Free) #### Interfaces ? Network Interfaces: 92 x Ethernet Ports (10 Base-T/100 Base-Tx/1000 Base-T) ? RJ-45 ? Management Interface: 1 x RJ-45 ### High Performance and Scalability #### Enhanced Processing Power The J9540A Sku of the HP E5412-92G-PoE 4G-SFP V2 Zl Switch Chassis is equipped with advanced processing capabilities that ensure efficient data handling. With a powerful processor, this switch chassis can handle high volumes of network traffic without compromising performance. Users can expect enhanced productivity and reduced latency, even in demanding network environments. #### Scalable Design The J9540A Sku also provides users with a highly scalable networking solution. This switch chassis allows for easy expansion and integration of additional modules, enabling businesses to adapt to growing network requirements. Whether you need to connect more devices or increase bandwidth, the J9540A Sku ensures that your network can keep up with the evolving demands of your organization. ### Advanced Security Features #### Secure Access Control Network security is a critical concern for any organization. With the J9540A Sku, the HP E5412-92G-PoE 4G-SFP V2 Zl Switch Chassis offers advanced access control features that protect against unauthorized access and potential security breaches. The Sku includes robust authentication protocols, such as IEEE 802.1X, MAC authentication, and Web-based authentication, ensuring only authorized users can access the network. #### Threat Detection and Prevention The J9540A Sku is also equipped with advanced threat detection and prevention mechanisms. With features like Network Address Translation (NAT), IP Source Guard, and Dynamic Host Configuration Protocol (DHCP) protection, this Sku provides an extra layer of defense against potential threats. Users can rest assured that their network is secure from malicious activities, protecting sensitive data and preventing downtime. ### Reliability and Redundancy #### Redundant Power Supply The J9540A Sku of the HP E5412-92G-PoE 4G-SFP V2 Zl Switch Chassis offers a redundant power supply option. This feature ensures uninterrupted operation even in the event of a power failure or power supply malfunction. With redundant power supplies, businesses can minimize downtime and maintain network connectivity, critical for mission-critical applications and services. #### Hot-Swappable Modules The J9540A Sku supports hot-swappable modules, allowing users to replace or add modules without disrupting the entire network. This feature eliminates the need for downtime during maintenance or upgrades, ensuring continuous network availability. With hot-swappable modules, businesses can save time and resources while keeping their network up and running. ### Flexibility and Versatility #### Multiple Connectivity Options The J9540A Sku offers a wide range of connectivity options, including 92 Gigabit Ethernet ports and 4 SFP ports. This versatility allows businesses to connect a variety of devices, such as computers, servers, printers, and IP phones, all through a single switch chassis. The Sku also supports different types of network cables, including copper and fiber optic, providing flexibility in network design and implementation. #### Modular Design The J9540A Sku features a modular design that provides users with the flexibility to customize their network infrastructure according to their specific requirements. With modular expansion slots, users can easily add or remove modules based on their changing needs, without the need to replace the entire switch chassis. This scalability and flexibility make the J9540A Sku an ideal choice for businesses of all sizes. ##### Conclusion The J9540A Sku of the HP E5412-92G-PoE 4G-SFP V2 Zl Switch Chassis offers a wide range of benefits and features that cater to the needs of modern network environments. From its high-performance processing power to its advanced security features and flexible design, this Sku ensures reliable and efficient networking operations. Whether you're a small business or a large enterprise, the J9540A Sku empowers you to build a robust and secure network infrastructure that can grow and evolve with your organization.JG936A HPE 5130-24g-PoE 4 SFP+ Managed Switch 370w
£454.55£545.46 Incl. VAT
