## Ports The HPE JG926A Ethernet Network Switch is equipped with 24 ports, making it an ideal choice for small to medium-sized businesses that require a reliable and efficient network infrastructure. These ports provide the necessary connectivity for various devices, such as computers, printers, servers, and network storage devices. ## Product Information: HPE JG926A ### Manufacturer Details ? Brand: HPE ? Part Number: JG926A ? Product Type: Networking Switch ### Technical Specifications ? Enclosure Type: Desktop or Rack-Mountable (1U) ? Switch Type: 24-Port ? Interface Type: Gigabit Ethernet Ports Configuration: ? 24 x 10/100/1000 (PoE+) ? 4 x Gigabit SFP #### Power Over Ethernet (PoE) ? PoE Standard: PoE+ ? PoE Budget: 370 W #### Performance Metrics ? Throughput: Up to 41.7 Mpps ? Routing/Switching Capacity: 56 Gbps ? IPv4 Routing Table Entries: 32 ? IPv6 Routing Table Entries: 32 ? MAC Address Table Size: 8192 Entries ? Jumbo Frame Support: Up to 10KB #### Routing and Management ? Routing Protocols: Static IPv4 and IPv6 Routing ? Remote Management Protocols: SNMP v1, SNMP v2c, SNMP v3, RMON 1, 2, 3, 9, Telnet, HTTP, HTTPS, TFTP, CLI ? Encryption: SSL ? Authentication: Secure Shell (SSH), RADIUS ### Advanced Features ? Flow Control ? Layer 2 Switching ? Auto-Negotiation ? ARP Support ? VLAN Support ? Auto-Uplink (Auto MDI/MDI-X) ? IGMP Snooping ? Syslog Support ? Port Mirroring ? Weighted Round Robin (WRR) Queuing ? IPv6 Support ? Spanning Tree Protocol (STP) Support ? Rapid Spanning Tree Protocol (RSTP) Support ? Multiple Spanning Tree Protocol (MSTP) Support ? Access Control List (ACL) Support ? Quality of Service (QoS) ? Jumbo Frames Support ? MLD Snooping ? Cable Diagnostics Function ? STP Root Guard ? DHCP Relay ? Port Security ? DHCP Client ? Dual Firmware Images ? Strict Priority Queuing (SPQ) ? Port Isolation ? Static Routing ? Class of Service (CoS) ? Single IP Management (SIM) ### Compliance and Standards ? IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z ? IEEE 802.1d, IEEE 802.1q, IEEE 802.3ab, IEEE 802.1p ? IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP) ? IEEE 802.1w, IEEE 802.1x, IEEE 802.1s ? IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az ### Hardware Specifications ? Processor: 1 x MIPS, 500 MHz ? RAM: 128 MB SDRAM ? Flash Memory: 32 MB ### Dimensions and Weight ? Width: 17.3 inches ? Depth: 10.2 inches ? Height: 1.7 inches ? Weight: 7.50 lbs ### Connectivity and Expansion ? Interfaces: 24 x 1000BASE-T (RJ-45) PoE+ ? 4 x 1000BASE-X (SFP) ? 1 x Console (RJ-45) for Management ### Increased Connectivity The 24 ports on the HPE JG926A Ethernet Network Switch offer increased connectivity options for users. With a larger number of ports, businesses can connect more devices to their network without the need for additional switches or hubs. This allows for better organization and management of network connections, simplifying the overall network infrastructure. ### Flexibility and Scalability The HPE JG926A Ethernet Network Switch's 24 ports provide flexibility and scalability for businesses. Users can easily add or remove devices from the network without disrupting the entire system. This makes it easier to accommodate future growth and adapt to changing business needs. Additionally, the switch supports features like VLANs (Virtual Local Area Networks), which allow for logical segmentation of the network and improved security. ### Improved Network Performance Having 24 ports on the HPE JG926A Ethernet Network Switch ensures that each connected device has sufficient bandwidth and does not experience congestion or slowdowns. This is especially important in environments where multiple users are simultaneously accessing network resources or transferring large files. The switch's high-performance capabilities ensure smooth data transmission and reduce latency, resulting in improved network performance and user satisfaction. #### Efficient Data Transfer The 24 ports on the HPE JG926A Ethernet Network Switch support Gigabit Ethernet, which offers fast data transfer speeds of up to 1000 Mbps. This allows for quick file transfers and seamless streaming of multimedia content. Users can efficiently share and access data across the network without experiencing delays or bottlenecks. #### Enhanced Productivity With 24 ports, the HPE JG926A Ethernet Network Switch enables businesses to connect multiple devices, promoting collaboration and productivity. Employees can easily connect their computers, printers, and other devices to the network, facilitating seamless communication and resource sharing. This feature is particularly beneficial in office environments where teamwork and data sharing are essential. ##### Cost-Effective Solution The HPE JG926A Ethernet Network Switch's 24 ports offer a cost-effective