## Key Features of the C9200CX-12P-2X2G-A Switch ### Device Specifications ? Device Type: 12-Port Managed Layer 3 Switch ? Form Factor: Rack-Mountable 1U ? Port Type: Gigabit Ethernet ### Port Configuration ? Ports: 12 x 10/100/1000 (PoE+) 2 x 1000BASE-T 2 x 10 Gigabit SFP+ (Uplink) ? 12 x 10/100/1000 (PoE+) ? 2 x 1000BASE-T ? 2 x 10 Gigabit SFP+ (Uplink) ? Power Over Ethernet (PoE): PoE+ ? PoE Budget: 240W ### Performance Metrics ? Switching Capacity: 120 Gbps ? Forwarding Rate: 95.23 Mpps ? Packet Buffer Size: 6 MB #### Capacity Details ? Virtual Networks: 16 ? IPv4 Routes: Total: 14,000 Direct: 10,000 Indirect: 4,000 ? Total: 14,000 ? Direct: 10,000 ? Indirect: 4,000 ? IPv6 Routing Entries: 2,000 ? Multicast Scale: 1,000 ? QoS Entries: 1,000 ? ACL Entries: 1,600 ? Flexible NetFlow Entries: 16,000 ? VLAN IDs: 4,096 ? PVST Instances: 128 ? STP Virtual Ports for PVST/MST: 13,000 each ### MAC Address Table ? Size: 32,000 Entries ### Jumbo Frame Support ? Maximum Frame Size: 9,198 Bytes ### Routing Protocols ? OSPF, RIP, RIP-1, RIP-2 ? EIGRP, VRRP, PIM-SM ? EIGRP for IPv6, OSPFv3 ? PIM-SSM, Policy-Based Routing (PBR) ? RIPNG, MSTP ### Management and Security ? Remote Management: SNMP v1, v2c, v3 RMON 1, RMON 2 CLI, NETCONF, RESTCONF, YANG ? SNMP v1, v2c, v3 ? RMON 1, RMON 2 ? CLI, NETCONF, RESTCONF, YANG ? Encryption: 128-bit AES ? Access Control: ACL Support ? Quality of Service: QoS Support ? Other Features: Rapid PVST+ Fanless Design Shaped Round Robin (SRR) PXE Support Remote Switch Port Analyzer (RSPAN) NetFlow, Energy Efficient Ethernet Management Information Base (MIB) Class of Service (CoS) Flexible NetFlow (FNF) 802.1x Authentication DiffServ Code Point (DSCP) Support MACsec Support Control Plane Protection (CoPP) Switched Port Analyzer (SPAN) Embedded Event Manager (EEM) Protocol Independent Multicast (PIM) First Hop Security (FHS) PVLAN Support Committed Information Rate (CIR) ? Rapid PVST+ ? Fanless Design ? Shaped Round Robin (SRR) ? PXE Support ? Remote Switch Port Analyzer (RSPAN) ? NetFlow, Energy Efficient Ethernet ? Management Information Base (MIB) ? Class of Service (CoS) ? Flexible NetFlow (FNF) ? 802.1x Authentication ? DiffServ Code Point (DSCP) Support ? MACsec Support ? Control Plane Protection (CoPP) ? Switched Port Analyzer (SPAN) ? Embedded Event Manager (EEM) ? Protocol Independent Multicast (PIM) ? First Hop Security (FHS) ? PVLAN Support ? Committed Information Rate (CIR) ? Standards Compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3z IEEE 802.1d, IEEE 802.1q, IEEE 802.3ab IEEE 802.1p, IEEE 802.3af, IEEE 802.3x IEEE 802.3ad (LACP), IEEE 802.1w IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae IEEE 802.3at ? IEEE 802.3, IEEE 802.3u, IEEE 802.3z ? IEEE 802.1d, IEEE 802.1q, IEEE 802.3ab ? IEEE 802.1p, IEEE 802.3af, IEEE 802.3x ? IEEE 802.3ad (LACP), IEEE 802.1w ? IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae ? IEEE 802.3at ### Memory and Expansion ? RAM: 4 GB ? Flash Memory: 8 GB ? Built-in Devices: RFID Tag ? Status Indicators: Power #### Expansion and Connectivity ? Interfaces: 12 x 1000BASE-T RJ-45 PoE+ – 30W 2 x 1000BASE-T RJ-45 2 x 10GBASE-X SFP+ Uplink 1 x USB 2.0 1 x Console (Micro-USB) ? 12 x 1000BASE-T RJ-45 PoE+ – 30W ? 2 x 1000BASE-T RJ-45 ? 2 x 10GBASE-X SFP+ Uplink ? 1 x USB 2.0 ? 1 x Console (Micro-USB) ? Expansion Slots: 1 (total) / 1 (free) x SD Memory Card ### Power Specifications ? Power Device: Internal Power Supply ? Power Provided: 310 Watts ? Voltage Required: AC 100-240 V (50/60 Hz) ## Ports The Cisco Catalyst 9200CX Network Switch is equipped with 12 ports, making it an ideal choice for businesses and organizations that require a high-performing and reliable network infrastructure. These ports provide numerous benefits and are crucial for ensuring seamless connectivity and efficient data transfer within the network. ### Increased Connectivity With 12 ports, the Cisco Catalyst 9200CX Network Switch offers users the ability to connect multiple devices simultaneously. This is particularly important for businesses with a large number of employees or those that require a significant number of devices to be connected to the network. Whether it’s computers, printers, servers, or other network-enabled devices, having ample ports ensures that all devices can be connected without any limitations. #### Enhanced Productivity The availability of multiple ports on the Cisco Catalyst 9200CX Network Switch enables employees to efficiently carry out their tasks without any interruptions. Each device connected to a port can function independently, allowing employees to access network resources and collaborate seamlessly. This leads to increased productivity as employees can work on their assigned tasks without waiting for network resources or experiencing delays caused by congested ports. #### Flexibility and Scalability The 12 ports on the Cisco Catalyst 9200CX Network Switch provide flexibility and scalability for growing businesses. As businesses expand and add more devices to their network, having additional ports allows for easy integration of new devices without the need for additional switches or complex network reconfigurations. This flexibility also allows businesses to adapt quickly to changing networking requirements without incurring significant costs or disruptions. #### Efficient Data Transfer The Cisco Catalyst 9200CX Network Switch’s 12 ports ensure efficient data transfer within the network. Each port supports high-speed data transmission rates and can handle large volumes of data simultaneously. This is particularly beneficial for businesses that deal with data-intensive applications or rely heavily on real-time data transfers. With 