## Ports The HPE 5130-24g-PoE Managed Switch is equipped with a significant feature that sets it apart from other switches in its class - its 24 ports. These ports provide users with a reliable and efficient means of connecting various devices and expanding their network capabilities. In this section, we will explore the benefits and importance of this feature in detail. ### Enhanced Connectivity With 24 ports, this managed switch offers users the ability to connect a multitude of devices simultaneously. Whether you need to connect computers, printers, servers, or other networking equipment, the ample number of ports ensures that you have the flexibility to accommodate your specific needs. This enhanced connectivity allows for seamless communication and collaboration across your network, making it an ideal choice for small to medium-sized businesses. #### Scalability The 24 ports on the HPE 5130-24g-PoE Managed Switch also provide users with scalability options. As your business grows and your network requirements increase, having additional ports readily available allows for easy expansion without the need for additional switches or complex configurations. This scalability ensures that your network remains efficient and capable of handling future demands. #### Reduced Network Congestion One of the key advantages of having 24 ports is the ability to distribute network traffic evenly across multiple devices. This helps to prevent network congestion and bottlenecks, ensuring that data flows smoothly and efficiently between connected devices. By minimizing network congestion, you can maintain high-performance levels and deliver a seamless user experience. #### Flexible Deployment Options The HPE 5130-24g-PoE Managed Switch's 24 ports offer users a flexible deployment option. With a sufficient number of ports available, you can easily configure your network infrastructure according to your specific requirements. Whether you prefer a centralized or distributed network setup, the versatility provided by the 24 ports allows you to tailor your network to suit your needs. ##### Cost-Effectiveness Having 24 ports in a single managed switch eliminates the need for additional switches and reduces overall infrastructure costs. By consolidating your network equipment into one device, you can save on purchasing and maintenance expenses. Additionally, fewer devices mean reduced power consumption and rack space requirements, resulting in long-term cost savings. ##### Improved Network Performance The 24 ports on the HPE 5130-24g-PoE Managed Switch contribute to improved network performance. With more ports available, users can directly connect devices without relying on complex daisy-chaining configurations. This direct connection ensures faster data transfer rates and lower latency, resulting in enhanced network performance and productivity. ## Power In addition to its impressive port count, the HPE 5130-24g-PoE Managed Switch boasts a powerful PoE (Power over Ethernet) capability, providing users with a convenient and efficient power source for their devices. Let's delve into the benefits and importance of this feature. ### Efficient Power Distribution The PoE (370w) feature of the HPE 5130-24g-PoE Managed Switch allows for efficient power distribution to connected devices. With PoE capabilities, there is no need for separate power sources or individual power adapters for each device. This streamlined power delivery simplifies installation and reduces cable clutter, making it an ideal choice for environments with limited space or complex wiring requirements. #### Flexibility in Device Placement By utilizing PoE technology, the HPE 5130-24g-PoE Managed Switch offers users the flexibility to deploy devices in various locations without the restriction of nearby power outlets. This flexibility is particularly valuable in scenarios where devices need to be placed in areas that are difficult to access or lack power infrastructure. The PoE feature ensures that you can easily connect and power devices such as IP cameras, wireless access points, and VoIP phones wherever they are needed. #### Cost Savings Implementing the PoE (370w) capability of the HPE 5130-24g-PoE Managed Switch can result in significant cost savings. By eliminating the need for separate power adapters and reducing cable requirements, you can reduce upfront equipment costs. Furthermore, PoE technology allows for centralized power management, enabling efficient power usage monitoring and control. This level of control helps optimize energy consumption and lowers ongoing operational expenses. #### Improved Network Reliability The PoE feature of the HPE 5130-24g-PoE Managed Switch contributes to improved network reliability. By eliminating the reliance on individual power sources, potential points of failure are minimized. In the event of a power outage or fluctuation, the switch's PoE capabilities ensure that critical devices remain operational, reducing downtime and maintaining network