solution for businesses. Instead of investing in multiple switches, users can consolidate their network infrastructure with a single switch that provides ample connectivity options. This reduces equipment and maintenance costs, making it an economical choice for small to medium-sized businesses. ##### Reliable Network Connectivity The 24 ports on the HPE JG926A Ethernet Network Switch ensure reliable network connectivity for all connected devices. The switch supports features like Quality of Service (QoS), which prioritizes network traffic based on specific requirements. This ensures that critical applications, such as VoIP (Voice over Internet Protocol) or video conferencing, receive uninterrupted network connectivity and optimal performance. ## Power The HPE JG926A Ethernet Network Switch is equipped with Power over Ethernet Plus (PoE+) technology, providing a total power budget of 370W. This feature offers numerous benefits for users, making it an excellent choice for businesses that require both data connectivity and power supply to their network devices. ### Simplified Deployment The PoE+ technology on the HPE JG926A Ethernet Network Switch simplifies the deployment of network devices. With PoE+, users can power devices such as IP phones, wireless access points, and surveillance cameras directly through the Ethernet cable, eliminating the need for separate power adapters. This reduces clutter and makes installation more straightforward, especially in areas where power outlets are limited or inaccessible. ### Cost Savings By utilizing the PoE+ feature of the HPE JG926A Ethernet Network Switch, businesses can save on installation and maintenance costs. The switch eliminates the need for additional electrical wiring and power outlets for connected devices, reducing installation expenses. Moreover, since PoE+ allows for centralized power management, businesses can save on electricity costs by efficiently monitoring and controlling power usage across the network. #### Flexibility in Device Placement The PoE+ technology on the HPE JG926A Ethernet Network Switch provides flexibility in device placement. Users can install network devices in locations where power outlets are not readily available, such as ceilings or walls. This enables businesses to optimize their network infrastructure without being constrained by power supply limitations. #### Improved Reliability The HPE JG926A Ethernet Network Switch's PoE+ capability enhances the reliability of network devices. In case of a power outage, devices connected to the switch continue to receive power through an uninterruptible power supply (UPS) or backup generator. This ensures uninterrupted operation of critical network services, such as IP telephony or surveillance systems. ##### Remote Power Management The HPE JG926A Ethernet Network Switch's PoE+ technology enables remote power management of connected devices. Users can monitor and control the power status of individual ports or devices through a centralized management interface. This allows for efficient troubleshooting and reduces the need for physical intervention in case of power-related issues. ##### Future-Proofing Investing in the HPE JG926A Ethernet Network Switch with PoE+ ensures future-proofing of the network infrastructure. As more devices support PoE+, businesses can easily integrate new technologies into their network without the need for additional power infrastructure upgrades. This scalability and flexibility allow businesses to adapt to evolving technological advancements without significant disruptions or costs. ## Speed The HPE JG926A Ethernet Network Switch offers Gigabit Ethernet speed, providing users with fast and reliable data transmission capabilities. This feature is crucial for businesses that require high-speed connectivity for data-intensive applications and seamless communication. ### Fast Data Transfer The Gigabit Ethernet speed of the HPE JG926A Ethernet Network Switch allows for fast data transfer rates of up to 1000 Mbps. This enables users to quickly transfer large files, such as multimedia content or database backups, between devices connected to the network. Fast data transfer speeds contribute to increased productivity and reduced waiting times. ### Smooth Multimedia Streaming With Gigabit Ethernet, the HPE JG926A Ethernet Network Switch ensures smooth streaming of multimedia content across the network. Users can enjoy high-quality video conferencing, online collaboration, and multimedia presentations without experiencing buffering or lag. This is especially important for businesses that rely on multimedia applications for training, client presentations, or remote collaborations. #### Enhanced User Experience The high-speed connectivity provided by the Gigabit Ethernet speed of the HPE JG926A