12 ports, the switch can handle the increased network traffic, ensuring smooth data flow and minimizing latency. ##### Redundancy and Resiliency Having 12 ports on the Cisco Catalyst 9200CX Network Switch also provides redundancy and resiliency to the network infrastructure. In the event of a port failure, the remaining ports can continue to function without any disruption to the network operations. This redundancy ensures that critical network services remain available, minimizing downtime and improving overall network reliability. ## Uplink Ports The Cisco Catalyst 9200CX Network Switch features 2 uplink ports, which offer additional benefits and play a crucial role in connecting the switch to other networking devices or external networks. These uplink ports enhance network performance and provide advanced connectivity options for businesses. ### Higher Bandwidth The 2 uplink ports on the Cisco Catalyst 9200CX Network Switch support higher bandwidth capabilities compared to regular ports. This allows for faster data transfer rates and improved network performance. Businesses that require rapid data transfers, such as multimedia streaming, video conferencing, or large file sharing, can benefit significantly from these high-bandwidth uplink ports. #### Interconnectivity The uplink ports on the Cisco Catalyst 9200CX Network Switch enable seamless interconnectivity between switches, routers, or other networking devices. This allows businesses to create a more extensive and interconnected network infrastructure. By connecting multiple switches through the uplink ports, businesses can expand their network coverage and ensure efficient communication between different departments or remote locations. #### Aggregation of Network Traffic Another key benefit of the uplink ports is their ability to aggregate network traffic. By connecting multiple switches through these ports, businesses can consolidate network traffic from various sources into a single link. This aggregation helps optimize network performance by avoiding congestion and distributing the load evenly across the network infrastructure. It also simplifies network management, as administrators can monitor and control network traffic more effectively. #### Redundancy and Failover The 2 uplink ports on the Cisco Catalyst 9200CX Network Switch also offer redundancy and failover capabilities. By connecting the switch to multiple uplink devices or networks, businesses can ensure that network operations remain uninterrupted even in the event of a link failure. This redundancy provides a backup connection and improves network resiliency, minimizing downtime and ensuring continuous availability of critical services. ## Uplink Speed The Cisco Catalyst 9200CX Network Switch boasts a 2x2G uplink speed, which delivers high-speed data transfer capabilities to meet the demands of modern networking environments. This feature offers several benefits and is essential for businesses that require fast and reliable network connectivity. ### Fast Data Transfer The 2x2G uplink speed on the Cisco Catalyst 9200CX Network Switch ensures fast data transfer between the switch and other networking devices or external networks. This is particularly crucial for businesses that rely on real-time data processing or require quick access to network resources. With the high-speed uplink, data can be transferred rapidly, minimizing latency and ensuring smooth operation of data-intensive applications. #### Improved Network Performance The high uplink speed significantly improves overall network performance. By enabling fast data transfer, businesses can experience reduced bottlenecks and improved response times. This is particularly beneficial for businesses that deal with large volumes of data or require rapid access to network resources. With the 2x2G uplink speed, the Cisco Catalyst 9200CX Network Switch can handle high network traffic loads efficiently, ensuring uninterrupted operations. #### Enhanced User Experience The 2x2G uplink speed also enhances the user experience by delivering a seamless and lag-free network connection. Whether it’s browsing the internet, accessing cloud-based applications, or transferring files, users can enjoy a fast and responsive network experience. This is especially important in modern workplaces where employees rely heavily on network connectivity to carry out their tasks efficiently. The high uplink speed ensures that users can access network resources quickly and without any delays. #### Future-Proofing Investing in a network switch with a high uplink speed like the Cisco Catalyst 9200CX Network Switch ensures future-proofing for businesses. As network demands continue to increase with the adoption of bandwidth-intensive technologies and the growth of data-driven applications, having a switch capable of handling high-speed data transfer becomes essential. The 2x2G uplink speed allows businesses to stay ahead of evolving networking requirements and ensures compatibility with future network upgrades or expansions. In conclusion, the Cisco Catalyst 9200CX Network Switch’s 12 ports, 2 uplink ports, and 2x2G uplink speed provide businesses with a robust and high-performance networking solution. The multiple ports offer increased connectivity, flexibility, and efficient data transfer, while the uplink ports enable advanced connectivity options and enhance network performance. The high uplink speed ensures fast data transfer, improved network performance, enhanced user experience, and future-proofing capabilities. With these features, businesses can build a reliable and scalable network infrastructure that meets their current needs and adapts to future growth.