continuity. ##### Future-Proofing Investing in a managed switch with PoE capabilities like the HPE 5130-24g-PoE ensures future-proofing your network infrastructure. As more devices become compatible with PoE, having a switch that can provide power becomes increasingly important. By choosing a switch with PoE capabilities, you can confidently accommodate new devices and technologies as they emerge, without the need for additional upgrades or replacements. ##### Easy Maintenance With centralized power management provided by the PoE feature, maintaining and troubleshooting your network becomes more streamlined. The HPE 5130-24g-PoE Managed Switch allows you to conveniently monitor power usage, identify potential issues, and remotely reset or power cycle devices when necessary. This ease of maintenance reduces the need for on-site visits and minimizes downtime, improving overall network management efficiency. ## SFP+ The HPE 5130-24g-PoE Managed Switch is equipped with four SFP+ ports, a feature that offers users enhanced network capabilities and connectivity options. Let's explore the benefits and importance of this feature in more detail. ### High-Speed Connectivity The four SFP+ ports on the HPE 5130-24g-PoE Managed Switch provide users with high-speed connectivity options. With support for 10 Gigabit Ethernet (10GbE) speeds, these ports allow for fast data transfer rates and low latency. This high-speed connectivity is particularly beneficial for bandwidth-intensive applications, such as video streaming, large file transfers, and data-intensive tasks, ensuring that your network can handle demanding workloads with ease. #### Aggregation and Link Aggregation Control Protocol (LACP) The SFP+ ports also offer users the ability to aggregate multiple ports together using Link Aggregation Control Protocol (LACP). By bundling multiple ports into a single logical link, you can increase overall bandwidth and improve network resilience. This aggregation capability allows for efficient load balancing across multiple links and provides redundancy in case of a link failure. With the HPE 5130-24g-PoE Managed Switch's SFP+ ports, you can create a robust and reliable network infrastructure. #### Long-Distance Connectivity SFP+ ports also provide long-distance connectivity options through the use of fiber optic cables. Fiber optic cables are capable of transmitting data over much greater distances compared to traditional copper cables. By leveraging the SFP+ ports on the HPE 5130-24g-PoE Managed Switch, users can establish connections across extended distances without compromising performance or reliability. This long-distance connectivity is particularly valuable in scenarios where devices are located far apart or when dealing with challenging physical environments. #### Versatile Network Expansion The four SFP+ ports on the HPE 5130-24g-PoE Managed Switch offer users versatile network expansion options. These ports are compatible with a wide range of Small Form-Factor Pluggable Plus (SFP+) transceivers, allowing you to connect to various network media types, including fiber optic and copper cables. This versatility enables users to easily integrate the switch into existing network infrastructures or expand their networks to meet changing requirements. ##### Future-Proof Investment Investing in a managed switch with SFP+ ports like the HPE 5130-24g-PoE ensures future-proofing your network infrastructure. As network speeds continue to increase and demands for higher bandwidth grow, having the ability to support 10GbE connections becomes crucial. By choosing a switch with SFP+ ports, you can accommodate future network upgrades and expansions without requiring a complete infrastructure overhaul. ##### Flexibility in Network Design The SFP+ ports on the HPE 5130-24g-PoE Managed Switch provide users with flexibility in network design. By utilizing fiber optic cables, you can establish connections over longer distances and overcome physical limitations. This flexibility allows for greater freedom in determining the layout and configuration of your network, optimizing performance and meeting specific business requirements. ## Part Number The part number of the HPE 5130-24g-PoE Managed Switch is JG936A, a unique identifier that distinguishes this particular model from other switches. Let's explore the benefits and importance of this feature in more detail. ### Product Identification The part number, JG936A, serves as a unique identifier for the HPE 5130-24g-PoE Managed Switch. It ensures that users can easily identify and differentiate this specific model from other switches in the