Ethernet Network Switch enhances the overall user experience. Users can access network resources and cloud-based applications with minimal latency, resulting in a seamless and responsive computing environment. This contributes to improved efficiency, user satisfaction, and productivity. #### Support for Bandwidth-Intensive Applications The Gigabit Ethernet speed of the HPE JG926A Ethernet Network Switch supports bandwidth-intensive applications. This includes applications that require significant network resources, such as video editing, CAD/CAM software, or data-intensive research tools. Users can run these applications smoothly without experiencing network bottlenecks or slowdowns. ##### Future-Proof Investment Investing in the HPE JG926A Ethernet Network Switch with Gigabit Ethernet speed ensures a future-proof network infrastructure. As more devices and applications demand higher bandwidth, businesses can accommodate these requirements without the need for additional infrastructure upgrades. This scalability allows businesses to stay ahead of technological advancements and remain competitive in the ever-changing business landscape. ##### Compatibility with Existing Infrastructure The Gigabit Ethernet speed of the HPE JG926A Ethernet Network Switch is compatible with existing network infrastructure. Users can seamlessly integrate the switch into their current network environment without the need for extensive reconfiguration or replacement of existing devices. This ensures a smooth transition and reduces downtime during the implementation process. ## Interface The HPE JG926A Ethernet Network Switch features SFP (Small Form-factor Pluggable) interfaces, offering versatility and flexibility in network connectivity options. These interfaces provide businesses with the ability to connect to various types of network media, including fiber optic cables. ### Versatile Connectivity The SFP interfaces on the HPE JG926A Ethernet Network Switch enable businesses to connect to different types of network media. Users can choose between copper or fiber optic connections based on their specific requirements. This versatility allows for seamless integration into existing network infrastructures and facilitates connectivity with devices located at different distances. ### Fiber Optic Connectivity The SFP interfaces support fiber optic connectivity on the HPE JG926A Ethernet Network Switch. Fiber optic cables offer several advantages over traditional copper cables, including longer distance transmission, immunity to electromagnetic interference, and higher bandwidth capabilities. Businesses can utilize fiber optic connections for applications that require high-speed and reliable data transfer, such as long-distance network links or connections between buildings. #### Scalability and Future-Proofing The SFP interfaces on the HPE JG926A Ethernet Network Switch offer scalability and future-proofing of the network infrastructure. Users can easily upgrade or change their network media by swapping out the SFP modules. This eliminates the need for extensive reconfiguration or replacement of the entire switch, reducing costs and minimizing disruptions to the network. #### Long-Distance Connectivity Fiber optic connections provided by the SFP interfaces allow for long-distance connectivity. Users can connect devices located in different parts of a building or even in separate buildings without experiencing signal degradation or loss. This is particularly beneficial for businesses with distributed offices or remote locations that require seamless communication and resource sharing. ##### Improved Network Security Fiber optic connections offered by the SFP interfaces on the HPE JG926A Ethernet Network Switch enhance network security. Unlike copper cables, fiber optic cables do not emit electromagnetic signals that can be intercepted or tapped into. This makes fiber optic connections more secure against eavesdropping or unauthorized access, ensuring the privacy and integrity of sensitive data transmitted over the network. ##### High Bandwidth Capabilities Fiber optic connections supported by the SFP interfaces provide high bandwidth capabilities. Businesses can take advantage of these high-speed connections for applications that require large data transfers or real-time streaming, such as video surveillance systems or data centers. The high bandwidth capabilities ensure smooth and uninterrupted data transmission, even in demanding network environments.

HPE JG963A#ABA Managed Switch Specifications ? Manufacturer: HPE ? Part Number: JG963A#ABA ? Device Type: Managed Switch ### Technical Specifications #### Physical Characteristics ? Enclosure Type: Rack-Mountable ? 1U ? Form Factor: 1U Rack-Mountable #### Connectivity ? Subtype: Gigabit Ethernet ? Ports: 48 x 10/100/1000 (PoE+) 2 x 10 Gigabit Ethernet 1 x Gigabit Ethernet SFP+ 2 x 10G Ethernet ? 48 x 10/100/1000 (PoE+) ? 2 x 10 Gigabit Ethernet ? 1 x Gigabit Ethernet SFP+ ? 2 x 10G Ethernet ? Power Over Ethernet (PoE): PoE+ ? PoE Budget: 370 W ### Performance Metrics #### Throughput and Capacity ? Throughput (64-Byte Packet Size): 130.9 MPPS ? Routing/Switching Capacity: 176 Gbps ? IPv4 Routing Table Entries: 32 ? IPv6 Routing Table Entries: 32 ? MAC Address Table Size: 16,384 Entries ? Jumbo Frame Support: Yes #### Protocols and Management ? Routing Protocols: IGMP, Static IPv4 Routing, Static IPv6 Routing ? Remote Management Protocols: SNMP v1, RMON v2, SNMP v3, SNMP v2c, HTTP, HTTPS ? Authentication Method: RADIUS ### Features and Compliance #### Advanced Features ? ARP Support ? Port Mirroring ? Half Duplex and Full Duplex Modes ? Spanning Tree Protocol (STP) Support ? Virtual Route Redundancy Protocol (VRRP) Support ? Access Control List (ACL) Support ? Quality of Service (QoS) ? MLD Snooping ? Equal-Cost Multipath (ECMP) ? STP Root Guard ? LLDP Support ? Link Aggregation Control Protocol (LACP) ? Packet Storm Protection ? Class of Service (CoS) #### Compliant Standards ? IEEE 802.3 ? IEEE 802.3u ? IEEE 802.3i ? IEEE 802.3z ? IEEE 802.1d ? IEEE 802.1q ? IEEE 802.3ab ? IEEE 802.1p ? IEEE 802.3af ? IEEE 802.3x ? IEEE 802.3ad (LACP) ? IEEE 802.1w ? IEEE 802.1x ? IEEE 802.1s ? IEEE 802.1ab (LLDP) ? IEEE 802.3at ### Memory and Expansion ? RAM: 1 GB SDRAM ? Flash Memory: 128 MB ? Expansion Slots: 1 x 1000Base-T ? RJ-45 ? PoE+ 2 x Gigabit / 10Gbit LAN ? SFP+ 2 x 10G Base-T ? RJ-45 1 x Console ? RJ-45 ? Management ? 1 x 1000Base-T ? RJ-45 ? PoE+ ? 2 x Gigabit / 10Gbit LAN ? SFP+ ? 2 x 10G Base-T ? RJ-45 ? 1 x Console ? RJ-45 ? Management ### Dimensions and Weight ? Width: 17.3 inches ? Depth: 16.5 inches ? Height: 1.7 inches ? Weight: 15.43 lbs ## Ports The HPE 1950 48g PoE Rack-Mountable Managed Switch is equipped with an impressive 48 ports, making it an ideal choice for businesses and organizations that require a high-performance network infrastructure. These ports provide users with the ability to connect numerous devices, such as computers, printers, servers, and IP phones, to the network simultaneously. ### Increased Connectivity The sheer number of ports on the HPE 1950 48g PoE Managed Switch allows for increased connectivity within a network. This is particularly important for businesses that rely heavily on technology and require a large number of devices to be connected to the network at any given time. With 48 ports available, users can easily expand their network and connect multiple devices without the need for additional switches or complicated network configurations. #### Improved Efficiency Having 48 ports on a single switch eliminates the need for multiple switches or cascading, which can lead to increased complexity and potential performance issues. With all devices connected directly to the HPE 1950 48g PoE Managed Switch, data can be transmitted more efficiently, leading to improved network performance and reduced latency. This is particularly beneficial for businesses that rely on real-time data transfer or applications that require high bandwidth. #### Cost Savings By providing 48 ports in a single switch, the HPE 1950 48g PoE Managed Switch offers significant cost savings compared to purchasing multiple smaller switches. Not only does this reduce the upfront cost of purchasing additional hardware, but it also lowers ongoing maintenance and management expenses. With fewer switches to manage, IT personnel can focus their efforts on other critical tasks, saving both time and money. ### Power over Ethernet (PoE) In addition to the impressive number of ports, the HPE 1950 48g PoE Managed Switch also supports Power over Ethernet (PoE) technology. This feature allows the switch to provide power to connected devices, such as IP phones, wireless access points, and IP cameras, through the Ethernet cable. This eliminates the need for separate power cables and power adapters, simplifying installation and reducing cable clutter. #### Flexibility and Convenience With PoE support, the HPE 1950 48g PoE Managed Switch offers users greater flexibility and convenience when deploying network devices. Users can easily install PoE-enabled devices in locations where power outlets are not readily available, such as ceilings or walls. This is particularly advantageous for businesses that require flexible network configurations or frequently move their devices. #### Cost-Effective Deployment The ability to provide power through the Ethernet cable eliminates the need for additional electrical infrastructure, resulting in cost savings during deployment. Users can avoid the expense of hiring electricians or running new power cables to each