market. This identification is crucial for accurate inventory management, efficient troubleshooting, and streamlined procurement processes. #### Compatibility and Interchangeability The part number plays a vital role in ensuring compatibility and interchangeability of components within the HPE product ecosystem. By using the correct part number, users can confidently select and integrate the HPE 5130-24g-PoE Managed Switch into their existing network infrastructure or expand their networks with compatible HPE products. This compatibility ensures seamless integration and allows for efficient and cost-effective network expansion. #### Warranty and Support The part number is also essential for warranty and support purposes. When registering or seeking technical assistance for the HPE 5130-24g-PoE Managed Switch, providing the correct part number allows HPE support personnel to quickly identify the product and provide accurate assistance. Additionally, warranty coverage is often tied to specific part numbers, ensuring that users receive the appropriate support and service for their specific model. #### Documentation and Resources The part number serves as a reference point for accessing relevant documentation and resources related to the HPE 5130-24g-PoE Managed Switch. By using the correct part number, users can easily locate product manuals, configuration guides, firmware updates, and other valuable resources provided by HPE. These resources are vital for proper installation, configuration, maintenance, and troubleshooting of the switch. ##### Product Lifecycle Management The part number plays a crucial role in product lifecycle management. As technology evolves and new models are introduced to the market, having a unique identifier like JG936A allows HPE and users to track the lifecycle of the HPE 5130-24g-PoE Managed Switch accurately. This information enables users to make informed decisions regarding product upgrades, replacements, and maintenance, ensuring that their network remains up-to-date and secure. ##### Ordering and Procurement The part number simplifies the ordering and procurement process for the HPE 5130-24g-PoE Managed Switch. By providing the correct part number to vendors or resellers, users can ensure that they receive the exact model they require without any confusion or miscommunication. This streamlined procurement process saves time and reduces the risk of ordering incorrect or incompatible products.J9822A HPE 5412r Zl2 SSL Gigabit Ethernet Managed Switch Rack Mountable
£646.75£776.10 Incl. VAT
## Series: 5412r Zl2 ### Powerful and Scalable Networking Solution The HPE J9822A Rack Mountable Gigabit Ethernet Managed Switch is part of the 5412r Zl2 series, which is renowned for its powerful and scalable networking capabilities. This series is designed to meet the demands of modern enterprises, offering advanced features and high-performance switching to ensure a seamless and efficient network infrastructure. ## Overview of the J9822A Switch ### Device Specifications Type: Managed Network Switch Mounting Option: 7U Rack-Mountable Ethernet Type: Gigabit ### Performance Metrics ? Throughput: 785.7 Million Packets Per Second (Mpps) ? Routing and Switching Capacity: 1 Terabit Per Second (Tbps) ### Capacity Details ? IPv4 Routing Table: 10,000 Entries ? IPv6 Routing Table: 5,000 Entries ? MAC Address Table: 64,000 Entries ### Supported Routing Protocols ? OSPF, RIP-1, RIP-2 ? BGP, IGMP, VRRP ? OSPFv2, PIM-SM, PIM-DM ? IGMPv3, OSPFv3, Static IPv6 Routing ? MLDv2, MLD, CIDR ### Remote Management Capabilities ? SNMP v1, v2c, v3 ? RMON v1, v2 ? Telnet, HTTP, TFTP ? SSH, CLI, XRMON ### Advanced Features ? Flow Control, DHCP, and BOOTP Support ? ARP Support, VLAN, and Trunking Capabilities ? Auto-Uplink (Auto MDI/MDI-X), Diffserv Support ? IPv6 Compatibility, Full and Half Duplex Modes ? SNTP Support, RSTP, MSTP, Tunneling ? Access Control Lists (ACLs), Quality of Service (QoS) ? MLD Snooping, Non-Stop Routing (NSR), Bandwidth Control ? STP Root Guard, UDLD, Rapid Per-VLAN Spanning Tree Plus (PVRST+) ? IPv4 Support, DHCP Relay, Port Security ? Fan Tray, Energy Efficient Ethernet, Dynamic ARP Protection ? DHCP Protection, Dual Firmware Images, Class of Service (CoS) ? SFlow v5, GARP VLAN Registration Protocol (GVRP), Type of Service (ToS) ### Compliance and Standards ? IEEE 802.3, 802.3u, 802.1d, 802.1q ? IEEE 802.3ab, 802.1p, 802.3af, 802.3x ? IEEE 802.3ad (LACP), 802.1w, 802.1x ? IEEE 802.1s, 802.1ad, 802.1v ? IEEE 802.1ab (LLDP), 802.3at, 802.3az ? IEEE 802.1ax ### Power Specifications ? Voltage: AC 120/230 V (50/60 Hz) ? Redundancy: Optional ? Power Supply Slots: 4 ? Minimum Power Supplies Required: 2 (Ordered Separately) #### Flexibility and Expandability One of the key benefits of the 5412r Zl2 series is its flexibility and expandability. With this switch, users can easily scale their network as their business grows. The switch supports a wide range of modules and expansion options, allowing for easy integration with existing infrastructure and future expansion needs. This flexibility ensures that businesses can adapt their network to meet changing requirements without the need for a complete overhaul. #### High Performance and Reliability The 5412r Zl2 series is built to deliver exceptional performance and reliability. Equipped with advanced hardware and software features, this switch can handle high-bandwidth applications and data-intensive tasks with ease. It boasts a non-blocking architecture, ensuring that data flows smoothly without any bottlenecks or performance issues. This high-performance capability is crucial for businesses that rely on uninterrupted network connectivity to support critical operations. #### Advanced Security Features Security is a top priority for any network infrastructure, and the 5412r Zl2 series excels in this aspect. It offers a comprehensive set of advanced security features to protect the network from unauthorized access, data breaches, and other potential threats. These features include Access Control Lists (ACLs), Secure Shell (SSH) encryption, and Virtual Local Area Networks (VLANs). By implementing these security measures, businesses can safeguard their sensitive data and ensure the integrity of their network. #### Simplified Network Management Managing a complex network can be a challenging task, but the 5412r Zl2 series simplifies this process with its intuitive and user-friendly management interface. The switch provides centralized management capabilities, allowing administrators to easily configure and monitor the network from a single interface. This streamlines network administration reduces the risk of human errors and saves valuable time and resources. ##### Scalability for Future Technologies In today's rapidly evolving technology landscape, businesses must have a network infrastructure that can support future technologies. The 5412r Zl2 series is designed with scalability in mind, ensuring that it can accommodate emerging technologies and evolving business needs. Whether it's the implementation of Internet of Things (IoT) devices, cloud computing, or virtualization, this switch provides the necessary foundation for seamless integration and optimal performance. ##### Cost-Effective Solution Investing in a networking solution is a significant decision for any business, and cost-effectiveness is always a key consideration. The 5412r Zl2 series offers excellent value for money, providing a robust and feature-rich solution at an affordable price point. By choosing this series, businesses can achieve high-performance networking without breaking the bank. Additionally, its scalability ensures that businesses can avoid unnecessary expenses by easily expanding their network as needed. ## Secure Communication SSL (Secure Sockets Layer) is a crucial feature offered by the HPE J9822A Rack Mountable Gigabit Ethernet Managed Switch. It enables secure communication between devices by encrypting data transmitted over the network. This feature plays a vital role in protecting sensitive information and ensuring the privacy and integrity of data transfers. #### Data Encryption One of the primary benefits of SSL is its ability to encrypt data. When data is transmitted over an SSL-enabled network, it is encrypted using complex algorithms that render it unreadable to unauthorized parties. This encryption provides a secure tunnel for data transmission, protecting it from interception and unauthorized access. By implementing SSL, businesses can ensure that their confidential information remains confidential, minimizing the risk of data breaches and unauthorized data manipulation. #### Authentication and Trust SSL also facilitates authentication and trust between devices on the network. It enables the use of digital certificates, which are cryptographic credentials that verify the identity of a device or entity. These certificates are issued by trusted Certificate Authorities (CAs) and provide a level of assurance that the device or entity is genuine and trustworthy. By using SSL certificates, businesses can establish secure connections with trusted devices and mitigate the risk of malicious entities infiltrating the network. #### Compliance with Industry Standards In today's regulatory landscape, compliance