device location. Additionally, PoE allows for centralized power management, enabling users to monitor and control power usage more efficiently. ##### Energy Efficiency The HPE 1950 48g PoE Managed Switch is designed with energy efficiency in mind. With PoE technology, power is delivered only when needed, reducing energy consumption during periods of low activity or device inactivity. This not only helps businesses reduce their carbon footprint but also lowers electricity costs over time. ## Part Number The part number of the HPE 1950 48g PoE Rack-Mountable Managed Switch is JG963A#ABA. This unique identifier is crucial for users who are looking to purchase or manage multiple switches within their network infrastructure. ### Easy Identification The part number serves as a quick and easy way to identify the specific model of the switch. With numerous switch models available in the market, having a distinct part number ensures that users can easily locate and purchase the correct switch without confusion or errors. This is particularly important for businesses that require multiple switches to be deployed across different locations or departments. #### Compatibility and Scalability The part number also plays a vital role in ensuring compatibility and scalability within a network infrastructure. By identifying the specific model, users can verify if the switch meets their requirements in terms of features, performance, and compatibility with other network devices. This allows for seamless integration and expansion of the network as the business grows or technology needs evolve. #### Warranty and Support The part number is often associated with warranty and support information provided by the manufacturer. Users can refer to the part number to determine warranty coverage, duration, and available support options. This helps users make informed decisions about maintenance and support requirements, ensuring uninterrupted network operation and minimizing downtime in case of any issues. ### Efficient Inventory Management For businesses that manage a large number of switches or maintain an inventory of network equipment, the part number becomes an essential tool for efficient inventory management. By tracking the part number, businesses can accurately manage stock levels, plan for replacements or upgrades, and ensure that spare parts are readily available when needed. This helps streamline operations, reduce downtime, and optimize resource allocation. ##### Consistency and Standardization Using part numbers across different models promotes consistency and standardization within an organization's network infrastructure. It allows users to easily identify and differentiate between various models, reducing confusion or mistakes during installation or troubleshooting. Furthermore, standardizing on specific part numbers simplifies procurement processes and ensures that the organization maintains a unified network environment. In conclusion, the HPE 1950 48g PoE Rack-Mountable Managed Switch offers users an abundance of ports for increased connectivity, improved efficiency, and cost savings. The Power over Ethernet (PoE) capability adds flexibility, convenience, and cost-effective deployment options. The part number, JG963A#ABA, facilitates easy identification, compatibility, scalability, warranty management, and efficient inventory management. These features make the HPE 1950 48g PoE Managed Switch a reliable and valuable asset for businesses and organizations seeking a high-performance network infrastructure solution.

Product Overview ### General Information ? Manufacturer: HP ? Part Number: JG961-61101 ? Category: Networking ? Product Type: Managed Switch ### Device Specifications ? Model: Switch with 48 Ports ? Functionality: Layer 3, Managed, Stackable ? Form Factor: Rack-Mountable (1U) ? Connection Type: Gigabit Ethernet ? Ports: 48 x 10/100/1000 Mbps Ethernet 2 x Gigabit SFP 2 x 10 Gigabit SFP+ 2 x 10G Ethernet ? 48 x 10/100/1000 Mbps Ethernet ? 2 x Gigabit SFP ? 2 x 10 Gigabit SFP+ ? 2 x 10G Ethernet ### Performance Metrics ? Throughput: Up to 130.9 Mpps (64-Byte Packet Size) ? Routing/Switching Capacity: 176 Gbps ? Static Routes Capacity: 32 ? Virtual Interfaces (VLANs): 8 ? IPv4 Routing Table Entries: 32 ? IPv6 Routing Table Entries: 32 ? MAC Address Table Size: 16,384 Entries ? Jumbo Frame Support: 10KB ### Routing and Management ? Routing Protocols: IGMP, VRRP, Static IPv4 Routing, Static IPv6 Routing, ECMP ? Remote Management Protocols: SNMP v1, RMON v2, SNMP v2c, SNMP v3, HTTP, HTTPS, CLI ### Key Features ? Auto-Uplink (Auto MDI/MDI-X) ? IGMP Snooping ? Port Mirroring ? Spanning Tree Protocol (STP) Support ? Access Control List (ACL) Support ? Quality of Service (QoS) ? STP Root Guard ? Link Aggregation Control Protocol (LACP) ? DHCP Client ? Packet Storm Protection ? Class of Service (CoS) ### Compliance Standards ? IEEE 802.3 ? IEEE 802.3i ? IEEE 802.3z ? IEEE 802.1d ? IEEE 802.1q ? IEEE 802.1p ? IEEE 802.3x ? IEEE 802.3ad (LACP) ? IEEE 802.1w ? IEEE 802.1x ? IEEE 802.1s ? IEEE 802.1ab (LLDP) ? IEEE 802.3at ### Memory and Expansion ? RAM: 1 GB (SDRAM) ? Flash Memory: 128 MB ### Interfaces and Connectivity ? 