with industry standards is essential for businesses across various sectors. SSL is widely recognized as a secure communication protocol and is often a requirement for compliance with industry regulations such as the Payment Card Industry Data Security Standard (PCI DSS) and the Health Insurance Portability and Accountability Act (HIPAA). By incorporating SSL into their network infrastructure, businesses can ensure that they meet these regulatory requirements and avoid potential penalties or legal issues. ##### Protection Against Man-in-the-Middle Attacks SSL provides robust protection against Man-in-the-Middle (MitM) attacks, which are a common threat in network communication. In a MitM attack, an attacker intercepts communication between two parties, allowing them to eavesdrop on sensitive information or manipulate the data being transmitted. SSL prevents MitM attacks by encrypting data and using digital certificates for authentication. By utilizing SSL, businesses can significantly reduce the risk of falling victim to these types of attacks and safeguard the integrity and confidentiality of their data. ##### Enhanced Customer Trust For businesses that engage in e-commerce or handle sensitive customer information, SSL is crucial for building customer trust. When customers visit a website or interact with an application that uses SSL, they can see visual cues such as a padlock icon or a green address bar, indicating that the connection is secure. This visual confirmation instills confidence in customers that their data is protected, encouraging them to engage in online transactions and share their personal information. By implementing SSL, businesses can enhance customer trust and loyalty, ultimately leading to increased conversions and revenue. In conclusion, the HPE J9822A Rack Mountable Gigabit Ethernet Managed Switch, with its 5412r Zl2 series and SSL feature, offers significant benefits and importance for users. The 5412r Zl2 series provides a powerful and scalable networking solution with flexibility, high performance, advanced security features, simplified network management, scalability for future technologies, and cost-effectiveness. The SSL feature ensures secure communication through data encryption, authentication and trust, compliance with industry standards, protection against MitM attacks, and enhanced customer trust. With these features, users can have confidence in the reliability, security, and efficiency of their network infrastructure.JL003A HPE Aruba 5406R 44GT PoE+ Switch
£838.96£1,006.75 Incl. VAT
## Comprehensive Managed 44-Port Switch for Maximum Performance The HPE JL003A 5406r v3 zl2 Switch is designed to deliver exceptional managed switching for large-scale networks, featuring 44 ports and the ability to mount within a rack setup. This device provides versatile connectivity and is ideal for network expansion with its robust capacity. ### Device Specifications ? Device Type: Managed Switch - 44 Ports ? Enclosure: Rack-mountable, 4U size for compact integration ? Subtype: Gigabit Ethernet for high-speed networking ? Port Configuration: 44 x 10/100/1000 Mbps PoE+ ports 4 x 1G/10G SFP+ uplink ports ? 44 x 10/100/1000 Mbps PoE+ ports ? 4 x 1G/10G SFP+ uplink ports ### Enhanced Power Over Ethernet (PoE+) Capabilities This switch supports Power over Ethernet Plus (PoE+), providing power and data over a single cable for devices such as IP cameras, VoIP phones, and wireless access points. This feature simplifies installation and reduces cabling costs in large deployments. #### Superior Performance & Throughput ? Routing/ Switching Capacity: 960 Gbps ? Throughput: Up to 571.4 Mpps (Million packets per second) ? Switching Fabric Bandwidth: 1015 Gbps #### Expanded Network Capacity ? IPv4 Routing Table Entries: Supports up to 10,000 entries ? IPv6 Routing Table Entries: Accommodates up to 5,000 entries ? MAC Address Table: Stores up to 64K MAC addresses for extensive network mapping ### Advanced Layer 3 Routing and Protocol Support The HPE JL003A 5406r is equipped with advanced routing protocols to handle dynamic routing, including RIP-1, RIP-2, OSPFv2/v3, BGP, and static routing for both IPv4 and IPv6, offering comprehensive support for large and complex networks. #### Supported Routing Protocols: ? RIP-1, RIP-2 ? BGP, IGMP, VRRP ? OSPFv2, OSPFv3, PIM-SM, PIM-DM ? Static IP and IPv6 routing ? MLDv2 for multicast routing #### Remote Management & Security Protocols With multiple management protocols such as SNMP (v1, v2c, v3), Telnet, HTTP, and secure options like SSHv2, the switch offers flexibility and control from remote locations. It also integrates encryption through SSL and supports various authentication methods, including RADIUS, TACACS+, and EAP. ##### Remote Management Features: ? SNMP (v1, v2c, v3) ? RMON (1, 2, 3, 9) ? Telnet, HTTP, and TFTP support ? CLI (Command Line Interface) access ## Scalable Connectivity with Expansion Slots This switch offers scalability through its six expansion slots, four of which are free for further upgrades. The 8 additional SFP+ ports allow for high-speed uplink connections, ensuring flexibility in network expansion. ### Expansion Capabilities: ? Expansion Slots: 6 total slots (4 free for future upgrades) ? SD Memory Card Slot: 1 SD memory card slot for enhanced storage and configuration ? Installed Modules: 2 installed modules, expandable to 6 ### Robust Energy Efficiency and Security Features Energy-efficient Ethernet (EEE) and Dynamic ARP Protection ensure that the switch not only saves power but also maintains secure and reliable operations, even in large-scale deployments. Additional features such as DHCP protection, port security, and sFlow enhance network performance while keeping energy usage in check. #### Energy Efficiency & Security: ? Energy Efficient Ethernet (EEE) support ? Dynamic ARP Protection ? DHCP client and protection features ? Port security and access control list (ACL) support ? Support for sFlow v5 for advanced network monitoring ## Compliant Standards for Seamless Integration The HPE JL003A switch adheres to multiple industry standards such as IEEE 802.1q for VLAN tagging, 802.3af/at for PoE, 802.1d for STP, and many others. These standards ensure the switch integrates seamlessly into various network environments while offering enhanced features like trunking and VLAN support. ### Supported Standards: ? IEEE 802.1d (Spanning Tree Protocol) ? IEEE 802.1q (VLAN Tagging) ? IEEE 802.3af/802.3at (Power over Ethernet) ? IEEE 802.1x (Network Access Control) ? IEEE 802.3x (Flow Control) ? IEEE 802.1w, 802.1s, 802.1v for advanced spanning tree protocols #### Processing Power and Memory Powered by a 1.2 GHz Freescale P2020 processor and backed by 4 GB of DDR3 SDRAM, this switch is designed for high-performance network operations, ensuring smooth and efficient handling of complex tasks. ##### Hardware Specifications: ? Processor: Freescale P2020, 1.2 GHz ? RAM: 4 GB DDR3 SDRAM ? Flash Memory: 1 GB for configuration and firmware ## Power Supply & Expansion Flexibility The HPE JL003A 5406r v3 zl2 switch supports internal power supplies, although none are pre-installed. It can accommodate up to two power supplies for redundancy and uninterrupted operation. ### Power Configuration: ? Internal Power Supply Slots: 2 (maximum) ? Installed Power Supplies: None included (can install up to 2) ## Ports The HPE Aruba 5406R 44GT PoE+ and 4 Port SFP+ Rack Mountable Switch is equipped with an impressive array of ports, making it a versatile and powerful networking solution for businesses of all sizes. With a total of 44 Gigabit Ethernet ports and 4 SFP+ ports, this switch offers exceptional connectivity options that can meet the demands of even the most data-intensive applications. ### 44 Gigabit Ethernet Ports The 44 Gigabit Ethernet ports on the HPE Aruba 5406R switch provide high-speed connectivity for a wide range of devices. Whether you need to connect computers, printers, servers, or any other Ethernet-enabled device, these ports ensure a fast and reliable connection. With Gigabit speeds, you can transfer large files, stream high-definition media, and run bandwidth-intensive applications without experiencing any slowdowns or bottlenecks. #### Scalability and Flexibility Having 44 Gigabit Ethernet ports gives you the flexibility to expand your network as your business grows. You can easily connect multiple devices without the need for additional switches, simplifying your network infrastructure and reducing costs. Furthermore, these ports support advanced networking features such as link aggregation and VLANs (Virtual Local Area Networks), allowing you to optimize network performance and security. #### Improved Productivity The high-speed connectivity provided by the Gigabit Ethernet ports enhances productivity by ensuring that data can be transferred quickly and efficiently. This is particularly important in environments where large amounts of data need to be processed or shared on a regular basis. Employees can collaborate seamlessly, access resources faster, and complete tasks more efficiently with the reliable and fast connections provided by these ports. ##### Enhanced User Experience In today's digital age, users expect instant access to information and