48 x 1000Base-T (RJ-45) ? 2 x Gigabit/10Gbit LAN (SFP+) ? 2 x 10GBase-T (RJ-45) ? 1 x Console (RJ-45) - Management ### Power Requirements ? Power Supply: Internal ? Voltage Required: AC 120/230 V (50/60 Hz) ## Ports The HP 1950 48G Managed Rack-Mountable switch is equipped with an impressive number of 48 ports. This abundance of ports is a standout feature of this switch, making it an ideal choice for businesses and organizations that require a high level of connectivity. ### Increased Connectivity With 48 ports available, the HP 1950 48G Managed Rack-Mountable switch allows for a significant increase in connectivity options. This means that users can connect a large number of devices to the switch simultaneously, without worrying about running out of available ports. Whether it's computers, printers, servers, or other network devices, this switch can handle them all. #### Flexibility in Network Expansion The 48 ports provided by this switch also offer flexibility when it comes to network expansion. As businesses grow and their networking needs evolve, having the ability to easily add new devices to the network becomes crucial. With the HP 1950 48G Managed Rack-Mountable switch, users can simply connect new devices to the available ports without the hassle of purchasing additional networking equipment. ##### Streamlined Network Management Having a large number of ports on a single switch simplifies network management. Instead of dealing with multiple switches and the associated complexity, users can consolidate their network infrastructure by connecting all devices to this one central switch. This streamlines network management tasks such as monitoring, troubleshooting, and configuration changes. ## Switch Type The HP 1950 48G Managed Rack-Mountable switch is classified as a Layer 3 switch, which is a significant advantage for users in terms of network performance and functionality. ### Enhanced Network Performance Layer 3 switches offer superior performance compared to Layer 2 switches. They are capable of routing traffic at wire speed, meaning that data can be transferred between different subnets or VLANs without any noticeable delay. This is particularly beneficial for businesses that require high-speed data transfer, such as those dealing with large file transfers or real-time applications. #### Improved Network Segmentation Layer 3 switches enable network segmentation, allowing administrators to divide the network into smaller, more manageable subnets or VLANs. This provides enhanced security and performance optimization by isolating different departments or groups within the organization. It also allows for more efficient use of network resources and easier implementation of access control policies. ##### Advanced Routing Capabilities One of the key advantages of Layer 3 switches is their ability to perform advanced routing functions. They can handle dynamic routing protocols such as OSPF (Open Shortest Path First) and BGP (Border Gateway Protocol), which are essential for large networks with multiple routers. This enables seamless communication between different network segments and ensures optimal routing paths for data transmission. ## Part Number The HP 1950 48G Managed Rack-Mountable switch has a specific part number, JG961-61101, which is important for users when it comes to identifying and obtaining the correct switch model. ### Easy Identification With a unique part number like JG961-61101, users can easily identify the exact model of the HP 1950 48G Managed Rack-Mountable switch they need. This eliminates any confusion or potential compatibility issues that may arise from using a different model or version of the switch. #### Efficient Procurement Having a specific part number simplifies the procurement process for businesses and organizations. They can easily communicate the part number to their suppliers or resellers, ensuring that they receive the correct switch model without any delays or errors. This saves time and prevents any disruptions in network infrastructure upgrades or replacements. ##### Warranty and Support The part number, JG961-61101, is also important when it comes to warranty and support services. Users can refer to the part number when seeking technical assistance or warranty claims. It ensures that they receive the appropriate level of support specifically tailored to their HP 1950 48G Managed Rack-Mountable switch model.