smooth online experiences. The 44 Gigabit Ethernet ports of the HPE Aruba 5406R switch contribute to an enhanced user experience by minimizing latency and facilitating faster data transfers. Whether it's a customer accessing your website or an employee working on critical projects, the improved network performance enables a seamless and responsive experience. ## Power Over Ethernet Power Over Ethernet (PoE) is a critical feature of the HPE Aruba 5406R switch, providing power and data connectivity to PoE-enabled devices over a single Ethernet cable. This feature eliminates the need for separate power supplies or outlets, simplifying installation and reducing costs. With the ability to deliver power to devices such as IP phones, wireless access points, and IP cameras, PoE offers numerous benefits for businesses. ### Simplified Deployment By incorporating PoE into the switch, the HPE Aruba 5406R eliminates the need for additional electrical wiring during deployment. This simplifies the installation process and reduces the overall cost of setting up a network. With PoE, you can easily deploy devices in locations where power outlets are not readily available, such as ceiling-mounted wireless access points or security cameras in remote areas. #### Flexibility and Mobility PoE provides flexibility and mobility by allowing devices to be placed in optimal locations without being limited by the availability of power outlets. This is especially beneficial for organizations that require a dynamic network infrastructure, such as retail stores or healthcare facilities. With PoE, you can easily relocate devices or add new ones without the hassle of rewiring or installing additional power sources. #### Centralized Power Management The HPE Aruba 5406R switch with PoE enables centralized power management, providing greater control and efficiency. Administrators can monitor and manage power consumption for individual ports or devices, ensuring that resources are allocated effectively. This not only helps in optimizing power usage but also reduces energy costs and contributes to a more environmentally-friendly network infrastructure. ##### Reliable Power Supply The HPE Aruba 5406R switch incorporates advanced PoE technology, ensuring a stable and reliable power supply to connected devices. It supports industry-standard PoE protocols such as IEEE 802.3af and IEEE 802.3at, delivering sufficient power to meet the requirements of various devices. With a reliable power supply, you can eliminate the risk of downtime or interrupted services due to power outages or fluctuations. ## Part Number The part number is an essential feature of any networking equipment as it uniquely identifies a specific model or variant. In the case of the HPE Aruba 5406R switch, its part number is JL003A. This alphanumeric code carries significant importance for users and plays a crucial role in various aspects of the product's lifecycle. ### Product Identification The part number, JL003A, serves as a means to identify the exact model of the HPE Aruba 5406R switch. This is particularly useful when purchasing or sourcing networking equipment, as it ensures that you are getting the specific model you require. By referencing the part number, you can avoid confusion or potential compatibility issues that may arise with similar but different models. #### Warranty and Support The part number also plays a vital role in warranty and support processes. When registering your HPE Aruba 5406R switch for service or support, providing the correct part number is crucial for ensuring accurate identification and documentation. This helps expedite any warranty claims or technical support requests you may have, ensuring a smooth and efficient resolution. #### Upgrades and Compatibility As technology advances, manufacturers release firmware updates and feature enhancements for their networking equipment. The part number, JL003A, is essential when checking for available updates specifically designed for the HPE Aruba 5406R switch. By referencing the part number, you can ensure that any upgrades or updates you apply are compatible with your specific model, maximizing its performance and functionality. ##### Documentation and Manuals The part number serves as a reference point when accessing documentation and manuals related to the HPE Aruba 5406R switch. Whether you need to consult the user manual, installation guide, or any other technical documentation, knowing the part number ensures that you are accessing the correct resources for your specific model. This helps in troubleshooting, configuration, and general maintenance of the switch.
